U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Features Package Product features 1608 (h=0.4mm) Type, Milky White resin ・Outer Dimension 1.6 x 0.8 x 0.4mm ( L x W x H ) ・Temperature range Storage Temperature : -40℃～100℃ Operating Temperature : -40℃～ 85℃ ・Lead–free soldering compatible ・RoHS compliant Dominant wavelength Blue Green Spatial distribution θx = 133 deg., θy =144 deg. Die materials InGaN Rank grouping parameter Sorted by luminous intensity and wavelength per rank taping Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering and manual soldering Taping and reel 4,000pcs per reel in a 8mm width tape. (Standard) Reel diameter: φ180mm ESD 1kV (HBM) : 470nm(UB) : 527nm(UG) Recommended Applications Cellular Phone only 2007.8.31 Page 1 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Color and Luminous Intensity Part No. Material Emitted Color UB1114C-0005 InGaN Blue UG1114C-0005 InGaN Green Lens Color Milky White (Ta=25℃) Dominant Wavelength Luminous Intensity λd (nm) Iv (mcd) TYP. IF MIN. TYP. IF 470 5 6 16 5 527 5 16 40 5 ※Note : The luminous intensity(Iv) and dominant wavelength (λd) above are the setup values of the sorting machine. (Tolerance : IV…±10%, λd ...±3nm) 2006.11.29 Page 2 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Absolute Maximum Ratings (Ta=25℃) Absolute Maximum Ratings Item Symbol Power Dissipation Forward Current Unit UB UG Pd 70 76 mW IF 20 20 mA IFRM 48 48 mA ⊿IF 0.28 0.28 mA/℃ ⊿IFRM 0.69 0.69 mA/℃ Reverse Voltage VR 5 5 V Operating Temperature T opr -40～+85 ℃ Storage Temperature Tstg -40～+100 ℃ Pulse Forward Current ※1 Derating (Ta=25℃ or higher) ※1 IFRMMeasurement condition : Pulse Width≦1ms., Duty≦1/20. 2006.11.29 Page 3 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Electro-Optical Characteristics Item Forward Voltage Conditions IF=5mA (Ta=25℃) Characteristics Symbol UB UG TYP. 2.9 2.9 MAX. 3.2 3.3 VF Unit V Reverse Current VR =5V IR MAX. 100 100 μA Peak Wavelength IF=5mA λp TYP. 466 522 nm IF=5mA λd TYP. 470 527 nm IF=5mA ⊿λ TYP. 30 35 nm IF=5mA 2θ1/2 TYP. Dominant Wavelength Spectral Line Half Width 133(θx) 133(θx) Half Intensity Angle deg. 144(θy) 144(θy) ※Note: The dominant wavelength (λd) above is the setup value of the sorting machine. （Tolerance: λd …±3nm） 2006.11.29 Page 4 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Luminous Intensity Rank (Ta=25℃) Intensity Tolerance each Rank : +/- 10% IV（mcd） Rank A B C D E UB IF=5mA MIN. MAX. 6 10 10 16 16 25 25 40 40 - UG IF=5mA MIN. MAX. 16 25 25 40 40 64 64 100 100 - ※ Please contact our sales staff concerning rank designation. 2006.11.29 Page 5 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Color Tone Groups (λd) (Ta=25℃) Tolerance: +/- 3nm Dominant Wavelength λd (nm) Rank 1 2 3 UB IF=5mA MIN. MAX. 465 470 470 475 UG IF=5mA MIN. MAX. 515 527 527 540 ※ Please contact our sales staff concerning rank designation. 2006.11.29 Page 6 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Technical Data(UB) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 5mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Forward Voltage VF(V) 2006.11.29 Condition : Ta = 25℃ Relative Intensity Forward Current IF(mA) Condition : Ta = 25℃ Forward Current IF(mA) Page 7 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Technical Data(UB) Derating Ambient Temperature vs. Relative Intensity Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Power Dissipation vs. Ambient Temperature Pulse Width vs. Maximum Tolerable Peak Current IF peak Max./IF DC MAX. Power Dissipation : Pd (mW) Condition : Ta = 25℃ Ambient Temperature : Ta(℃) 2006.11.29 Pulse Width : tw (μs) Page 8 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Technical Data(UB) Duty(%) 2006.11.29 Ambient Temperature vs. Forward Voltage Forward Voltage VF(V) Maximum Forward Current : IF MAX. (mA) Duty Cycle vs. Maximum Forward Current