JW
VDE
COMPACT PC BOARD
POWER RELAY
FEATURES
28.6
.1.126
• Miniature package with universal
terminal footprint
• High dielectric withstanding for
transient protection:
10,000 V surge in µs between coil
and contact
• Sealed construction
• Class B coil insulation types
available
• TV rated (TV-5) types available
(only for 1 Form A type)
• VDE, TÜV, SEMKO, SEV, FIMKO, TV-5
also approved
12.8
.504
20.0
.787
mm inch
RoHS Directive compatibility information
http://www.nais-e.com/
JW RELAYS
COMMENTS ABOUT Cd
FREE
We have introduced Cadmium free type
products to reduce the material which is
not good for our environment. (The suffix
“F” should be added to the part number.)
(Note: The Suffix “F” is required only for 1
Form A contact type. The 1 Form C and 2
Form A and 2 Form C contact type is
originally Cadmium free, the suffix “F” is
not required.)
If you are still using Cadmium containing
parts, which don’t have “F” on the suffix
of the part number, please use Cadmium
free parts from now on. The life of the
Cadmium free products may be shorter
than the Cadmium containing parts
based on the load condition, so please
evaluate the Cadmium free parts with
your actual application before use.
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Nominal switching
capacity
Max. switching
power
Rating
Max. switching
(resistive
voltage
load)
Max. switching
current
Min. switching
capacity#1
Mechanical
Expected (at 180 cpm)
life (min.
Electrical (at 6 cpm)
ope.)
(Resistive load)
Characteristics
Standard type
High capacity type
1 Form A, 1 Form C,
1 Form A, 1 Form C
2 Form A, 2 Form C
100 mΩ
AgSnO2 type
5 A 250 V AC,
10 A 250 V AC,
5 A 30 V DC
10 A 30 V DC
1,250 VA, 150 W
2,500 VA, 300 W
250 V AC, 30 V DC
5A
10 A
100 mA, 5 V DC
5×106
105
Coil
Nominal operating power
530 mW
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Detection current: 10mA
*2 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*5 Half-wave pulse of sine wave: 6ms
*6 Detection time: 10µs
*7 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT .
*8 When using relays in a high ambient temperature, consider the pick-up voltage
rise due to the high temperature (a rise of approx. 0.4% V for each 1°C 33.8°F
with 20°C 68°F as a reference) and use a coil impressed voltage that is within the
maximum allowable voltage range.
Standard type
High capacity type
Max. operating speed
6 cpm
(at rated load)
Initial insulation resistance
Min. 1,000 MΩ at 500 V DC
Between open
1,000 Vrms for 1 min.
contacts
Initial
Between contacts
5,000 Vrms for 1 min.
breakdown
and coil
1
voltage*
Between contact
3,000 Vrms for 1 min. (2 Form A, 2 Form C)
sets
Initial surge voltage between
Min. 10,000 V
contacts and coil*2
3
Operate time*
Max. 15 ms
(at nominal voltage)
Release time (without diode)*3
Max. 5 ms
(at nominal voltage)
Temperature rise (at 20°C)
1a: max. 39°C
1a: max. 45°C
(at nominal voltage)
1c, 2a, 2c: max. 55°C
1c: max. 55°C
(with nominal coil voltage and
(resistance method) (resistance method)
at nominal switching capacity)
Min. 98 m/s2 {10 G}
Functional*4
Shock
resistance Destructive*5
Min. 980 m/s2 {100 G}
Approx. 98 m/s2 {10 G}, 10 to 55 Hz
Functional*6
at double amplitude of 1.6 mm
Vibration
resistance
Approx. 117.6 m/s2 {12 G}, 10 to 55 Hz at
Destructive
double amplitude of 2.0 mm
Conditions for operation, Ambient
–40°C to +85°C –40°F to +185°F
transport and storage*7 temp.*8
(Not freezing and
condensing at low
Humidity
5 to 85% R.H.
temperature)
Unit weight
Approx. 13 g .46 oz
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
JW
TYPICAL APPLICATIONS
3. Industrial equipment
NC machines, Robots, Temperature
controllers
1. Home appliances
TV sets, VCR, Microwave ovens
2. Office machines
Photocopiers, Vending machines
ORDERING INFORMATION
Ex. JW
1
Contact
arrangement
Contact capacity
1: 1 Form C
1a: 1 Form A
2: 2 Form C
2a: 2 Form A
Nil: Standard
(5 A)
F: High capacity
(10 A)*
F
S
N
B
DC5V
Protective
construction
Pick-up
voltage
Coil insulation
class
S: Sealed type
N: 70% of
nominal
voltage
Nil: Class E
insulation
B: Class B
insulation
Coil voltage
Contact material
DC 5, 6, 9, 12,
18, 24, 48 V
• AgSnO2 type
F: 1a (Standard/High capacity)
Nil: 1c (Standard/High capacity),
2a (Standard), 2c (Standard)
*Only for 1 Form A and 1 Form C type
UL/CSA, VDE, SEMKO, FIMKO, SEV approved type is standard.
