Platinum DRAGON® Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant LR W5SN, LA W5SN, LY W5SN Vorläufige Daten / Preliminary Data Besondere Merkmale • Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Silikon - Verguss • Typischer Lichtfluss: 75 lm (rot), 89 lm (amber), 61 lm (gelb) bei 1000 mA • Besonderheit des Bauteils: Punktlichtquelle mit hoher Lichtausbeute bei geringem Platzbedarf • Wellenlänge: 625 nm (rot), 617 nm (amber), 590 nm (gelb) • Abstrahlwinkel: Lambertscher Strahler (120°) • Technologie: Dünnfilm InGaAlP • optischer Wirkungsgrad: 60 lm/W (rot), 74 lm/W (amber), 44 lm/W (gelb) bei 100 mA • Gruppierungsparameter: Lichtstrom, Wellenlänge • Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet • Lötmethode: IR Reflow Löten • Vorbehandlung: nach JEDEC Level 2 • Gurtung: 24-mm Gurt mit 800/Rolle, ø180 mm • ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D Features • package: white SMD package, colorless clear silicone resin • typical Luminous Flux: 75 lm (red), 89 lm (amber), 61 lm (yellow) at 1000 mA • feature of the device: point lightsource with high luminous efficiency and low space • wavelength: 625 nm (red), 617 nm (amber), 590 nm (yellow) • viewing angle: Lambertian Emitter (120°) • technology: Thinfilm InGaAlP • optical efficiency: 60 lm/W (red), 74 lm/W (amber), 44 lm/W (yellow) at 100 mA • grouping parameter: luminous flux, wavelength • assembly methods: suitable for all SMT assembly methods • soldering methods: IR reflow soldering • preconditioning: acc. to JEDEC Level 2 • taping: 24-mm tape with 800/reel, ø180 mm • ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D Applications Anwendungen • • • • • • • • • • • • traffic signaling backlighting (illuminated advertising, general lighting) • Interior and exterior automotive lighting e.g. dashboard backlighting, rear combination lamp (RCL) • substitution of micro incandescent lamps • portable light souce (e. g. bicycle) • decorative and entertainment lighting (incl. fiber optic illumination) • signal and symbol luminaire for orientation • marker lights (e.g. steps, exit ways, etc.) • indoor and outdoor commercial and residential architectural lighting • LCD backlighting Verkehrssignale Hinterleuchtung (Werbebeleuchtung, Allgemeinbeleuchtung) Innen- und Außenbeleuchtung im Automobilbereich, z. B. Instrumentenbeleuchtung, Heckleuchte Ersatz von Kleinst-Glühlampen Tragbare Beleuchtung z. B. am Fahrrad Dekorative Lichtleiter-Anwendungen Signal- und Symbolleuchten zur Orientierung Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.ä.) Fassadenbeleuchtung im Innen- und Außenbereich Hinterleuchtung für LC-Displays 2007-08-16 1 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Bestellinformation Ordering Indormation Emissionsfarbe Color of Emission Lichtstrom1) Seite 17 Lichtstärke2) Seite 17 Bestellnummer Luminous Flux1) page 17 IF = 700 mA ΦV (mlm) Luminous Intensity2) page 17 IF = 700 mA IV (mcd) Ordering Code LA W5SN-JZKZ-24 amber 61.000 ... 112.000 28.800 (typ.) Q65110A6010 LR W5SN-JYKY-1 red 52.000 ... 97.000 24.800 (typ.) Q65110A6011 LY W5SN-JXKX-35 LY W5SN-JYKY-46 yellow 45.000 ... 82.000 52.000 ... 97.000 21.200 (typ.) 24.800 (typ.) Q65110A5711 Q65110A5712 Typ Type Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LA W5SN-JZKZ-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen JZ, KX, KY oder KZ enthalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlängengruppe geliefert. Z.B.: LA W5SN-JZKZ24 bedeutet, dass auf dem Gurt nur eine der Wellenlängengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 für nähere Information). Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LA W5SN-JZKZ-24 means that only one group JZ, KX, KY or KZ will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA W5SN-JZKZ-24 means that only 1 wavelength group -2, -3, or -4 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). Vergleichstabelle Correlation Table Typ Type Lichtstrom1) Seite 17 Luminous Flux1) page 17 IF = 700 mA ΦV (mlm) Typischer Lichtstrom2) Seite 17 Typical Luminous Flux2) page 17 IF = 1000 mA ΦV (mlm) LA W5SN-JZKZ-24 61.000 ... 112.000 111.600 LR W5SN-JYKY-1 52.000 ... 97.000 96.100 LY W5SN-JXKX-35 LY W5SN-JYKY-46 45.000 ... 82.000 52.000 ... 97.000 81.900 96.100 2007-08-16 2 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Grenzwerte Maximum Ratings (TA=25°C) Bezeichnung Parameter Symbol Symbol Betriebstemperatur Operating temperature range Top – 40 … + 125 °C Lagertemperatur Storage temperature range Tstg – 40 … + 125 °C Sperrschichttemperatur Junction temperature Tj + 135 °C IF (min.) IF 1000 100 mA mA mA Durchlassstrom Forward current (TA=25°C) Werte Values Einheit Unit Stoßstrom Surge current t ≤ 10 μs, D = 0.1; TA=25°C IFM 2500 Sperrspannung Reverse voltage (TA=25°C) VR not designed for reverse operation V Leistungsaufnahme Power consumption (TA=25°C) Ptot 3.4 W Wärmewiderstand Thermal resistance Sperrschicht/Lötpad4) Seite 17 Junction/soldering point4) page 17 2007-08-16 Rth JS 3 9 K/W Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Kennwerte Characteristics (TA = 25 °C) Bezeichnung Parameter Wellenlänge des emittierten Lichtes Wavelength at peak emission IF = 700 mA Dominantwellenlänge5) Seite 17 Dominant wavelength5) page 17 IF = 700 mA Symbol Symbol Werte Values Einheit Unit red amber yellow (typ.) λpeak 632 624 597 nm (min.) (typ.) (max.) λdom λdom λdom 620 625 632 612 617* 624 583 590* 595 nm nm nm Spektrale Bandbreite bei 50 % Φrel max Spectral bandwidth at 50 % Φrel max IF = 700 mA (typ.) Δλ 18 18 18 nm Abstrahlwinkel bei 50 % ΙV (Vollwinkel) Viewing angle at 50 % ΙV (typ.) 2ϕ 120 120 120 Grad deg. Durchlassspannung6) Seite 17 Forward voltage6) page 17 IF = 700 mA (min.) (typ.) (max.) VF VF VF 2.1 2.5 3.3 2.1 2.5 3.3 2.1 2.5 3.3 V V V Sperrstrom Reverse current IR (max.) IR not designed for reverse operation Temperaturkoeffizient von λpeak Temperature coefficient of λpeak IF = 700 mA; –10°C ≤ T ≤ 100°C (typ.) TCλpeak 0.14 0.14 0.12 nm/K Temperaturkoeffizient von λdom Temperature coefficient of λdom IF = 700 mA; –10°C ≤ T ≤ 100°C (typ.) TCλdom 0.08 0.08 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 700 mA; –10°C ≤ T ≤ 100°C (typ.) TCV – 2.5 – 2.5 – 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 700 mA (typ.) ηopt 38 47 21 lm/W (typ.) ηopt max. 60 74 44 lm/W max. Optischer Wirkungsgrad max. Optical efficiency IF = 100 mA * Einzelgruppen siehe Seite 5 Individual groups on page 5 2007-08-16 4 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Wellenlängengruppen (Dominantwellenlänge)5) Seite 17 Wavelength Groups (Dominant Wavelength)5) page 17) Gruppe Group gelb yellow amber amber min. Einheit Unit min. max. max. 2 612 616 3 616 620 583 586 nm 4 620 624 586 589 nm 5 589 592 nm 6 592 595 nm nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstrom1) Seite 17 Luminous Flux1) page 17 ΦV (mlm) Lichtstärke2) Seite 17 Luminous Intensity2) page 17 IV (mcd) JX JY JZ KX KY KZ 45.000 … 52.000 52.000 … 61.000 61.000 … 71.000 71.000 … 82.000 82.000 … 97.000 97.000 …112.000 ) 16.200 (typ.) 18.800 (typ.) 22.000 (typ.) 25.500 (typ.) 30.000 (typ.) 34.800 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 4 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: JY-3 Example: JY-3 Helligkeitsgruppe Brightness Group Wellenlänge Wavelength JY 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppen für jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2007-08-16 5 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Relative spektrale Emission2) Seite 17 Relative Spectral Emission2) page 17 V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve Φrel = f (λ); TA = 25 °C; IF = 700 mA OHL11701 100 % Φrel 80 Vλ 60 yellow amber red 40 20 0 400 450 500 550 600 650 700 nm λ Abstrahlcharakteristik2) Seite 17 Radiation Characteristic2) page 17 Ιrel = f (ϕ); TA=25°C 40˚ 30˚ 20˚ 10˚ 0˚ ϕ 50˚ OHL01660 1.0 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 0 90˚ 100˚ 1.0 2007-08-16 0.8 0.6 0.4 0˚ 20˚ 6 40˚ 60˚ 80˚ 100˚ 120˚ Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Durchlassstrom2) Seite 17 Forward Current2) page 17 IF = f (VF); TA = 25 °C Relativer Lichtfluss2)7) Seite 17 Relative Luminous Flux2) 7) page 17 ΦV/ΦV(700 mA) = f (IF); TA = 25 °C OHL02681 2000 mA IF 10 ΦV OHL12619 10 1 Φ V (700 mA) 3 5 10 0 10 2 5 5 10 1 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 10 -1 1 10 V 3.3 5 10 2 VF IF 2) Seite 17 2) Seite 17 Relative Spannung Relative Voltage2) page 17 ΔVF = VF - VF(25 °C)= f (Tj); IF = 700 mA Relativer Lichtstrom Relative Luminous Flux2) page 17 ΦV/ΦV(25 °C)= f (Tj); IF = 700 mA OHL02985 0.30 V mA 10 3 ΦV ΔVF OHL12880 2.5 Φ V (25 ˚C) 2.0 0.20 yellow 0.15 1.5 0.10 amber red 1.0 0.05 0 0.5 -0.05 -0.10 -60 -40 -20 0 20 40 60 0 -60 -40 -20 0 ˚C 100 Tj 2007-08-16 20 40 60 ˚C 100 Tj 7 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Dominante Wellenlänge2) Seite 16 Dominant Wavelength2) page 16 LR, λdom = f (IF); TA = 25 °C Dominante Wellenlänge2) Seite 16 Dominant Wavelength2) page 16 LA, λdom = f (IF); TA = 25 °C OHL02618 627.5 nm λ dom λ dom 626.5 618.5 626 618 625.5 617.5 625 617 624.5 616.5 624 616 623.5 615.5 0 400 800 1200 mA 1600 Dominante Wellenlänge2) Seite 16 Dominant Wavelength2) page 16 LY, λdom = f (IF); TA = 25 °C OHL02911 591.5 nm λ dom 590.5 590.0 589.5 589.0 588.5 2007-08-16 0 200 400 600 800 0 400 800 1200 mA 1600 IF IF 588.0 OHL02617 619.5 nm mA 1200 IF 8 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Dominante Wellenlänge2) Seite 16 Dominant Wavelength2) page 16 LR, λdom = f (Tj); IF = 700 mA Dominante Wellenlänge2) Seite 16 Dominant Wavelength2) page 16 LA, λdom = f (Tj); IF = 700 mA OHL02680 630 nm λ dom λ dom 628 620 626 618 624 616 622 614 620 612 618 -60 -40 -20 0 20 40 60 610 -60 -40 -20 0 ˚C 100 Tj Dominante Wellenlänge2) Seite 16 Dominant Wavelength2) page 16 LY, λdom = f (Tj); IF = 700 mA OHL02879 598 nm λ dom 596 594 592 590 588 586 584 -60 -40 -20 0 2007-08-16 OHL02679 622 nm 20 40 60 ˚C 100 Tj 9 20 40 60 ˚C 100 Tj Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I F = f ( TS ) Exemplarische durchschnittliche Lebensdauerfür mittlere Helligkeitsgruppe2) Seite 17 Exemplary median Lifetime2) page 17 for median Brightness Group OHL02947 1100 mA IF 900 800 700 600 500 400 300 200 100 0 20 40 60 80 100 ˚C 140 T Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 25 °C 2007-08-16 Einheit IF = 500 mA TS = 25°C 50.000 Betriebsstunden operating hours IF = 1000 mA TS = 85°C 30.000 Betriebsstunden operating hours IF = 750 mA TS = 125°C TJ = 150°C 1.000 Betriebsstunden operating hours IF = 750 mA TS = 150°C TJ = 175°C 100 Betriebsstunden operating hours Unit *The emitter die exhibits excellent performance but slight package discoloration occurs at highest temperatures. Do not use current below 100 mA 0 Bedingungen mittlere Lebensdauer Conditions median