E-Series Plug-In Mixer 2 - 500 MHz EMK-1H V3.00 R-5 Features ● ● LO Power: +17 dBm Up to +14 dBm RF Specifications @ 25°C Frequency Range RF LO IF 2 - 500 MHz 2 - 500 MHz DC - 500 MHz Conversion Loss (dB) 4 - 250 MHz 2 - 500 MHz Typical 6.0 7.0 Maximum 7.5 8.5 Isolation (dB) LO to RF 2 - 20 MHz 20 - 250 MHz 250 - 500 MHz LO to IF 2 - 20 MHz 20 - 250 MHz 250 - 500 MHz Typical Minimum 50 40 30 40 30 25 45 35 25 35 25 20 Operating Characteristics Impedance 50 Ohms Nominal RF input for 1dB Compression + 14 dBm Ordering Information Part No. EMK-1H Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) WEIGHT (APPROX.): 0.13 OUNCES 3.5 GRAMS Packing Tube Pin Configuration Absolute Maximum Ratings Parameter RF Power Peak IF Current Storage Temperature Operating Temperature Pin Temperature (10 Seconds) Absolute Maximum 200 mW 40 mA -55°C to 100°C -55°C to 100°C 260°C Function LO RF IF* Ground Case Ground Pin No. 8 1 3,4 2,5,6,7 2 * IF pins must be connected together externally. S 0041 B Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020