Notes: 1. When ordering TV rated (TV-5) types, add suffix-TV (available only for 1 Form A type).
2. Standard packing: Carton: 100 pcs. Case: 500 pcs.
3. Please inquire about the previous products (Cadmium containing parts).
TYPES
Standard (5A) types
Contact arrangement
1 Form A
1 Form C
Coil voltage, V DC
5
6
9
12
18
24
48
5
6
9
12
18
24
48
Part No.
JW1aSN-DC5V-F
JW1aSN-DC6V-F
JW1aSN-DC9V-F
JW1aSN-DC12V-F
JW1aSN-DC18V-F
JW1aSN-DC24V-F
JW1aSN-DC48V-F
JW1SN-DC5V
JW1SN-DC6V
JW1SN-DC9V
JW1SN-DC12V
JW1SN-DC18V
JW1SN-DC24V
JW1SN-DC48V
Contact arrangement
Part No.
JW1aFSN-DC5V-F
JW1aFSN-DC6V-F
JW1aFSN-DC9V-F
JW1aFSN-DC12V-F
JW1aFSN-DC18V-F
JW1aFSN-DC24V-F
JW1aFSN-DC48V-F
Contact arrangement
2 Form A
2 Form C
Coil voltage, V DC
5
6
9
12
18
24
48
5
6
9
12
18
24
48
Part No.
JW2aSN-DC5V
JW2aSN-DC6V
JW2aSN-DC9V
JW2aSN-DC12V
JW2aSN-DC18V
JW2aSN-DC24V
JW2aSN-DC48V
JW2SN-DC5V
JW2SN-DC6V
JW2SN-DC9V
JW2SN-DC12V
JW2SN-DC18V
JW2SN-DC24V
JW2SN-DC48V
Coil voltage, V DC
5
6
9
12
18
24
48
Part No.
JW1FSN-DC5V
JW1FSN-DC6V
JW1FSN-DC9V
JW1FSN-DC12V
JW1FSN-DC18V
JW1FSN-DC24V
JW1FSN-DC48V
High capacity (10 A) types
Contact arrangement
1 Form A
Coil voltage, V DC
5
6
9
12
18
24
48
1 Form C
COIL DATA (at 20°C 68°F)
Nominal voltage,
V DC
5
6
9
12
18
24
48
Pick-up voltage,
V DC (max.)
(Initial)
3.5
4.2
6.3
8.4
12.6
16.8
33.6
Drop-out voltage,
V DC (min.)
(Initial)
0.5
0.6
0.9
1.2
1.8
2.4
4.8
Nominal operating
current, mA
(±10%)
106
88
58
44
29
22
11
Coil resistance,
W
(±10%)
47
68
155
270
611
1,100
4,400
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Nominal operating
power, mW
Max. allowable
voltage
130% V of
Nominal Voltage
(at 60°C 140°F)
530
120% V of
Nominal Voltage
(at 85°C 185°F)
JW
DIMENSIONS
mm inch
1 Form A
0.4
.016
20
.787
3.5
.138
2.4
.094
0.5 3.6
.020 .142
0.3
.012
1.1
.043
12.8
.504
7.6
.299
0.4
.016
7.6
.299
4-1.3 dia.
4-.051 dia.
Relay outline
Wiring diagram (Bottom view)
N.O.
3.5
.138
28.6
1.126
20
.787
0.3
.012
Tolerance: ±0.1 ±.004
2.4
.094
PC board pattern
(Copper-side view)
20
.787
12.8
.504
0.3
.012
1 Form C
PC board pattern
(Copper-side view)
COM
2.4
.094
20
.787
2.4
.094
3.5 3.5
.138 .138
16.5
.650
5-1.3 dia.
5-.051 dia.
