LOC210 Linear Optocouplers Features • 16 Pin SOIC Package (PCMCIA Compatible) • Couples Analog and Digital Signals • Wide Bandwidth (>200kHz) • High Gain Stability • Low Input/Output Capacitance • Low Power Consumption • 0.01% Servo Linearity • THD 87dB Typical • Machine Insertable, Wave Solderable • Surface Mount and Tape Reel Versions Available • VDE Compatible Description The LOC210 Dual Linear Optocoupler features an infrared LED optically coupled with two phototransistors. One feedback (input) phototransistor is used to generate a control signal that provides a servomechanism to the LED drive current, thus compensating for the LEDs nonlinear time and temperature characteristics. The other (output) phototransistor provides an output signal that is linear with respect to the servo LED current. The product features wide bandwidth, high input to output isolation and excellent servo linearity. Applications • Modem Transformer Replacement With No Insertion Loss • Digital Telephone Isolation • Power Supply Feedback Voltage/Current • Medical Sensor Isolation • Audio Signal Interfacing • Isolation of Process Control Transducers Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7344 • BS EN 41003:1993 Certificate #:7344 Ordering Information Pin Configuration Part # LOC210P LOC210PTR LOC210 Pinout – LED 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 + LED + Vcc I1 NC NC +Vcc I1 Description 16 Pin Flatpack (50/Tube) 16 Pin Flatpack (1000/Reel) NC NC +Vcc I2 K3 Sorted Bins Bin 1 = 0.773 - 0.886 Bin 2 = 0.887 - 1.072 Bin Matrix Suffix K L M N – LED + LED +Vcc Bin Top Pole Bottom Pole Optocoupler* Optocoupler** 1 1 1 2 2 1 2 2 *Top Pole Optocoupler: Pins 1,2,3,4,13, and 14 **Bottom Pole Optocouplers: Pins 7 through 12 I2 Part Number Information The LOC210 are shipped in anti-static tubes (50 pieces each) or tape/reel (1,000 pieces each). Each container has only 1 bin combination which will be branded on each part with the appropriate bin letter K, L, M, or N in the lower right hand corner. Suffix representation is described in the “Bin Matrix”. DS-LOC210-R4.0 www.clare.com 1 LOC210 Absolute Maximum Ratings (@ 25o C) Parameter Min Input Power Dissipation Input Control Current Peak (10ms) Total Package Dissipation Isolation Voltage Input to Output SOIC Package Operational Temperature Storage Temperature Soldering Temperature (10 Seconds Max) Flatpack Package 1 2 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - - 1501 100 1 8002 3750 -40 -40 - - VRMS °C +85 +125 °C +220 °C - - +260 mW mA A mW °C mW/°C Derate Linearly 1.33 Derate Linearly 6.67 mW/°C Electrical Characteristics Parameter Conditions Input Characteristics @ 25°C1 LED Voltage Drop IF=2-10mA Reverse LED Current VR=5V Reverse LED Voltage Forward LED Current Coupler/Detector Characteristics @ 25°C1 Dark Current IF=0mA, VCC=15V K1, Servo Gain (I1/IF) IF=2-10mA, VCC=15V K2, Forward Gain (I2/IF) IF=2-10mA, VCC=15V K3, Transfer Gain (K2/K1) IF=2-10mA, VCC=15V ∆K3, Transfer Gain Linearity IF=2-10mA (non-servoed) K3 Temperature Coefficient IF=2-10mA, Vdet=-5V Common Mode V=20VP-P, RL=2KΩ, Rejection Ratio F=100Hz Total Harmonic Distortion FO=350Hz, 0dBm Frequency Response Photoconductive Operation Photovoltaic Operation Input/Output Capacitance Input/Output Isolation SOIC Package 1 All 2 Symbol Min Typ Max Units VF IR VR IF 0.9 - 1.2 - 1.4 10 5 100 V µA V mA ID K1 K2 K3 ∆K3 0.004 0.004 0.733 - 1 0.007 0.007 - 25 0.030 0.030 1.072 1.0 nA % ∆K3/∆T CMRR - 0.005 130 - %/°C dB THD BW (-3dB) BW (-3dB) CI/O -96 - -87 200 40 3 -80 - dB kHz kHz pF VI/O 3750 - - VRMS parameters above are for each optocoupler. www.clare.com Rev. 4.0 LOC210 PERFORMANCE DATA* LOC210 LED Current (IF) vs. LED Forward Voltage (VF) LOC210 LED Current (IF) vs. LED Forward Voltage (VF) 35 LOC210 Servo Gain vs. LED Current & Temperature 0.014 100 20 15 10 25°C 0.010 10 Servo Gain LED Current (mA) LED Current (mA) 25 1 50°C 70°C 85°C 0.008 0.006 0.004 0.002 5 0 0.1 1.2 1.4 1.3 0 1 1.1 LED Forward Voltage (V) 0°C 100 25°C 50°C 70°C 85°C 60 40 20 0 0 2 4 6 8 LED Current (mA) 0 2 10 12 0°C 25°C 1.0 50°C 0.8 70°C 85°C 0.6 0.4 0.2 0 0 2 4 6 8 LED Current (mA) 6 8 10 12 LOC210 Typical LED Forward Voltage Drop vs. Temperature 1.4 1.2 4 LED Current (mA) LOC210 Normalized Servo-Photocurrent vs. LED Current & Temperature Normalized Servo-Photocurrent 120 80 1.4 1.3 LED Forward Voltage (V) LOC210 Servo-Photocurrent vs. LED Current & Temperature 140 1.2 LED Forward Voltage Drop (V) 1.1 1 Servo-Photocurrent (µA) 0°C 0.012 30 10 12 1.7 1.6 1.5 1.4 20mA 1.3 10mA 1.2 5mA 1.1 1.0 0.9 -40 -15 10 35 60 85 Temperature (°C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 4.0 www.clare.com 3 LOC210 MECHANICAL DATA 16 Pin SOIC (“P” Suffix) 1.981 TYP. (.078) 2.108 MAX. (.083) 1.270 TYP. (.050) 7.493 ± .051 (.295 ± .002) 7.493 ± .127 (.295 ± .005) 1.016 (.040) PC Board Pattern (Top View) 10.160 ± .051 (.400 ± .002) 1.270 (.050) 10.363 ± .127 (.408 ± .005) 9.728 ± .051 (.383 ± .002) .254 (.010) 1.193 (.047) .406 TYP. (.016) 8.890 TYP. (.350) .787 (.031) Tape and Reel Packaging for 16 Pin SOIC Package 330.2 DIA. (13.00) 6.731 MAX. (.265) Top Cover Tape Thickness .102 MAX. (.004) 1.753 ± .102 (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 16 10.693 ± .025 (.421 ± .001) 12.090 (.476) 3.175 (.125) Top Cover Tape Embossed Carrier Embossment 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.897 ± .025 (.429 ± .001) 1.549 ± .102 (.061 ± .004) User Direction of Feed Dimensions mm (inches) 4 www.clare.com Rev. 4.0 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LOC210-R4.0 ©Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 4/8/02