Part Number: DUY100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com Features ● LARGE SIZE. ● 4.0 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● HIGH LIGHT OUTPUT. ● EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ● I.C. COMPATIBLE. ● MECHANICALLY RUGGED. ● STANDARD : GRAY FACE, WHITE SEGMENT. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) UY (GaAsP/GaP) Unit UY (GaAsP/GaP) Unit Forward Voltage (Typ.) Per Segment Or (Dp) (IF=10mA) VF 7.8 (3.9) V Forward Voltage (Max.) Per Segment Or (Dp) (IF=10mA) VF 10.0 (5.0) V Reverse Voltage Per Segment Or (Dp) VR 20 (10) V Forward Current Per Segment Or (Dp) IF 60 (30) mA IR 20 (10) uA Forward Current (Peak) Per Segment Or (Dp) 1/10 Duty Cycle 0.1ms Pulse Width Reverse Current Per Segment Or (Dp) (Max.) (VR=20(10)V) iFS 280 (140) mA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 590 nm Power Dissipation Per Segment Or (Dp) PT 600 (150) mW Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 588 nm Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number DUY100A Emitting Color Yellow Published Date : MAR 12,2008 °C 260°C For 3~5 Seconds Emitting Material GaAsP/GaP Luminous Intensity (IF=10mA) ucd min. typ. 8000 25990 Drawing No : SDSA2198 Wavelength nm λP Description 590 Common Anode, Rt. Hand Decimal V3 Checked : Shin Chi P.1/5 Part Number: DUY100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com UY Published Date : MAR 12,2008 Drawing No : SDSA2198 V3 Checked : Shin Chi P.2/5 Part Number: 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com Published Date : MAR 12,2008 DUY100A Drawing No : SDSA2198 V3 Checked : Shin Chi P.3/5 Part Number: DUY100A 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com DUY100A Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 12,2008 Drawing No : SDSA2198 V3 Checked : Shin Chi P.4/5 Part Number: 100mm (4.0") SINGLE DIGIT NUMERIC DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 12,2008 DUY100A Drawing No : SDSA2198 DUY100A V3 Checked : Shin Chi P.5/5