19-2184; Rev 0; 10/01 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches Features ♦ +3V Logic-Compatible Digital Inputs VIH = 2.0V VIL = 0.8V ♦ Pin Compatible with MAX312/MAX313/MAX314 and DG411/DG412/DG413 ♦ Low On-Resistance (10Ω max) ♦ Guaranteed RON Match Between Channels (1.5Ω max) ♦ Guaranteed RON Flatness over Specified Signal Range (2Ω max) ♦ Crosstalk > 96dB at 20kHz ♦ Single-Supply Operation: +4.5V to +36V Dual-Supply Operation: ±4.5V to ±20V Applications Test Equipment ♦ Rail-to-Rail® Signal Handling Communication Systems Ordering Information PBX, PABX Systems Audio Signal Routing PART TEMP. RANGE PIN-PACKAGE Avionics MAX312LCUE 0°C to +70°C 16 TSSOP Sample-and-Hold Circuits MAX312LCSE 0°C to +70°C 16 Narrow SO MAX312LCPE 0°C to +70°C 16 Plastic DIP MAX312LEUE -40°C to +85°C 16 TSSOP MAX312LESE -40°C to +85°C 16 Narrow SO MAX312LEPE -40°C to +85°C 16 Plastic DIP Data-Acquisition Systems xDSL Modems Ordering Information continued at end of data sheet. Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. Pin Configurations TOP VIEW IN1 1 16 IN2 COM1 2 15 COM2 14 NC2 NC1 3 V- 4 13 V+ IN1 1 16 IN2 COM1 2 15 COM2 14 NO2 NO1 3 V- 4 13 V+ MAX312L IN1 1 16 IN2 COM1 2 15 COM2 14 NC2 NO1 3 V- 4 13 V+ MAX313L MAX314L GND 5 12 N.C. GND 5 12 N.C. GND 5 12 N.C. NC4 6 11 NC3 NO4 6 11 NO3 NO4 6 11 NC3 10 COM3 COM4 7 9 IN4 8 IN3 10 COM3 COM4 7 9 IN4 8 DIP/SO/TSSOP DIP/SO/TSSOP MAX312L LOGIC SWITCH MAX313L LOGIC SWITCH 0 1 ON OFF 0 1 OFF ON SWITCHES SHOWN FOR LOGIC "0" INPUT IN3 10 COM3 COM4 7 9 IN4 8 IN3 DIP/SO/TSSOP LOGIC 0 1 MAX314L SWITCHES SWITCHES 1, 4 2, 3 OFF ON ON OFF ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 MAX312L/MAX313L/MAX314L General Description Maxim’s MAX312L/MAX313L/MAX314L analog switches feature low on-resistance (10Ω max) and 1.5Ω onresistance matching between channels. These switches are +3V logic compatible when powered from ±15V or +12V supplies. The switches conduct equally well in either direction, and offer low leakage over temperature (2.5nA at +85°C). The MAX312L/MAX313L/MAX314L are quad, singlepole/single-throw (SPST) analog switches. The MAX312L is normally closed (NC), and the MAX313L is normally open (NO). The MAX314L has two NC switches and two NO switches. All three devices operate from a single +4.5V to +36V supply or from dual ±4.5V to ±20V, and are available in 16-pin TSSOP, SO, and DIP packages. MAX312L/MAX313L/MAX314L 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches ABSOLUTE MAXIMUM RATINGS (Voltages Referenced to GND) V+ ...........................................................................-0.3V to +44V V- ............................................................................+0.3V to -44V V+ to V-...................................................................-0.3V to +44V VIN_ to V- ................................................................-0.3V to +44V All Other Pins (Note 1) ..........................