Part Number: www.SunLED.com DUG25C-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY Features ● 1.02 INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●HIGH LIGHT OUTPUT. ●EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ●I.C. COMPATIBLE. ●MECHANICALLY RUGGED. ●STANARD : GRAY FACE, WHITE SEGMENT. zRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UG (GaP) Unit Operating Characteristics (TA=25°C) Forward Voltage (Typ.) Per Segment Or ( DP) UG (GaP) Unit VF 4.0(2.0) V VF 5.0(2.5) V IR 10 (10) uA Reverse Voltage Per Segment or (Dp) VR 10(5) V Forward Current Per Segment or (Dp) IF 25(25) mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Per Segment or (Dp) iFS 140(140) mA Per Segment Or (Dp) Power Dissipation Per Segment or (Dp) PT 125(62.5) mW Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 565 nm Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Storage Temperature (IF=10mA) Forward Voltage (Max.) Per Segment Or ( DP) (IF=10mA) Reverse Current Lead Solder Temperature [2mm Below Package Base] Published Date : MAR 13,2008 °C 260°C For 3~5 Seconds Drawing No : SDSA2139 (VR=20(10)V) V3 Checked : Shin Chi P.1/5 Part Number: www.SunLED.com DUG25C-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY Part Number DUG25C-1 Emitting Color Green Emitting Material GaP Luminous Intensity (IF=10mA) ucd min. typ. 4700 23990 Wavelength nm λP Description 565 Common Cathode, Rt. Hand Decimal UG Published Date : MAR 13,2008 Drawing No : SDSA2139 V3 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com DUG25C-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY Published Date : MAR 13,2008 Drawing No : SDSA2139 V3 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com DUG25C-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 13,2008 Drawing No : SDSA2139 V3 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com DUG25C-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 13,2008 Drawing No : SDSA2139 DUG25C-1 V3 Checked : Shin Chi P.5/5