oH VE S CO AV R M AI SIO PL LA N IA BL S NT E *R Features ■ ■ ■ ■ ■ Applications Lead free versions available RoHS compliant (lead free version)* Bidirectional EMI filtering ESD protection > 25 k volts Protects 4 data lines ■ ■ ■ ■ Cell phones PDAs and notebooks Digital cameras MP3 players and GPS 2FAF-C10R - Integrated Passive & Active Device General Information The 2FAF-C10R device, manufactured using Thin Film on Silicon technology, provides ESD protection and EMI filtering for the data ports of portable electronic devices such as cell phones, modems and PDAs. The device incorporates four low pass filter channels where each channel has a series 100 ohm resistor assuring a minimum of –28 dB attenuation from 800 MHz to 3 GHz. The device is suitable for EMI filtering of GSM, CDMA, W-CDMA, WLAN and Bluetooth frequencies. Each internal and external port of the four channels includes a TVS diode for ESD protection. The ESD protection provided by the component enables a data port to withstand a minimum ±8 KV Contact / ±15 KV Air Discharge per the ESD test method specified in IEC 61000-4-2. The device measures 1.33 mm x 2 mm and is available in a 10 bump CSP package intended to be mounted directly onto an FR4 printed circuit board. The CSP device meets typical thermal cycle and bend test specifications without the use of an underfill material. SOLDER BUMPS SILICON DIE Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Per Line Specification Symbol Min. Nom. Max. Unit Resistance R 80 100 120 — Capacitance @ 2.5 V, 1 MHz C 24 30 36 pF Rated Standoff Voltage VWM Breakdown Voltage @ 1 mA VBR Forward Voltage @ 10 mA VF 0.8 Leakage Current @ 3.3 V IR 0.05 Filter Attenuation @ 800-3000 MHz S21 ESD Protection: IEC 61000-4-2 Contact Discharge Air Discharge Power Dissipation per Resistor 5.0 V 6.0 -28 V V 0.1 -35 µA dB ±8 ±15 kV kV PD 100 mW Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Operating Temperature Range Storage Temperature Range Symbol Min. Nom. Max. Unit TJ -40 +25 +85 °C TSTG -55 +25 +150 °C *RoHS Directive 2002/95/EC Jan 27 2003, including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 2FAF-C10R - Integrated Passive & Active Device Mechanical Characteristics This is a silicon-based device and is packaged using chip scale packaging technology. Solder bumps, formed on the silicon die, provide the interconnect medium from die to PCB. The bumps are arranged on the die in a regular grid formation. The grid pitch is 0.5 mm and the dimensions for the packaged device are shown below. 0.3 DIA. (0.012) 0.245 - 0.255 (0.0096 - 0.0100) A1 C1 B2 A3 C3 1.981 - 2.032 (0.0780 - 0.0800) 0.495 - 0.505 (0.0195 - 0.0199) 0.432 - 0.559 (0.017 - 0.022) C4 A4 B5 0.180 - 0.280 (0.0071 - 0.0110) 0.330 - 0.457 (0.013 - 0.018) 1.285 - 1.375 (0.0506 - 0.0541) A6 C6 0.180 - 0.280 (0.0071 - 0.0110) DIMENSIONS = 0.430 - 0.440 (0.0169 - 0.0173) MILLIMETERS (INCHES) 0.430 - 0.440 (0.0169 - 0.0173) 1.285 - 1.375 (0.0506 - 0.0541) Reliability Data Reliability data is gathered on an ongoing basis for Bourns® Integrated Passive and Active Devices. “Package level” testing of the integrity of the solder joint is carried out on an independent Daisy-Chain test device. A 25-Pin Daisy Chain component is available from Bourns for this purpose (part number 2TAD-C25R). This is a 5 x 5 array featuring 0.5 mm pitch solder bumps. The Distance to Neutral Point (DNP) on that component is larger than that of the 2FAF-C10R and is thus deemed suitable for Thermal Cycle testing. “Silicon level” reliability performance is based on similarity to other integrated passive CSP devices from Bourns. Frequency Response 0 Loss - dB -10 -20 -30 -40 -50 -60 0.1 1.0 10.0 100.0 1000.0 1000.0 Frequency - MHz Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 2FAF-C10R - Integrated Passive & Active Device Block Diagram PCB Design and SMT Processing The CSP device block diagram below includes the pin names and basic electrical connections associated with each channel. EXT1 R1: 100 ohms Please consult the “Bourns Design Guide Using CSP” for notes on PCB design and SMT Processing. INT1 How to Order 2 FAF - C10R __ GND Thinfilm Model Chipscale EXT2 INT2 Packaging Option R = Tape and Reel Packaged 5000 pcs. / 7 ˝ reel R2: 100 ohms EXT3 R3: 100 ohms INT3 GND EXT4 INT4 R4: 100 ohms Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. No. of Solder Bumps Terminations LF = Sn/Ag/Cu (lead free) __ = Sn/Pb 2FAF-C10R - Integrated Passive & Active Device Device Pin Out The Pin-Out for the device is shown below. Note also that the device is shown with bottom side solder pads facing up. A B C 1 EXT1 INT1 2 EXT2 INT2 3 4 EXT3 Function EXT1 EXT2 EXT3 EXT4 GND Pin Out C1 C3 C4 C6 B5 Function INT1 INT2 INT3 INT4 GND INT3 5 EXT4 Pin Out A1 A3 A4 A6 B2 GND GND INT4 6 Packaging The surface mount product is packaged in an 8 mm x 4 mm Tape and Reel format per EIA-481 standard. TOP SIDE VIEW (INTO COMPONENT POCKET) DIMENSIONS = 0.3 ± 0.05 (.01 ± .002) 1.5 ± 0.1/-0 (.06 ± .004/-0) DIA. 2.0 ± 0.05 (.08 ± .002) R MILLIMETERS (INCHES) 4.0 ± 0.1 (.16 ± .004) 1.75 ± 0.1 (.07 ± .004) 0.3 MAX. (0.01) 0.76 ± 0.1 (.03 ± .004) 8.0 ± 0.3 (.31 ± .01) 1.52 ± 0.1 (.06 ± .004) 3.50 ± 0.05 (.14 ± .002) 1.18 ± 0.1 (0.05 ± 0.004) 4.0 ± 0.1 (.16 ± .004) ORIENTATION OF COMPONENT IN POCKET R 0.25 TYP. (0.010) BACKSIDE FACING UP Reliable Electronic Solutions Asia-Pacific: TEL +886- (0)2 25624117 • FAX +886- (0)2 25624116 Europe: TEL +41-41 768 5555 • FAX +41-41 768 5510 The Americas: TEL +1-951 781-5492 • FAX +1-951 781-5700 www.bourns.com COPYRIGHT© 2005, BOURNS, INC. LITHO IN U.S.A. 08/04 e/IPA0411 2FAF-C10R REV. B, 03/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.