(V- - 0.3V) to (V+ + 0.3V) Continuous Current (COM_, NO_, NC_) ........................±100mA Peak Current (COM_, NO_, NC_) (pulsed at 1ms, 10% duty cycle max) ........................±300mA Continuous Power Dissipation (TA = +70°C) TSSOP (derate 6.7mW/°C above +70°C) ...................457mW Narrow SO (derate 8.70mW/°C above +70°C) ...........696mW Plastic DIP (derate 10.53mW/°C above +70°C) .........842mW Operating Temperature Ranges MAX31_LC_E .....................................................0°C to +70°C MAX31_LE_E ..................................................-40°C to +85°C Storage Temperature Range ............................-65°C to +150°C Junction Temperature ......................................................+150°C Lead Temperature (soldering, 10s) .................................+300°C Note 1: Signals on COM_, NO_, or NC_ exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS—Dual Supplies (V+ = +15V, V- = -15V, GND = 0, VIH = 2.0V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS TA MIN TYP MAX UNITS V+ V ANALOG SWITCH Analog Signal Range On-Resistance On-Resistance Match Between Channels (Note 4) On-Resistance Flatness (Note 5) Off-Leakage Current (NO_ or NC_) (Note 6) VCOM_, VNO_, VNC_ V+25°C RON ICOM_ = 10mA, VNO_ or VNC_ = ±10V TMIN to TMAX ∆RON ICOM_ = 10mA, VNO_ or VNC_ = ±10V TMIN to TMAX ICOM_ = 10mA, VNO_ or VNC_ = -5V, 0, 5V TMIN to TMAX RFLAT(ON) INO INC VCOM_ = +10V, VNO_ or VNC_ = ±10V COM Off-Leakage Current (Note 6) ICOM(OFF) VCOM_ = ±10V, VNO_ or VNC_ = +10V COM On-Leakage Current (Note 6) ICOM(ON) VNO_ or VNC_ = ±10V, VCOM_ = ±10V 6.5 10 15 +25°C 0.3 1.5 3 +25°C 0.2 2 4 +25°C -0.5 TMIN to TMAX -2.5 +25°C -0.5 TMIN to TMAX -2.5 +25°C -1 TMIN to TMAX -5 -0.02 0.5 2.5 -0.02 0.5 2.5 -0.04 1 5 Ω Ω Ω nA nA nA DYNAMIC 2 Turn-On Time tON VCOM_ = ±10V, RL = 300Ω, CL = 35pF, Figure 1 +25°C Turn-Off Time tOFF VCOM_ = ±10V, RL = 300Ω, CL = 35pF, Figure 1 +25°C 115 TMIN to TMAX 225 275 100 TMIN to TMAX 185 235 Break-Before-Make Time Delay (MAX314L only, Note 7) tD RL = 300Ω, CL = 35pF, Figure 2 +25°C 1 10 Charge Injection (Note 7) Q VGEN = 0, RGEN = 0, CL = 1.0nF, Figure 3 +25°C -30 20 _______________________________________________________________________________________ ns ns ns 30 pC 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches (V+ = +15V, V- = -15V, GND = 0, VIH = 2.0V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS TA MIN TYP MAX UNITS Off-Isolation (Note 8) VISO f = 1MHz, RL = 50Ω, CL = 5pF, Figure 4 +25°C -75 dB Crosstalk (Note 9) VCT f = 1MHz, RL = 50Ω, CL = 5pF, Figure 5 +25°C -85 dB f = 1MHz, Figure 6 +25°C 15 pF f = 1MHz, Figure 6 +25°C 15 pF f = 1MHz, Figure 6 +25°C 47 pF NC_ or NO_ Off-Capacitance COM_ Off-Capacitance On-Capacitance COFF CCOM_ (OFF) CON LOGIC INPUT Input Logic High VIH Input Logic Low VIL 2.0 Input Current with Input Logic High IINH IN_ = 2.0V -0.5 Input Current with Input Logic Low IINL IN_ = 0.8V -0.5 V 0.8 V 0.005 0.5 µA 0.005 0.5 µA ±20.0 V POWER SUPPLY