7.6
.299
3.6
0.5
.020 .142
0.3
.012
0.5
.020
Relay outline
Tolerance: ±0.1 ±.004
1.1
.043
Wiring diagram (Bottom view)
3.5
.138
3.5
.138
28.6
1.128 16.5
.650
N.O.
COM
N.C.
Stand-off
COIL
COIL
0.8
.031
0.9
.035
Dimension :
Max. 1mm .039 inch
1 to 3mm .039 to .118 inch
Min. 3mm .118 inch
2 Form A
0.3
.012
0.3
.012
1.3
.051
2 Form C
PC board pattern
(Copper-side view)
0.4
.016
0.5
.020
20
.787
1.3
.051
5
.197
7.6
.299
12.8
.504
General tolerance
±0.1 ±.004
±0.2 ±.008
±0.3 ±.012
20
.787
PC board pattern
(Copper-side view)
0.4
.016
6-1.3 dia.
6-.051 dia.
7.5
.295
3.6
.142
Tolerance: ±0.1 ±.004
1.1
.043
Wiring diagram (Bottom view)
5
.197
1.3
.051
5
5
.197 .197
COM
28.6
1.128 20
.787
6-1.3 dia.
6-.051 dia.
7.5
.295
Relay outline
Tolerance: ±0.1 ±.004
Wiring diagram (Bottom view)
5
.197
5
.197
28.6
1.128
15
.591
N.O.
N.O.
COM
N.C.
COIL
COIL
0.8
.031
7.5
.299
12.8
.504
15
.591
0.5 3.6
.020 .142
0.3
.012
0.5
.020
0.3
.012
1.1
1.3
.043
.051
Relay outline
20
.787
0.8
.031
Dimension :
Max. 1mm .039 inch
1 to 3mm .039 to .118 inch
Min. 3mm .118 inch
7.5
.295
12.8
.504
General tolerance
±0.1 ±.004
±0.2 ±.008
±0.3 ±.012
REFERENCE DATA
1-(1). Maximum operating power
1-(2). Maximum operating power
1-(3). Maximum operating power
1 Form A Standard (5 A) type
1 Form A High Capacity (10 A) type
1 Form C Standard (5 A) type
10
1
DC resistive AC resistive
load
load
10
100
Contact voltage, V
10
1
1,000
Contact current, A
100
Contact current, A
Contact current, A
100
DC resistive AC resistive
load
load
10
100
AC resistive load (cosϕ = 1.0)
10
1
1,000
0
Contact voltage, V
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
10
100
Contact voltage, V
1,000
JW
2 Form C Standard (5 A) type
AC resistive load (cosϕ = 1.0)
10
Contact current, A
1-(6). Maximum operating power
2 Form A Standard (5 A) type
Contact current, A
1-(5). Maximum operating power
1 Form C High Capacity (10 A) type
Contact current, A
1-(4). Maximum operating power
AC resistive load (cosϕ = 1.0)
10
1
1
0
10
100
1
0
1,000
AC resistive load (cosϕ = 1.0)
10
10
100
0
1,000
10
100
Contact voltage, V
Contact voltage, V
1,000
Contact voltage, V
2-(1). Life curve
2-(2). Life curve
3-(1). Operate/release time
1 Form A Standard (5 A) type
1 Form A High Capacity (10 A) type
Sample: JW1aSN-DC12V-F, 10 pcs.
Ambient temperature: 20°C 68°F
100
Operate/release time, ms
10
250 V AC resistive load (cosϕ =1.0)
30 V DC resistive load
Life, ×104
Life, ×104
100
10
250 V AC resistive load (cosϕ =1.0)
30 V DC resistive load
10
Operate time
Max.
xMin.
5
Release time
5
10
5
15
Contact current, A
10
0
15
80
90
100
Max.
xMin.
110
3-(2). Operate/release time
3-(3). Operate/release time
3-(4). Operate/release time
Sample: JW1aFSN-DC12V, 10 pcs.
Ambient temperature: 20°C 68°F
Sample: JW1SN-DC12V-F, 6 pcs.
Ambient temperature: 20°C 68°F
Sample: JW2aSN-DC24V-F, 6 pcs.
Ambient temperature: 20°C 68°F
14
Max.
xMin.
5
Release time
Max.
xMin.
11
10
9
8
7
6
Max.
xMin.
Max.
x-x
Min.
5
4
3
2
0
80
90
100
110
1
120
80
Sample: JW2SN-DC12V-F, 6 pcs.
Ambient temperature: 20°C 68°F
120
6
Max.
xMin.
5
4
Release time
3
Max.
xMin.
