ST21Y068 Smartcard MCU with 68 KBytes High Density EEPROM Data Brief Feature summary ST21Y068 major applications include: ■ Mobile communications (GSM and CDMA) ■ Java applications Hardware features 259a.ai ■ Enhanced 8/16-bit CPU core with 16 MBytes linear addressable memory ■ 248 Kbytes User ROM Security features ■ 6 Kbytes User RAM ■ Monitoring of environmental parameters ■ 68 Kbytes User EEPROM including 64 Bytes User OTP area: – Highly reliable CMOS EEPROM submicron technology – 10-year data retention – 500,000 Erase/Write cycles endurance typical at 25°C – 1 to 64 Bytes Erase or Program in 1.5 ms ■ Protection against faults ■ ISO 3309 CRC calculation block ■ Cryptographic performances(1): – Triple DES (with keys loaded): 9.3 µs – Single DES (with keys loaded): 3.1 µs ■ True Random Number Generator Micromodule Wafer ■ Unique serial number on each die ■ Asynchronous Receiver Transmitter supporting ISO 7816-3 T=0 and T=1 protocols ■ Hardware DES accelerator ■ Two 8-bit timers with interrupt capability Development environment ■ 1.8V, 3V and 5V supply voltage ranges ■ External clock frequency from 1 up to 7.5 MHz ■ High performance provided by: – CPU clock frequency up to 22 MHz – External clock multiplier (2x, 3x, and 4x) Software development and firmware generation are supported by a comprehensive set of development tools dedicated to software design and validation. ■ Current consumption complies with GSM specifications ■ Power-saving Standby mode ■ Contact assignment compatible ISO 7816-2 ■ ESD protection greater than 4 kV (HBM) 1. Typical values at 22 MHz March 2007 Rev 6 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com 1 Description 1 ST21Y068 Description The ST21Y068 product is a serial access microcontroller specially designed for costeffective secure mobile applications. It is based on an enhanced STMicroelectronics 8/16-bit CPU core offering 16 MBytes linear addressing space. It is manufactured using an advanced highly reliable ST CMOS EEPROM technology. The device includes a DES accelerator. A serial interface fully compatible with the ISO 7816-3 standard (T = 0 and T = 1) for Smartcard applications is available. A CRC calculation block is also available and is directly accessible by the User. The product architecture is optimized for low power consumption applications. A flexible clock generator module provides increased performance for specific current requirements. Figure 1. Block diagram RAM EEPROM DES Accelerator ROM Internal Bus CRC Module Clock Generator Module CLK 2x 8-bit timers Security Administrator True Random Number Generator 8/16-bit CPU Core IART RESET Vcc GND I/O 579 2/4 ST21Y068 1.1 Revision history Development environment Development tools for smartcard products include a complete range of hardware systems and software tools from STMicroelectronics and third-party tool suppliers. The range of tools includes solutions to help you to develop and debug your application and evaluate smartcard products and their peripherals. An Integrated Development Environment (IDE), the STMicroelectronics Visual Debug (STVD), provides a set of tools for developing embedded applications. This interface manages the project configuration, code edition, code generation and program debugging. An emulator (SCICS) and a simulator are available for developing and validating your application code. All the information needed to generate the application code and personalization will be collected in a delivery file (.DLV extension). This file is created using the Delivery menu of the STMicroelectronics configuration software tool, SCOOL. 2 Revision history Table 1. Document revision history Date Revision Changes 13-Dec-2005 1 Initial release. 06-Feb-2006 2 Product name confirmed. 16-Mar-2006 3 CPU frequency updated. 3-Oct-2006 4 Updated Features summary 27-Oct-2006 5 Updated Features summary 20-Mar-2007 6 Updated Erase/Write cycles endurance value and Section 1.1: Development environment on page 3. 3/4 ST21Y068 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved BULL CP8 Patents STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 4/4