Power-Supply Range Positive Supply Current Negative Supply Current Ground Current V+, V- I+ I- IGND ±4.5 V+ = +16.5V, V- = -16.5V, VIN = 0 or V+ +25°C 0.01 V+ = +16.5V, V- = -16.5V, VIN = 5V +25°C V+ = +16.5V, V- = -16.5V, VIN = 0 or 5V +25°C 1 TMIN to TMAX 5 V+ = +16.5V, V- = -16.5V, VIN = 0 or V+ +25°C V+ = +16.5V, V- = -16.5V, VIN = 5V +25°C TMIN to TMAX 1 5 130 TMIN to TMAX 200 µA 300 0.01 TMIN to TMAX 1 5 130 TMIN to TMAX µA 200 µA 300 ELECTRICAL CHARACTERISTICS—Single Supply (V+ = +12V, V- = 0, GND = 0, VIH = 2.0V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS TA MIN TYP MAX UNITS V+ V ANALOG SWITCH Analog Signal Range On-Resistance VCOM_, VNO_, VNC_ RON 0 ICOM_ = 10mA, VNC_ or VNO_ = +10V +25°C TMIN to TMAX 12.5 25 35 Ω _______________________________________________________________________________________ 3 MAX312L/MAX313L/MAX314L ELECTRICAL CHARACTERISTICS—Dual Supplies (continued) MAX312L/MAX313L/MAX314L 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches ELECTRICAL CHARACTERISTICS—Single Supply (continued) (V+ = +12V, V- = 0, GND = 0, VIH = 2.0V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 2, 3) PARAMETER On-Resistance Match Between Channels (Note 4) On-Resistance Flatness (Note 5) SYMBOL CONDITIONS TA MIN +25°C ∆RON ICOM_ = 10mA, VNO_ or VNC_ = +10V ICOM_ = 10mA, VNO_ or VNC_ = +2V, +6V, +10V +25°C RFLAT(ON) TYP MAX 0.3 2 TMIN to TMAX 2.5 1.7 TMIN to TMAX 3.5 4.5 UNITS Ω Ω DYNAMIC Turn-On Time tON VCOM_ = 8V, RL = 300Ω, CL = 35pF, Figure 1 +25°C Turn-Off Time tOFF VCOM_ = 8V, RL = 300Ω, CL = 35pF, Figure 1 +25°C 165 TMIN to TMAX 425 117 TMIN to TMAX Break-Before-Make Time Delay (MAX314L only, Note 7) tD RL = 300Ω, CL = 35pF, Figure 2 +25°C Charge Injection Q Figure 3, CL = 1.0nF, VGEN = 0, RGEN = 0, +25°C 325 175 225 1 ns ns 5 ns -10 pC LOGIC INPUT Input Logic High VIH Input Logic Low VIL 2.0 Input Current with Input Logic High IINH IN_ = 2.0V -0.5 Input Current with Input Logic Low IINL IN_ = 0.8V -0.5 V 0.8 V 0.005 0.5 µA 0.005 0.5 µA +36 V POWER SUPPLY Power-Supply Range V+ +4.5 V+ = +13.2V, VIN = 0 or V+ Positive Supply Current I+ V+ = +13.2V, VIN = 5V +25°C 0.01 TMIN to TMAX +25°C 1 5 25 TMIN to TMAX 125 µA 175 Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 3: -40°C specifications are guaranteed by design. Note 4: ∆RON = ∆RON max - ∆RON min. Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note 6: Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C. Note 7: Guaranteed by design. Note 8: Off-isolation = 20log10 [VCOM/(VNC or VNO)], VCOM = output, VNC or VNO = input to off switch. Note 9: Between any two switches. 