E-Series Surface Mount Mixer 1600 - 2300 MHz EMRS-1800 V3.00 Features ● ● ● SM-24 LO Power +17 dBm Up to +14 dBm RF Surface Mount Specifications @ 25°C Frequency Range RF LO IF 1600 - 2300 MHz 1600 - 2300 MHz 10 - 200 MHz Conversion Loss (dB) 1600 - 2300 MHz Typical 8.5 Maximum 9.5 Isolation (dB) LO to RF 1600 - 2300 MHz LO to IF 1600 - 2300 MHz Typical Minimum 28 25 24 20 Two Tone Third Order Input Intercept (dBm) Typical +23 Test Conditions RF1: 2100 MHz @ 0 dBm RF2: 2101 MHz @ 0 dBm LO: 2055 MHz @ +17 dBm Minimum +20 Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) Operating Characteristics Impedance 50 Ohms Nominal RF input for 1dB Compression +14 dBm Ordering Information Part No. EMRS-1800 EMRS-1800TR Packaging Tubes Forward Tape & Reel Pin Configuration Absolute Maximum Ratings Parameter Absolute Maximum RF Power 200 mW Peak IF Current 40 mA Storage Temperature -55°C to 100°C Operating Temperature -55°C to 100°C Pin Temperature (10 Seconds) 260°C Function LO RF IF Ground Pin No. 1 4 5 2,3,6 S0905 A Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020