DDMZ 0315 Vishay Draloric Ceramic Singlelayer Feed-Through Capacitors 400VDC Feed-through capacitor, bushing-mount type RATED VOLTAGE UR: DIELECTRIC STRENGTH BETWEEN LEADS: 7.0 Hex 9.5 +0.5 Color code ∅ 0.8 400VDC (280VRMS) M5 x 0.5 Thread DESIGN: 1250VDC 1s ≈ 30 16 ± 0.3 DISSIPATION FACTOR tan δ: Ceramic Class 1: see General Information Ceramic Class 2: ≤ 25 • 10-3 70 -1 INSULATION RESISTANCE Ris: +0.2 5.2 -0 Ceramic Class 1: ≥ 1 • 1010Ω Ceramic Class 2: ≥ 5 • 109Ω CATEGORY TEMPERATURE RANGE ϑA: Recommended Mounting Hole 4.2 +0.2 Ceramic Class 1: (- 55 to + 125)˚C Ceramic Class 2: (- 25 to + 85)˚C • Dimensions in mm PERMISSIBLE REACTIVE POWER: PERMISSIBLE POWER LOSS: 5.4VAr (Class 2), 100VAr (Class 1B,1F) 150mW DIRECT CURRENT IDC: MARKING: Capacitance value, Tolerance letter, Ceramic dielectric color code 10A MAXIMUM PERMISSIBLE TORQUE: 0.6 Nm (clearance hole mounting) 0.4 Nm (threaded hole mounting) CLASS 1B MOUNTING HARDWARE: A threaded nut (7.0 HEX) is supplied in bulk CERAMIC DIELECTRIC P 100 N 470 N 750 1F -0 N 1500 R 700 2 R 2000 R 4000 R 6000 • other capacitance values are available on request CAPACITANCE VALUES (pF) 47 68 75 100 150 200 220 240 330 470 680 1000 1500 2200 3300 4700 TOLERANCE ± 10%, ± 20% ± 20%, - 20 + 50% - 20 + 50%, - 20 + 80% ORDERING INFORMATION DDML 0315 Document Number 22049 Revision 04-Sep-00 400VDC 4700pF For technical questions, contact [email protected] - 20 + 80% R 6000 www.vishay.com 89