BIW Connector Systems Electric Vehicle A pollo EV power connectors, series 200 and 450, are designed for fast charge of battery powered electric vehicles. Connectors are intended to be used with microprocessor controlled off-board charging systems, which supply charging current to vehicle battery packs up to 450 A. Connectors are suitable for outdoor use and are field proven to withstand severe handling. Applications: • Electric Vehicle Fast Charging • High Current Connection For more information: www.ittcannon.com/cat195 Product Features • PowerGlide contact design, ensures low insertion forces and excellent electrical performance. • Molded designs provide superb strain relief and ensure best available protection against the ingress of fluids. • Optional LED lights. • Optional control switches. Performance Specifications Mechanical Crushing Load –40°C to 40°C (–40°F to 104°F) 105°C (221°F) max. 10,000 mating cycles 40 lbs. max. 5 each 1 – Last Make, First Break 2 each 1 – Last Make, First Break 35 A continuous 450 A continuous; 600 A for 15 minutes (450 Series) 200 A continuous; 300 A for 15 minutes (200 Series) 2000 lbs. min. BIW Connector Systems Ambient Operating Temperature Conductor Temperature Connector Durability Connector Engagement Force Contact, Control Contact, Pilot Contact, Power Contact, Ground Current Rating, Control Contact Current Rating, Power Contact Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs Dimensions are shown in mm (inch) Dimensions subject to change Version 05.01.03 B-01 www.ittcannon.com