Revised January 2005 NC7WP02 TinyLogic ULP Dual 2-Input NOR Gate General Description Features The NC7WP02 is a dual 2-Input NOR Gate from Fairchild’s Ultra Low Power (ULP) series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC. ■ Space saving US8 package The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7WP02 is designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining extremely low CMOS power dissipation. ■ Ultra small MicroPak Pb-Free package ■ 0.9V to 3.6V VCC supply operation ■ 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to 3.6V ■ tPD 3 ns typ for 3.0V to 3.6V VCC 4 ns typ for 2.3V to 2.7V VCC 5 ns typ for 1.65V to 1.95V VCC 6 ns typ for 1.40V to 1.60V VCC 9 ns typ for 1.10V to 1.30V VCC 24 ns typ for 0.90V VCC ■ Power-Off high impedance inputs and outputs ■ Static Drive (IOH/IOL) ±2.6 mA @ 3.00V VCC ±2.1 mA @ 2.30V VCC ±1.5 mA @ 1.65V VCC ±1.0 mA @ 1.40V VCC ±0.5 mA @ 1.10V VCC ±20 µA @ 0.9V VCC ■ Low noise switching using design techniques of Quiet Series noise/EMI reduction circuitry ■ Ultra low dynamic power Ordering Code: Product Order Number Package Code Number Top Mark NC7WP02K8X MAB08A WP02 NC7WP02L8X MAC08A Y4 Package Description Supplied As 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel Pb-Free 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Battery Life vs. VCC Supply Voltage TinyLogic ULP and ULP-A with up to 50% less power consumption can extend your battery life significantly. Battery Life = (Vbattery *Ibattery*.9)/(Pdevice)/24hrs/day Where, Pdevice = (ICC * VCC) + (CPD + C L) * VCC2 * f Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at 10MHz, with CL = 15 pF load TinyLogic is a registered trademark, and Quiet Series and MicroPak are trademarks of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS500811 www.fairchildsemi.com NC7WP02 TinyLogic ULP Dual 2-Input NOR Gate October 2003 NC7WP02 Logic Symbol Connection Diagrams IEEE/IEC Pin Assignments for US8 Pin Descriptions (Top View) Pin Names Description An , Bn Input Yn Output Pin One Orientation Diagram Function Table Y=A+B Inputs Output A B Y L L H L H L H L L H H L AAA represents Product Code Top Mark - see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak H = HIGH Logic Level L = LOW Logic Level (Top Through View) www.fairchildsemi.com 2 Supply Voltage (VCC) −0.5V to +4.6V DC Input Voltage (VIN) −0.5V to +4.6V Recommended Operating Conditions (Note 3) Supply Voltage DC Output Voltage (VOUT) 0.9V to 3.6V Input Voltage (VIN) −0.5V to VCC +0.5V HIGH or LOW State (Note 2) VCC = 0V −0.5V to 4.6V DC Input Diode Current (IIK) VIN < 0V 0V to 3.6V Output Voltage (VOUT) ±50 mA DC Output Diode Current (IOK) HIGH or LOW State 0V to VCC VCC = 0V 0V to 3.6V Output Current in IOH/IOL VOUT > 0V −50 mA VCC = 3.0V to 3.6V ±2.6 mA VOUT < VCC +50 mA VCC = 2.3V to 2.7V ±2.1 mA ± 50 mA VCC = 1.65V to 1.95V ±1.5 mA VCC = 1.40V to 1.60V ±1.0 mA VCC = 1.10V to 1.30V ±0.5 mA DC Output Source/Sink Current (IOH/IOL) DC VCC or Ground Current per ± 50 mA Supply Pin (ICC or Ground) −65°C to +150 °C Storage Temperature Range (TSTG) VCC = 0.9V ±20 µA Free Air Operating Temperature (TA) −40°C to +85°C Minimum Input Edge Rate (∆t/∆V) VIN = 0.8V to 2.0V, VCC = 3.0V 10 ns/V Note 1: Absolute Maximum Ratings: are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: IO Absolute Maximum Rating must be observed. Note 3: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage VIL LOW Level Input Voltage VCC TA = +25°C (V) Min 0.90 Max HIGH Level Output Voltage Min 0.65 x VCC 0.65 x VCC 1.10 ≤ VCC ≤ 1.30 0.65 x VCC 0.65 x VCC 1.40 ≤ VCC ≤ 1.60 0.65 x VCC 0.65 x VCC 1.65 ≤ VCC ≤ 1.95 0.65 x VCC 0.65 x VCC 2.30 ≤ VCC ≤ 2.70 1.6 3.00 ≤ VCC ≤ 3.60 2.1 Units