4 _______________________________________________________________________________________ 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches ON-RESISTANCE vs. VCOM (SINGLE SUPPLY) 30 V+ = +10V 20 V+ = +15V 7 6 5 6 3 V+ = +20V, V- = -20V 2 V+ = +20V 0 0 VCOM (V) 10 0 20 5 TA = +85°C TA = +70°C 12 8 TA = +25°C -5 5 CHARGE INJECTION vs. VCOM 80 60 V+ = +15V, V- = -15V 40 0.1 ON-LEAKAGE 20 0 0.01 OFF-LEAKAGE -20 V+ = +12V, V- = 0 -40 TA = -40°C V+ = +12V, V- = 0 -60 0.0001 0 3 6 9 12 -40 -15 10 35 60 VCOM (V) TEMPERATURE (°C) SUPPLY CURRENT vs. TEMPERATURE TOTAL HARMONIC DISTORTION vs. FREQUENCY 0.1 MAX312/3/4L toc07 0.01 V+ = +16.5V V- = -16.5V VIN = +16.5V 15 OFF- AND ON-LEAKAGE CURRENT vs. TEMPERATURE 0.001 0 -15 85 -10 -5 0 5 10 15 VCOM (V) V+ = +15V, V- = -15V, 5VRMS SIGNAL 22kHz BANDWIDTH FREQUENCY RESPONSE 0 ON-RESPONSE -20 I+ I- LOSS (dB) 0.01 0.0001 THD (%) I+, I-, IL (µA) -15 VCOM (V) V+ = +15V, V- = -15V, VCOM = +10V 1 4 0.001 20 MAX312/3/4L toc08 RON (Ω) 16 15 10 LEAKAGE CURRENT (nA) 20 MAX312/3/4L toc04 ON-RESISTANCE vs. VCOM AND TEMPERATURE (SINGLE SUPPLY) 10 TA = -40°C VCOM (V) Q (pC) -10 V+ = +15V, V- = -15V 2 MAX312/3/4L toc05 -20 TA = +25°C 4 10 4 TA = +70°C 8 MAX312/3/4L toc06 8 V+ = +12V TA = +85°C 9 MAX312/3/4L toc09 RON (Ω) RON (Ω) V+ = +15V, V- = -15V V+ = +10V, V- = -10V 10 RON (Ω) V+ = +5V 12 10 V- = 0 MAX312/3/4L toc02 V+ = +5V, V- = -5V 14 40 MAX312/3/4L toc01 16 ON-RESISTANCE vs. VCOM AND TEMPERATURE (DUAL SUPPLIES) MAX312/3/4L toc03 ON-RESISTANCE vs. VCOM (DUAL SUPPLIES) RL = 600Ω 0.00001 0.001 RL = 100kΩ IGND -40 OFF-ISOLATION -60 0.000001 MEASUREMENT LIMIT 0.0000001 0.0001 -40 -15 10 35 TEMPERATURE (°C) 60 85 -80 10 100 1k FREQUENCY (Hz) 10k 100k 0.1 1 10 100 1000 FREQUENCY (MHz) _______________________________________________________________________________________ 5 MAX312L/MAX313L/MAX314L Typical Operating Characteristics (TA = +25°C, unless otherwise noted.) Typical Operating Characteristics (continued) (TA = +25°C, unless otherwise noted.) 10 0 IGND -10 -20 -30 V+ = +16.5V, V- = -16.5V, ALL CHANNELS ON -40 3 6 9 12 tOFF 95 140 tOFF 120 85 100 -15 15 -10 -5 0 5 10 15 0 3 6 9 VCOM (V) VCOM (V) TURN-ON/TURN-OFF TIME vs. TEMPERATURE LOGIC THRESHOLD vs. SUPPLY VOLTAGE TURN-ON/TURN-OFF TIME vs. SUPPLY VOLTAGE tON 120 100 tOFF 80 SINGLE SUPPLY 1.6 1.4 DUAL SUPPLIES 1.2 1.0 60 0 25 50 TEMPERATURE (°C) 75 100 600 500 400 300 tON tOFF 200 0.8 -25 12 MAX312/3/4L toc15 1.8 700 TURN-ON/TURN-OFF TIME (ns) 140 2.0 LOGIC THRESHOLD (V) MAX312/3/4L toc13 V+ = +15V, V- = -15V -50 160 LOGIC INPUT VOLTAGE (V) 160 6 105 V+ = +12V, V- = 0 tON V+ = +15V, V- = -15V -50 0 tON MAX312/3/4L toc14 SUPPLY CURRENT (µA) 20 115 180 TURN-ON/TURN-OFF TIME (ns) I+ 30 TURN-ON/TURN-OFF TIME vs. VCOM (SINGLE SUPPLY) MAX312/3/4L toc11 40 TURN-ON/TURN-OFF TIME (ns) MAX312/3/4L toc10 50 TURN-ON/TURN-OFF TIME vs. VCOM (DUAL SUPPLIES) MAX312/3/4L toc12 SUPPLY CURRENT vs. LOGIC INPUT VOLTAGE TURN-ON/TURN-OFF TIME (ns) MAX312L/MAX313L/MAX314L 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches 100 4 8 12 SUPPLY VOLTAGE (V) 16 20 ±3 ±6 ±9 ±12 SUPPLY VOLTAGE (V) _______________________________________________________________________________________ ±15 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches PIN NAME FUNCTION MAX312L MAX313L MAX314L 1, 8, 9, 16 1, 8, 