Lifetime Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 85 °C 10 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Maßzeichnung8) Seite 17 Package Outlines8) page 17 0...0.1 (0.004) 0.29 (0.011) 0.24 (0.009) 6.2 (0.244) Protection Diode (R0.85 (0.033)) Cathode 1.9 (0.075) C 0.45 (0.018) 1.1 (0.043) 1.7 (0.067) 0.9 (0.035) 2.0 (0.079) 6.8 (0.268) ø0.81 (0.031) ø0.73 (0.028) 0.65 (0.026) 7.2 (0.283) Heat sink 0.8 (0.031) (ø4.2 (0.165)) A 5.35 (0.210) 5.25 (0.206) 4.25 (0.167) 4.15 (0.163) 11.2 (0.441) 10.8 (0.425) 1.2 (0.047) 5.8 (0.228) 1.6 (0.063) GPLY6147 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: Markierung mark 0.2 g Gurtung / Polarität und Lage8) Seite 17 Verpackungseinheit 800/Rolle, ø180 mm 8) page 17 Method of Taping / Polarity and Orientation Packing unit 800/reel, ø180 mm 6.35 (0.250) 7.35 (0.289) 0.3 (0.012) 24 (0.945) 2 (0.079) 0.3 (0.012) 12.4 (0.488) 1.55 (0.061) 11.5 (0.453) 4 (0.157) 1.75 (0.069) Cathode/Collector Side 1.9 (0.075) 8 (0.315) OHAY0508 2007-08-16 11 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Empfohlenes Lötpaddesign8) Seite 17 Recommended Solder Pad8) page 17 Achtung: Anode und Heatsink sind elektrisch verbunden 3 Lötstellen 3 solder points Thermisch optimiertes PCB Thermal enhanced PCB 11.6 (0.457) 1.6 (0.063) 2.3 (0.091) Attention: Anode and Heatsink are electrically connected IR-Reflow Löten IR Reflow Soldering Footprint ø4.0 (0.157) Heatsink attach 12.0 (0.472) 11.6 (0.457) 10 (0.394) 0.3 (0.012) Recommended Solder Pad Design 2.3 (0.091) Empfohlene Padgeometrie ø4.0 (0.157) ø2.5 (0.098) Lötstopplack Solder resist Kupfer Copper 1.6 (0.063) Lötpasten Schablone Solder paste stencil Bare Copper Freies Kupfer 2007-08-16 OHPY2844 12 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Lötbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil für bleifreies Löten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile ˚C 255 ˚C 240 ˚C T 250 ˚C 260 ˚C +0 -5 ˚C 245 ˚C ±5 ˚C ˚C 235 ˚C +5 -0 ˚C 217 ˚C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 ˚C 0 0 50 100 150 200 250 t Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning 2007-08-16 13 s 300 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: Bar Code (1T) LOT NO: Lot Number RoHS Compliant ML Temp ST 2 260 C RT m pl (6P) BATCH NO: Batch Number e Semiconductors (9D) D/C: Date Code Sa Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel Additional TEXT R077 DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 ±0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 24 + 0.3 – 0.1 4 ± 0.1 8 ± 0.1 2 ± 0.1 1.5 + 0.1 1.75 ± 0.1 11.5 ± 0.1 (0.157 ± 0.004) (0.315 ± 0.004) (0.079 ± 0.004) (0.059 + 0.004) (0.069 ± 0.004) (0.453 ± 0.004) Reel dimensions in mm (inch) A 180 (7) 2007-08-16 W Nmin W1 W2 max 24 (0.945) 60 (2.362) 24.4 + 2 (0.961 + 0.079) 30.4 (1.197) 14 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag ˚C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co ˚C 72 nd Ho urs 5 ba E CO te 48 ˚C su ss e Ho co ± is UR ce 24 6 da e y MI 40 be tim h ˚C e ThISTSE l pro < tor tim or ). 23 tim e at t wilnt˚C or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk g rd -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag ˚C ati rar ck rel 30 _ < inf pa % of to ak 90 urs d ). < ns (pe or d Ho urs de , cte itio Ho urs an bje ing co ˚C 72 nd Ho urs 5 te 48 ˚C su ss e Ho co ± ce 24 6 da y 40 be tim e e ˚C h l pro < tor tim or e ). wit 23 tim at t wilnt or l fac ˚C Flo tim s at or ca ale at re. Flo d or el nth tha nti Flo uiv du 4 if: rea es l Flo lab mo ide 5 ce eq low g, ve l vic 5a is be or de 24 tin en pro 6 Le ve l de , e te