ETC LDO_55

LDO_55
IP Library: Very Low Power, Adjustable Output Voltage²,
25mA Low Dropout Voltage Regulator
PRODUCT PREVIEW
■ ANALOG BASEBAND REGULATOR
■ HIGH PSRR : 60dB
APPLICATION NOTE
An external capacitor (COUT = 1µF typical) with an
equivalent serial resistance (ESR) in the range
0.02 to 0.6Ω is used to ensure stability.
■ LOW QUIESCENT CURRENT
Figure 1 : Block Diagram
■ VERY LOW DROPOUT VOLTAGE : 60mV
■ 20µA STD-BY MODE CURRENT
■ NO CURRENT IN POWER DOWN MODE
IN
?
PWRDWN
?
STDBY
?
? OUT
■ SHORT CIRCUIT PROTECTION
■ SMALL DECOUPLING CERAMIC CAPACITOR
TYPICAL APPLICATIONS
– Cellular and Cordless phones supplied by 1 cell
Lithium-ion battery / 3 cells Ni-MH or Ni-Cd
battery.
VREF
– PDA (Personal Digital Assistant), Smart phone.
– Portable equipment.
LDO_55
– Supply for Digital (DSP/Microcontroller) devices.
Figure 2 : Typical Application Circuit
IN
VIN
?
?
OUT
VOUT
COUT
Power Down Mode
ON
OFF
PWRDWN
1µF
?
→
→
Stand-by Mode
Stand-by Mode →
→
Active Mode
LDO_55
ESR1
STDBY
?
?
GND
June 2002
This is advance information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
1/2
LDO_55
ELECTRICAL CHARACTERISTICS
3V < VIN < 5.5V, -30°C < T < +125°C, 0.8µF < COUT < 1.2µF, 20mΩ < ESR < 0.6Ω, 100µA < ILOAD < 25mA.
Typical case : VIN = 4V, T = 25°C, IOUT = 12.5mA.
Parameter
Symbol
Input Voltage Range (Note 1)
Output Voltage
VIN
VOUT
Output Voltage Accuracy
Output current
IOUT
PMOS Output Resistance
RON
Dropout Voltage
∆VDO
Quiescent current
IQ
Stand-by mode current
IQSTDBY
Power down mode quiescent current
Power Supply Rejection Ratio
Load Regulation
Line Regulation
Line Transient
Load Transient
IQPRWDWN
PSRR
Ldr
Lir
Lirt
Ldtr
Output decoupling capacitor
Settling time
(from power down to active mode)
COUT
tRISE
tFALL
Short Circuit Current Limit
Test Condition
Min
Typ
3
Adj = 0
Adj = 1
Active mode
Sleep mode
∆VOUT = 50mV,
ILOAD = 25mA
(Note 2)
ILOAD = 100µA,
ILOAD = 25mA
ILOAD = 500µA
VOUT = 3V
Power down active
f < 10KHz
Unit
5,5
V
V
1,8
3
3
25
500
0,6
%
mA
µA
Ω
60
mV
30
60
20
40
80
30
µA
µA
µA
100
50
15
5
1 000
25
10
1
nA
dB
mV
mV
mV
1
mV
1
30
70
µF
µs
60
200
µs
200
250
mA
0,1
5
170
40
ILOAD = 25mA
∆VIN = 300mV
tRISE = tFALL = 10µs
10% to 90%
and 90% to 10%
of 25mA in 10µs
From power down
to active mode
From active mode
to power down
ISHORT
Max
100
Notes: 1. Above characteristics are given for 3V minimum input operating range voltage, but regulator is
operational with 2.7V minimum input voltage.
2. All parameters are guaranteed with 170mV Dropout voltage.
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
© 2002 STMicroelectronics - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco
Singapore - Spain - Sweden - Switzerland - United Kingdom - United States
http://www.st.com
2/2