SP10200 VOLTAGE 200V 10.0AMP Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free ITO-220 FEATURES * Low forward voltage drop * High current capability * High reliability * High surge current capability * Epitaxial construction 10 0.5 0.2 0.1 3.2 4.5 0.2 0.3 3.7 0.2 0.7 2.54 0.2 2.54 13Min 1.3 0.2 * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Lead solderable per MIL-STD-202, method 208 guaranteed * Polarity: As Marked * Mounting position: Any 15 2.7 MECHANICAL DATA 0.3 0.2 2.8 0.2 0.5 2.6 0.2 0.2 0.2 * Weight: 2.24 grams(Approximately) PIN 1 PIN 3 CASE PIN 2 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SP10200 200 200 200 UNITS V V V 10 A 120 A Maximum Instantaneous Forward Voltage (IF = 5 Amps,TF = 25 C) Maximum Instantaneous Forward Voltage (IF = 5 Amps,TF = 125 C) 0.92 0.80 V Maximum DC Reverse Current Ta=25 C 0.02 mA at Rated DC Blocking Voltage Typical Junction Capacitance (Note1) T ypical T hermal R es is tance R TJ A (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG Ta=125 C 10 350 2.0 -50 +150 mA pF C/W C C Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) -65 +175 NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Case. http://www.SeCoSGmbH.com 01-Jun-2006 Rev. B Any changing of specification will not be informed individual Page 1 of 2 SP10200 VOLTAGE 200V 10 .0AMP Schottky Barrier Rectifiers Elektronische Bauelemente RATING AND CHARACTERISTIC CURVES Typical Forward Characteristic Typical Forward Current Derating Curve 5 0 20 50 100 190 150 Tc, Case Temperature (℃) Instantaneous Forward Current (A),Per Leg Average Forward Current (A); per Leg 100 7 10 125℃ 75℃ 1 25℃ Typical Junction Capacitance 0.1 0.4 Junction Capacitance (pF) 0.7 0.6 0.5 800 0.8 0.9 1.0 Forward Voltage (V) 600 400 Typical Reverse Characteristic 200 100 125℃ 0 100 10 1 0.1 Revise Voltage (%) 100℃ 10 Reverse Current(uA) Maximum Non- Repetitive Forward Surge Current Peak Forwad surge Current (A) 200 160 Tj=25℃ 8.3mS Single half Sine Wave JEDEC Method 120 75℃ 1 50℃ 80 0.1 25℃ 40 0 0 http://www.SeCoSGmbH.com 01-Jun-2006 Rev. B 10 Number of Cycles at 60Hz 100 0.01 10 40 80 120 180 220 Reverse Voltage(V) Any changing of specification will not be informed individua l Page 2 of 2