DC/DC Converters TMR 3 Series, 3 Watt RoHS Features ◆ Wide 2:1 Input Voltage Range ◆ Ultra-compact SIP-8 Package ◆ Small Footprint ◆ Full SMD Design ◆ Temperature Range –40° to +70°C ◆ High Efficiency ◆ Excellent Load and Line Regulation ◆ Indefinite Short-circuit Protection ◆ I/O-Isolation 1500 VDC ◆ Remote On/Off Control ◆ Fully RoHS compliant ◆ 3 Year Product Warranty compliant The TMR-3 series is a new family of isolated 3W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. The product comes in a ultra-compact SIP-8 plastic package with a small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. An excellent efficiency allows –40° to +70°C operation temperatures at full load. Further features include remote On/Off control and continuous short circuit protection. The very compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and industrial electronics. Models Order code TMR 3-0510 TMR 3-0511 TMR 3-0512 TMR 3-0513 TMR 3-0521 TMR 3-0522 TMR 3-0523 TMR 3-1210 TMR 3-1211 TMR 3-1212 TMR 3-1213 TMR 3-1221 TMR 3-1222 TMR 3-1223 TMR 3-2410 TMR 3-2411 TMR 3-2412 TMR 3-2413 TMR 3-2421 TMR 3-2422 TMR 3-2423 TMR 3-4810 TMR 3-4811 TMR 3-4812 TMR 3-4813 TMR 3-4821 TMR 3-4822 TMR 3-4823 http://www.tracopower.com Input voltage range 4.5 – 9.0 VDC (5 VDC nominal) 9 – 18 VDC (12 VDC nominal) 18 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output current max. 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA Efficiency typ. 73 % 77 % 79 % 80 % 77 % 79 % 80 % 74 % 78 % 80 % 81 % 80 % 81 % 81 % 74 % 78 % 80 % 81 % 80 % 81 % 81 % 74 % 78 % 80 % 81 % 80 % 81 % 81 % Page of 3 DC/DC Converters TMR 3 Series 3 Watt Input Specifications Input current at full load (nominal input voltage) 4.5–9 9-–18 18–36 36–75 Vin Vin Vin Vin models: models: models: models: 820 mA max. 330 mA max. 170 mA max. 85 mA max. Surge voltage (100 msec. max.) 4.5–9 9-–18 18–36 36–75 Vin Vin Vin Vin models: models: models: models: 15 V max. 36 V max. 50 V max. 100 V max. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS300 132 part 4.4) Input filter capacitor type (see application note for compliance to EN 55022 class A/B) Start up time < 1ms at nominal input and resistive load Output Specifications Voltage set accuracy ± 1 % max Regulation – – – – Input variation Vin min. to Vin max. 0.2 % max. Load variation 5 – 100% single output models: 0.5 % max. dual output models: 1.0 % max. balanced load single output models: 1.0 % max. Load variation 0 – 100% dual output models: 1.0 % max. balanced load Load cross regulation 25/100% 5.0 % max. (dual output models) Minimum load 0% of rated max. load Temperature coefficient 0.1 %/K Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max. Start up time (constant resistive load) – Power On 30 ms typ. – Remote On 30 ms typ. Transient response setting time (25% load step change) 500 µs typ. Temperature coefficient ± 0.1 %/°C Short circuit protection continuous, automatic recovery Capacitive load 3.3 VDC / 5 12 VDC / 15 ±5 VDC / ±15 ±15 VDC VDC VDC VDC output output output output models: models: models: models: 1‘760 µF max. / 1’000 µF max. 170 µF max. / 110 µF max. ± 470 µF max. / ± 100 µF max. ± 47 µF max. General Specifications Temperature ranges – Operating – 40 °C ... + 70 °C (no derating) – Case temperature +100 °C max. – Storage – 55 °C ... + 125 °C Load derating 3.5 %/K above 70°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F ground benign) >2.4 Mio h @ 25°C Isolation voltage (60 sec) – Input/Output 1’500 VDC Isolation capacity – Input/Output 1000 pF max. Isolation resistance – Input/Output (500 VDC) >10 GOhm Switching frequency 100 kHz (PWM) Remote On/Off – On: open or high impedance – Off: 2...4 mA current applied via 1KOhm resistor 2.5 mA max. – Off stand by input current All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page of 3 DC/DC Converters TMR 3 Series 3 Watt Physical Specifications Case material non-conductive plastic Potting material silicon, UL 94V-0 rated Weight 4.8g (0.17oz) Application note can be downloaded under: www.tracopower.com/products/tmr3_application.pdf Outline Dimensions mm (inches) 5 6 7 8 3.2 2.0 ±0.5 (0.08 ±0.025 ) 2.54 2.54 (0.1) (0.1) Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 5 No function No function 6 +Vout +Vout 7 –Vout Common 8 No function –Vout (0.16) 11.1 (0.44) 4.0 0.5 (0.02) 0.5 (0.02) (0.36) 3 9.2 2 (0.13) 1 Pin-Out 0.25 (0.01) Bottom view 2.54 2.54 2.54 5.08 (0.2) (0.1) 21.8 (0.1) (0.1) (0.86) Specifications can be changed any time without notice. Rev. 08/07 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page of 3