A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. AXIAL LED LAMPS Infrared Axial LED Lamps Part Number: AL-XIR61-880 Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is U 5sec when 260℃. If temperature is higher, time should be shorter (+10℃Æ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM MATERIALS Resin (mold) Epoxy Lens color Water Clear Printed circuit board BT Dice GaAlAs Emitted color Infrared NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 2006/9/28 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. AXIAL LED LAMPS Part Number: AL-XIR61-880 ELECTRO-OPTICAL CHARACTERISTICS Test Parameter Condition Symbol Viewing angle at 50% IV Forward Voltage IF=10mA (Typ.) (Max.) Rise/Fall time (PW=10uS DC=1%) Radiant Power IF=20mA IFP=20mA (Min.) 2θ1/2 (TA=25℃) Value Unit 35 Deg 1.4 VF 2.0 500 Tr Tf 200 1.98 V ns IF=20mA PO Wavelength IF=20mA λp 880 nm Spectral Line Half-Width IF=20mA △λ 50 nm IFP 500 mA (Typ.) Peak pulsing current (1/10 duty f=1kHz) 4.00 Absolute maximum ratings Parameter mW/sr (TA=25℃) Symbol Value Unit Forward Current IF 50 mA Reverse Voltage VR 5 V Reverse Current IR 50 µA Power Dissipation PD 100 mW Operating temperature range Top -25 ~+80 ℃ Storage temperature range Tstg -30 ~+85 ℃ Soldering temperature 235℃ within 10 Seconds 2006/9/28 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. AXIAL LED LAMPS Part Number: AL-XIR61-880 Test items and results of reliability ＊Refer to reliability test standard specification for in this line. 2006/9/28 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. AXIAL LED LAMPS Part Number: AL-XIR61-880 Typical Optical-Electrical Characteristic Curves 2006/9/28 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. AXIAL LED LAMPS Part Number: AL-XIR61-880 Typical Optical-Electrical Characteristic Curves 2006/9/28