Ambient Temperature : Ta(℃) Page 9 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Technical Data(UG) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 5mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Forward Voltage VF(V) 2006.11.29 Condition : Ta = 25℃ Relative Intensity Forward Current IF(mA) Condition : Ta = 25℃ Forward Current IF(mA) Page 10 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Technical Data(UG) Derating Ambient Temperature vs. Relative Intensity Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Power Dissipation vs. Ambient Temperature Pulse Width vs. Maximum Tolerable Peak Current IF peak Max./IF DC MAX. Power Dissipation : Pd (mW) Condition : Ta = 25℃ Ambient Temperature : Ta(℃) 2006.11.29 Pulse Width : tw (μs) Page 11 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Technical Data(UG) Duty(%) 2006.11.29 Ambient Temperature vs. Forward Voltage Forward Voltage VF(V) Maximum Forward Current : IF MAX. (mA) Duty Cycle vs. Maximum Forward Current Ambient Temperature : Ta(℃) Page 12 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Package Dimensions (Unit: mm) Weight: (1.32)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity : 4,000pcs/ reel (standard) 2007.10.12 Page 13 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6 maximum) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2007.8.31 350 3 s 1 time (MAX.) (MAX.) (MAX.) Page 14 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Handling These types are designed chiefly for Cellular phone application, and are setting the thickness of the Product to about 0.4-0.5 mm thinly.To achieve the tin type of the product, making each material thin is aimed at. Because they are inferior to our general LEDs by an external stress, please use these product types after paying attention to the following. 1)Please set the mounting load to Max. 2N. 2)Please do not increase more quantity of the soldering paste than necessary quantity (The thickness of stencil Mask : about 100-120μ), because the terminal area of the product is small. 3)Please avoid the collision of the mounting board etc. after LEDs were mounted on the substrate. 4)When warp of substrate is large after these were mounted on FPC etc, please use these product types after affirming these is no problem. 5)Please use these product types after affirming there is no problem about the mounting position etc. of product from substrate edge, when mounting them on multi-layer and multi-piece PCBs. 2006.11.29 Page 15 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life EIAJ ED4701/100(101) Resistance to Soldering Heat EIAJ ED4701/300(301) Temperature Cycling EIAJ ED4701/100(105) Wet High Temp. Storage Life High Temp. Storage Life EIAJ ED4701/100(103) EIAJ ED4701/200(201) Low Temp. Storage Life Vibration, Variable Frequency Testing Conditions Duration Ta = 25℃, IF = Maxium Rated Current Failure 1,000 h 0/25 Twice 0/25 5 cycles 0/25 Ta = 60±2℃, RH = 90±5% 1,000 h 0/25 Ta = Maximum Rated Storage Temperature 1,000 h 0/25 EIAJ ED4701/200(202) Ta = Minimum Rated Storage Temperature 1,000 h 0/25 EIAJ ED4701/400(403) 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction 2h 0/10 Pre-heating : 150～180℃ 120s Max. Operation Heating : 230℃ 40s Max. Peak Temperature : 260℃ Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) 2 Failure Criteria Items Symbols Luminous Intensity Iv Forward Voltage VF Reverse Current IR Cosmetic Appearance - 2007.8.31 Conditions IF Value of each product Luminous Intensity IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V - Failure criteria Testing Min. Value ＜ Spec. Min. Value x 0.5 Testing Max. Value ≧ Spec. Max. Value x 1.2 Testing Max. Value ≧ Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking Page 16 U□1114C-0005 Series Single Color 1608 (h=0.4 mm) Type Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page 17