9, 16 1, 8, 9, 16 IN1, IN4, IN3, IN2 2, 7, 10, 15 2, 7, 10, 15 2, 7, 10, 15 COM1, COM4, COM3, COM2 3, 6, 11, 14 — — NC1, NC4, NC3, NC2 Analog Signal Normally Closed Terminals — 3, 6, 11, 14 — NO1, NO4, NO3, NO2 Analog Signal Normally Open Terminals — — 3, 6 NO1, NO4 Analog Signal Normally Open Terminals — — 11, 14 NC3, NC2 Analog Signal Normally Closed Terminals 4 4 4 V- 5 5 5 GND 12 12 12 N.C. 13 13 13 V+ Applications Information Low-Distortion Audio The MAX312L/MAX313L/MAX314L, having very low RON and very low RON variation with signal amplitude, are well suited for low-distortion audio applications. The Typical Operating Characteristics show Total Harmonic Distortion (THD) vs. Frequency graphs for several signal amplitudes and impedances. Higher source and load impedances improve THD, but reduce off-isolation. Off-Isolation at High Frequencies In 50Ω systems, the high-frequency on-response of these parts extends from DC to above 100MHz with a typical loss of -2dB. When the switch is turned off, however, it behaves like a capacitor, and off-isolation decreases with increasing frequency. (Above 300MHz, the switch actually passes more signal turned off than turned on.) This effect is more pronounced with higher source-and-load impedances. Above 5MHz, circuit board layout becomes critical, and it becomes difficult to characterize the response of the switch independent of the circuit. The graphs shown in the Typical Operating Characteristics were taken using a 50Ω source and load connected with BNC connectors. Logic Inputs Analog Signal Common Terminals Negative Analog Supply Input (connect to GND for singlesupply operation) Ground No Connection. Not internally connected. Positive Analog Supply Input Power-Supply Sequencing-Free Operation Most CMOS switches require specific power-supply sequencing in order to prevent the devices from latching up. The older MAX312/MAX313/MAX314 devices require a proper power-supply sequence of V+, VL, V-, and so forth. Otherwise, it becomes necessary to add signal diodes to the circuit in order to protect it from potential latchups. The new MAX312L/MAX313L/ MAX314L devices eliminate the need for a VL pin and permit the user to utilize any power-up sequence that is required. It is, however, important not to exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices. Chip Information TRANSISTOR COUNT: 92 PROCESS: CMOS _______________________________________________________________________________________ 7 MAX312L/MAX313L/MAX314L Pin Description MAX312L/MAX313L/MAX314L 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches Test Circuits/Timing Diagrams V+ VIN_ SWITCH INPUT tr < 20ns tf < 20ns 50% LOGIC INPUT MAX312L MAX313L MAX314L SWITCH OUTPUT V+ COM_ VCOM_ NO_ OR NC_ 0 tOFF LOGIC INPUT VO CL 35pF RL 300Ω IN_ GND V- 0 V- VO 0.9VO SWITCH OUTPUT REPEAT TEST FOR EACH SWITCH. FOR LOAD CONDITIONS, SEE ELECTRICAL CHARACTERISTICS. 