Conditions Max V 1.6 2.1 0.90 0.35 x VCC 0.35 x VCC 1.10 ≤ VCC ≤ 1.30 0.35 x VCC 0.35 x VCC 1.40 ≤ VCC ≤ 1.60 0.35 x VCC 0.35 x VCC 1.65 ≤ VCC ≤ 1.95 0.35 x VCC 0.35 x VCC 2.30 ≤ VCC ≤ 2.70 0.7 0.7 3.00 ≤ VCC ≤ 3.60 VOH TA = −40°C to +85°C 0.9 V 0.9 0.90 VCC − 0.1 VCC − 0.1 1.10 ≤ VCC ≤ 1.30 VCC − 0.1 VCC − 0.1 1.40 ≤ VCC ≤ 1.60 VCC − 0.1 VCC − 0.1 1.65 ≤ VCC ≤ 1.95 VCC − 0.1 VCC − 0.1 2.30 ≤ VCC ≤ 2.70 VCC − 0.1 VCC − 0.1 3.00 ≤ VCC ≤ 3.60 VCC − 0.1 VCC − 0.1 1.10 ≤ VCC ≤ 1.30 0.75 x VCC 0.70 x VCC IOH = −0.5 mA IOH = −20 µA V 1.40 ≤ VCC ≤ 1.60 1.07 0.99 IOH = −1.0 mA 1.65 ≤ VCC ≤ 1.95 1.24 1.22 IOH = −1.5 mA 2.30 ≤ VCC ≤ 2.70 1.95 1.87 IOH = −2.1 mA 3.00 ≤ VCC ≤ 3.60 2.61 2.55 IOH = −2.6 mA 3 www.fairchildsemi.com NC7WP02 Absolute Maximum Ratings(Note 1) NC7WP02 DC Electrical Characteristics Symbol TA = +25°C VCC Parameter (V) VOL LOW Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current (Continued) Min Max TA = −40°C to +85°C Min Units Conditions Max 0.90 0.1 0.1 1.10 ≤ VCC ≤ 1.30 0.1 0.1 1.40 ≤ VCC ≤ 1.60 0.1 0.1 1.65 ≤ VCC ≤ 1.95 0.1 0.1 2.30 ≤ VCC ≤ 2.70 0.1 0.1 IOL = 20 µA 3.00 ≤ VCC ≤ 3.60 0.1 0.1 1.10 ≤ VCC ≤ 1.30 0.30 x VCC 0.30 x VCC IOL = 0.5 mA 1.40 ≤ VCC ≤ 1.60 0.31 0.37 IOL = 1.0 mA 1.65 ≤ VCC ≤ 1.95 0.31 0.35 IOL = 1.5 mA 2.30 ≤ VCC ≤ 2.70 0.31 0.33 IOL = 2.1 mA 3.00 ≤ VCC ≤ 3.60 0.31 0.33 0.90 to 3.60 ±0.1 ±0.5 µA 0 ≤ VI ≤ 3.6V 0 0.5 0.5 µA 0 ≤ (VI, VO) ≤ 3.6V 0.90 to 3.60 0.9 0.9 µA VI = VCC or GND V IOL = 2.6 mA AC Electrical Characteristics Symbol tPHL Parameter Propagation Delay tPLH tPHL Propagation Delay tPLH tPHL Propagation Delay tPLH TA = +25°C VCC (V) Min 0.90 Typ TA = −40°C to +85°C Max Min Max Units 4.0 9.0 20.7 3.5 30.9 1.40 ≤ VCC ≤ 1.60 2.0 6.0 12.4 1.5 13.9 1.65 ≤ VCC ≤ 1.95 1.5 5.0 9.6 1.0 12.1 2.30 ≤ VCC ≤ 2.70 1.0 4.0 7.0 0.8 8.0 3.00 ≤ VCC ≤ 3.60 1.0 3.0 5.7 0.5 6.9 0.90 ns CL = 10 pF RL = 1 MΩ Figures 1, 2 27.0 1.10 ≤ VCC ≤ 1.30 5.0 10.0 22.2 4.5 33.9 1.40 ≤ VCC ≤ 1.60 3.0 7.0 13.3 2.5 16.0 1.65 ≤ VCC ≤ 1.95 2.0 5.0 10.3 2.0 12.6 2.30 ≤ VCC ≤ 2.70 1.5 4.0 7.4 1.0 8.2 3.00 ≤ VCC ≤ 3.60 1.0 3.0 6.1 0.5 7.0 0.90 ns CL = 15 pF RL = 1 MΩ Figures 1, 2 34.0 1.10 ≤ VCC ≤ 1.30 6.0 12.0 26.0 5.0 43.0 1.40 ≤ VCC ≤ 1.60 4.0 8.0 16.0 3.0 18.0 1.65 ≤ VCC ≤ 1.95 2.0 6.0 12.0 2.0 14.0 2.30 ≤ VCC ≤ 2.70 1.0 5.0 9.0 1.0 10.0 3.00 ≤ VCC ≤ 3.60 0.8 4.0 7.0 0.5 8.9 ns Input Capacitance 0 2.0 pF COUT Output Capacitance 0 4.0 pF CPD Power Dissipation 0.9 to 3.60 6.0 pF www.fairchildsemi.com Figure Number 24.0 1.10 ≤ VCC ≤ 1.30 CIN Capacitance Conditions 4 CL = 30 pF RL = 1 MΩ VI = 0V or VCC, f = 10 MHz Figures 1, 2 NC7WP02 AC Loading and Waveforms FIGURE 1. AC Test Circuit FIGURE 2. AC Waveforms Symbol VCC 3.3V ± 0.3V 2.5V ± 0.2V 1.8V ± 0.15V 1.5V ± 0.10V 1.2V ± 0.10V 0.9V Vmi 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 Vmo 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 5 www.fairchildsemi.com NC7WP02 Tape and Reel Specification TAPE FORMAT for US8 Package Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator K8X Cover Tape Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Cover Tape TAPE DIMENSIONS inches (millimeters) TAPE FORMAT for MicroPak Package Designator L8X Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) www.fairchildsemi.com 6 NC7WP02 Tape and Reel Specification (Continued) REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) 7 www.fairchildsemi.com NC7WP02 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package Number MAB08A www.fairchildsemi.com 8 NC7WP02 TinyLogic ULP Dual 2-Input NOR Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 8-Lead MicroPak, 1.6 mm Wide Package Number MAC08A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 9 www.fairchildsemi.com