co , g: un wh Le ve l ke r se da ure ba ed low Le ve mo % ba e ba al d Le ist ure en ref e e 10 tim se for ist ure ale op se for > Mo , se 3 ist ure is or . , se is ha Mo nk be ist nk g rd -03 Mo in Flo r-p RH g, bla Mo ba Ca TD po If bla hin % kin life s (if ar s p. wit 10 ba tor t. J-S thi, va elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE dy 1. e 4 ref 8 red reqy is 2. bo Mo /JE tim e e dit2b 16 req : a) Sto es tim or mi is e ed or g e IPC tim vic b) or Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e 1 l Flo If al ref tim ve l 2 2a 4. se d 3 Le ve l g an Le ve l Ba te ure Le ve Le ist ure Da ist ure Mo ist ure Mo ist Mo Mo N VE RS IO insITI TO T ntaNSUC U g coSEND Ais baURMIECO CThIST SE : MY DE R1 8 P1+ Q -1 P: OU GR ) (G 01 44 C: D/ ) (9D 00 : 20 TY )Q (Q 25 014 110 (X ) PR OD NO : (1T ) LO T NO (6P ) : 12 BA TC O 8 2199 2100 3G H1 23 4 Se S m RA ic M on du O ct pto or H NO s M ul LS ti Y TO T6 PL 76 Muster ED Bin Bin 1: Bin 2: P3: Q- 1-2 ML 1-2 0 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R RT PA 77 al CK TE VA XT R: MO TO OP DE MY 8 -1 Q 1+ P- ul LS ti Y TO T6 PL 76 M R1 GR OU P: 44 D/C : 01 (9D ) 00 (Q )Q TY : 20 A on M du O ct pto or s R 4 ic S NO : 23 H1 BA TC H 25 014 110 O SR AM (X) PR OD NO : (1T ) LO T (6P ) m 998 3G O 021 NO : 12 Se 210 (G ) Muster ED Bin Bin 1: Bin 2: P-1 3: Q- -20 ML 1-2 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R RT PA 77 al CK TE VA XT R: Barcode label Packing Sealing label OHA02044 2007-08-16 15 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Revision History: 2007-08-16 Previous Version: 2007-08-08 Page Subjects (changes since last revision) Date of change all datasheet complemented with yellow 2006-03-15 1, 13 OS-IN-2007-018 (Introduction of Jedec Level 2) 2007-08-16 Anm.: Gemäß IEC 60825-1 (EN 60825-1) gilt: Note: According IEC 60825-1 (EN 60825-1): LED RADIATION LED STRAHLUNG DO NOT VIEW DIRECTLY NICHT DIREKT MIT OPTISCHEN WITH OPTICAL INSTRUMENTS INSTRUMENTEN BETRACHTEN CLASS 1M LED PRODUCT LED KLASSE 1M OHW12884 OHW02884 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 17 may only be used in life-support devices or systems10) page 17 with the express written approval of OSRAM OS. 2007-08-16 16 Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN Fußnoten: 1) Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische technische oder abgeleitete Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen oder abgeleiteten Werten unterscheiden können. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 3) 4) Für weitere Informationen siehe Applikationsschrift im Internet (www.osram-os.com). 5) Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,05 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhältnis im Gleichstrom-Betrieb max. 5:1. 8) Maße werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. 10) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1.) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of ± 11%. Due to the special conditions of the manufacturing processes of LED, the typical or calculated data of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical or calculated data of the typical characeristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) For further information please find the application note on our web site (www.osram-os.com). Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.05 V. 4) 5) 6) 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 8) Dimensions are specified as follows: mm (inch) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. 2007-08-16 2) 17 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.