0 tON CL INCLUDES FIXTURES AND STRAY CAPACITANCE. VO = VCOM x RL RL + RON LOGIC INPUT WAVEFORMS INVERTED FOR NORMALLY CLOSED SWITCHES. Figure 1. Switching-Time Test Circuit V+ MAX314L VIN_ V+ LOGIC INPUT 50% COM_ NO_ COM_ NC_ V01 0 VCOM1 = +10V VCOM2 = +10V VO1 SWITCH OUTPUT 1 (V01) RL1 V02 0.9V01 RL2 0 IN_ VO2 0.9V02 SWITCH OUTPUT 2 (V02) 0 tD LOGIC INPUT GND V- 0 V- tD CL INCLUDES FIXTURES AND STRAY CAPACITANCE. Figure 2. Break-Before-Make Test Circuit (MAX314L only) 8 _______________________________________________________________________________________ CL2 CL1 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches MAX312L MAX313L MAX314L DV0 V0 V+ OFF RGEN OFF V+ COM_ NC_ OR V0 VIN_ ON VIN_ ON NO_ VGEN CL GND IN_ OFF V- OFF Q = (DV0)(CL) VVIN DEPENDS ON SWITCH CONFIGURATION; INPUT POLARITY DETERMINED BY TRUTH TABLE VIN_ Figure 3. Charge Injection Test Circuit V+ C SIGNAL GENERATOR 0dBm MAX312L MAX313L MAX314L SIGNAL GENERATOR 0dBm 50Ω NO_ COM_ IN_ IN_ IN_ IN_ IN1 ANALYZER MAX312L MAX313L MAX314L V+ COM_ V+ COM_ V+ C IN2 NC_ OR NO_ GND V- RL COM_ C NO_ ANALYZER V- RL GND COM_ V- N.C. C V- Figure 4. Off-Isolation Test Circuit Figure 5. Crosstalk Test Circuit _______________________________________________________________________________________ 9 MAX312L/MAX313L/MAX314L Test Circuits/Timing Diagrams (continued) MAX312L/MAX313L/MAX314L 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches Test Circuits/Timing Diagrams (continued) V+ C MAX312L MAX313L MAX314L V+ C COM_ V+ MAX312L MAX313L MAX314L V+ COM_ CAPACITANCE METER IN_ CAPACITANCE METER f = 1MHz IN_ NC_ OR NO_ GND V- IN_ f = 1MHz IN_ NC_ OR NO_ C GND V- VV- Figure 6. Channel Off-Capacitance Test Circuit Figure 7. Channel On-Capacitance Test Circuit Ordering Information (continued) PART TEMP. RANGE PIN-PACKAGE MAX313LCUE 0°C to +70°C 16 TSSOP MAX313LCSE 0°C to +70°C 16 Narrow SO MAX313LCPE 0°C to +70°C 16 Plastic DIP MAX313LEUE -40°C to +85°C 16 TSSOP MAX313LESE -40°C to +85°C 16 Narrow SO MAX313LEPE -40°C to +85°C 16 Plastic DIP MAX314LCUE 0°C to +70°C 16 TSSOP MAX314LCSE 0°C to +70°C 16 Narrow SO MAX314LCPE 0°C to +70°C 16 Plastic DIP MAX314LEUE -40°C to +85°C 16 TSSOP MAX314LESE -40°C to +85°C 16 Narrow SO MAX314LEPE -40°C to +85°C 16 Plastic DIP 10 ______________________________________________________________________________________ C 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches TSSOP,NO PADS.EPS ______________________________________________________________________________________ 11 MAX312L/MAX313L/MAX314L Package Information 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches SOICN.EPS MAX312L/MAX313L/MAX314L Package Information (continued) 12 ______________________________________________________________________________________ 10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches PDIPN.EPS Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 13 © 2001 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products. MAX312L/MAX313L/MAX314L Package Information (continued)