MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ZAV ZAV SERIES 105°C Ultra Low Impedance. ♦FEATURES • Extremely reduced impedance at high frequency range. • Reflow soldering is available. • Load Life : 105°C 1000 hours. ♦SPECIFICATIONS Items Characteristics Category Temperature Range -40~+105°C Rated Voltage Range 6.3~35V.DC Capacitance Tolerance ±20%(20°C,120Hz) I=0.01CV or 3µA whichever is greater. Leakage Current(MAX) I=Leakage Current(µA) Rated Voltage (V) tanδ Dissipation Factor(MAX) 6.3 10 (After 2 minutes application of rated voltage) C=Rated Capacitance(µF) 16 25 35 V=Rated Voltage(V) (20°C,120Hz) 0.15 0.13 0.12 0.10 0.10 After applying rated voltage with rated ripple current for 1000 hrs at 105°C, the capacitors shall meet the following requirements. Endurance Low Temperature Stability Impedance Ratio(MAX) Capacitance Change Within ±20% of the initial value. Dissipation Factor Not more than 200% of the specified value. Leakage Current Not more than the specified value. Rated Voltage (V) Z(-40°C)/Z(20°C) 6.3 10 16 25 35 3 3 3 3 3 (120Hz) ♦MULTIPLIER FOR RIPPLE CURRENT Frequency coefficient Frequency 10k 100k< = (Hz) 4.7~10µF 120 1k 0.15 0.40 0.75 1.00 15~33µF 0.20 0.50 0.80 1.00 47~100µF 0.25 0.60 0.90 1.00 120~220µF 0.35 0.70 0.92 1.00 330~470µF 0.45 0.75 0.95 1.00 Coefficient ♦PART NUMBER ZAV Rated Voltage Series DxL Rated Capacitance Capacitance Tolerance Option Case Size MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ZAV ♦DIMENSIONS (mm) L+ α MAX C P B1±0.2 φD+0.5MAX C A1±0.2 SLEEVE 0.3MAX W1 φD L A1 B1 C W1 P α 4 7 4.3 4.3 2.0 0.5~0.8 0.8 0.3 5 7 5.3 5.3 2.2 0.5~0.8 1.3 0.3 6.3 7 6.6 6.6 2.7 0.5~0.8 1.8 0.3 8 12 8.3 8.3 2.9 0.8~1.1 3.1 0.5 0.5MAX ♦STANDARD SIZE Rated voltage (V.DC) Rated capacitance (µF) Size φDXL(mm) Rated ripple current (mA r.m.s./105°C, 100kHz) Impedance (ΩMAX/20°C, 100kHz) 22 4X7 150 0.68 47 5X7 230 0.36 100 6.3X7 310 0.20 6.3(0J) 470 8X12 930 0.053 15 4X7 150 0.70 33 5X7 230 0.36 56 6.3X7 310 0.21 10(1A) 330 8X12 930 0.054 10 4X7 150 0.72 22 5X7 230 0.38 47 6.3X7 310 0.21 8X12 930 0.055 4X7 150 0.79 15 5X7 230 0.39 27 6.3X7 310 0.22 8X12 930 0.057 4.7 4X7 150 0.85 8.2 5X7 230 0.46 6.3X7 310 0.25 930 0.058 16(1C) 180 6.8 25(1E) 120 35(1V) 18 82 8X12