2
1
80
90
100
110
120
130
Coil applied voltage, %V
Release time
80
130
90
100
110
60°C
85°C
50
40
30
70
40
30
10
10
120
140
160
Coil applied voltage, %V
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
60°C
85°C
50
20
100
25°C
60
20
0
120
Coil applied voltage, %V
25°C
60
Max.
xMin.
2
Sample: JW1aFSN-DC12V-F, 6 pcs.
Point measured: Inside the coil
Temperature rise, °C
Operate time
6
Sample JW1aFSN-DC12V-F, 6 pcs.
Point measured: Inside the coil
70
7
Max.
xMin.
8
4-(2). Coil temperature rise
(Contact carrying current: 10 A)
8
Operate/release time, ms
110
Operate time
10
4-(1). Coil temperature rise
(Contact carrying current: 5A)
9
0
100
12
Coil applied voltage, %V
Coil applied voltage, %V
3-(5). Operate/release time
90
13
4
Temperature rise, °C
Operate time
Operate/release time, ms
13
12
Operate/release time, ms
Operate/release time, ms
10
120
Coil applied voltage, %V
Contact current, A
0
100
120
140
Coil applied voltage, %V
160
JW
ACCESSORIES
FEATURES
1. Space saving design
2. Wiring can be done with ease (DIN terminal)
For 1 poles
DIN terminal
Socket
For 2 poles
N.C. contact raw
N.C. contact raw
N.O. contact raw
N.O. contact raw
COM contact raw
COM contact raw
Coil terminal raw
Coil terminal raw
TYPES
Product name
Number of
poles
Part No.
1
JW1-SFD
2
JW2-SFD
1
2
1
2
JW1-PS
JW2-PS
JW1-SS
JW2-SS
JW1 DIN terminal socket
(with hold-down clip)
JW2 DIN terminal socket
(with hold-down clip)
JW1 PC board socket
JW2 PC board socket
JW1 Plug-in socket
JW2 Plug-in socket
Applicable relay type
1 Form C
2 Form A
1 Form A
•
2 Form C
Standard packing
Inner carton
Outer case
•
•
•
•
•
•
•
10 pcs.
•
•
•
•
100 pcs.
SPECIFICATIONS
PC board socket/Plug-in socket
1 pole
2 poles
1,500 vrms for 1 minute
Min. 100 MΩ
Type
Item
Breakdown voltage
Insulation resistance
DIMENSIONS
1. DIN terminal socket
mm inch
2. PC board socket
1 Form A
1 Form C
0.8±0.1
.031±.004
5-1.3 dia.
5-.051 dia.
13±0.6
.512±.024
67±1
2.638±.039
6.5 dia.
.256 dia.
6.5
.256
32±0.6
1.260±.024
1
8
3
6
4.3±0.3
.169±.012
3.5
.138
3.5 dia.
.138 dia.
(4.4)
(.173)
21.5±0.6
.846±.024
16.5
.650 3.5
.138
3.5
.138
2 Form A
2 Form C
6.7±0.3
.264±.012
4±0.6
.157±.024
Pre-soldering
5
7
4
2
3±0.3
.118±.012
7.6
.299
35.4±0.5
1.394±.020
15±0.3
.591±.012
5±0.3
.197±.012
PC board pattern (Bottom view)
20.6±0.6
.811±.024
7.5±0.2
.295±.008
5±0.3
.197±.012
DIN terminal socket
1 pole
2 poles
1,500 Vrms for 1 minute
1,000 Vrms for 1 minute
Min. 100 MΩ
0.3±0.1
.012±.004
0.35±0.1
.014±.004
21±0.6
.827±.024
28.5±0.6
1.122±.024
8-1.3 dia.
8-.051 dia.
7.5
.295
(4)
(.157)
15
5 5
.591 .197 .197
Tolerance: ±0.1 ±.004
3. Plug-in socket
Panel cut-out
(Thickness: 1.0 to 2.0 .039 to .079)
13±0.6
.512±.024
37±0.6
1.457±.024
36.4±0.6
1.433±.024
25.4±0.6
1.000±.024
34.9
1.374
1±0.3
.039±.012
11.9
.469
Tolerance: ±0.1 ±.004
2±0.3
.079±.012
2±0.3
.079±.012
8.6±0.3
.339±.012
8±0.6
.315±.024
1.9±0.3
.075±.012
Details of
terminal portion
For Cautions for Use, see Relay Technical Information.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.