SDA004 Pb DATA BUS TRANSIENT SUPPRESSOR Lead-free Features · · · · · · · ESD Protection >30kV (Human Body Model) (Note 1) A SOT-363 Ultra-Small Surface Mount Package Protects 2 Data Lines Dim Min Max A 0.10 0.30 Low Capacitance 3pF Typ. B 1.15 1.35 Protects USB 2.0 and USB 1.1 C 2.00 2.20 D 0.65 Nominal F 0.30 0.40 H 1.80 2.20 J ¾ 0.10 K 0.90 1.00 Low Leakage <25nA B C TOP VIEW Lead Free by Design/RoHS Compliant (Note 4) H K IEC Compatibility (Note 1) · · · 61000-4-2 (ESD) Air-30kV Contact-30kV M J D 61000-4-4 (EFT) 40A, 5/50 ns 61000-4-5 (Surge) 8x20ms, 20 Amperes I/01 V p2 L F VN 2 0.25 0.40 0.10 0.25 a 0° 8° All Dimensions in mm Mechanical Data · · Case: SOT-363 · · Moisture Sensitivity: Level 1 per J-STD-020C · · · L M VN1 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 VBUS/VCC Terminals: Finish ¾ Matte Tin annealed over Alloy 42 leadframe. Solderable per MIL-STD-202, Method 208 Orientation: See Diagram Below Marking: See Last Page Vp1 I/02 Vp2 Vp1 I/02 Data Line n+1 Data I/01 Line n Weight: 0.006 grams (approximate) VN2 VN1 Ground APPLICATION Maximum Ratings @ TA = 25°C unless otherwise specified Characteristic Symbol Value Unit VRM 100 V VRRM VRWM VR 80 V Forward Continuous Current (Note 2) IFM 500 mA Repetitive Peak Forward Current @ Tp = 5ms, f = 50kHz (Note 2) IFRM 1000 mA IFSM 20 2.0 A Clamping Voltage (Note 3) @ Ipp = 20A 8x20ms Waveform VC 16 V Power Dissipation (Note 2) Pd 200 mW RqJA 625 °C/W Tj , TSTG -65 to +150 °C Non-Repetitive Peak Reverse Voltage Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Non-Repetitive Peak Forward Surge Current @ t = 1.0ms @ t = 1.0s Thermal Resistance, Junction to Ambient Air (Note 2) Operating and Storage Temperature Range Notes: 1. Tested with V P connected to VN to simulate appropriate VBUS/VCC decoupling to ground. 2. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 3. Referenced to Vp or VN. 4. No purposefully added lead. DS30452 Rev. 4 - 2 1 of 4 www.diodes.com SDA004 ã Diodes Incorporated Electrical Characteristics @ TA = 25°C unless otherwise specified Characteristic Symbol Min Typ Max Unit V(BR)R 80 ¾ ¾ V IR = 100mA Forward Voltage VF 0.62 ¾ ¾ ¾ ¾ 0.72 0.93 1.0 1.25 V IF = 5.0mA IF = 20mA IF = 100mA IF = 150mA Reverse Current (Note 5) IR ¾ ¾ 100 50 30 25 nA mA mA nA VR = 70V VR = 75V, Tj = 150°C VR = 25V, Tj = 150°C VR = 20V Capacitance, Between I/O Lines (I/O1 & I/O2) CLL ¾ 2.5 4.0 pF VR = 0V, f = 1.0MHz Capacitance Between I/O Line and Ground CLG ¾ 3.3 5.3 pF VR = 0V, f = 1.0MHz trr ¾ ¾ 4.0 ns VR = 6V, IF = 5mA Reverse Breakdown Voltage (Note 5) Reverse Recovery Time 5. Short duration test pulse used to minimize self-heating effect. 10.0 IF, INSTANTANEOUS FORWARD CURRENT (mA) IF, INSTANTANEOUS FORWARD CURRENT (A) Notes: TA = 25ºC 1.0 0.4 1000 100 10 TA = -40ºC TA = 0ºC TA = 25ºC 1 TA = 75ºC TA = 125ºC 0.1 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 0 0 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, Low Current VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics, High Current 6 10000 f = 1MHz TA = 125ºC CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (nA) Test Condition 1000 TA = 75ºC 100 TA = 25ºC 10 TA = 0ºC 1 5 4 3 2 1 TA = -40ºC 0 0.1 0 0 20 40 60 80 100 VR, REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics DS30452 Rev. 4 - 2 2 of 4 www.diodes.com 10 20 30 40 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Capacitance vs. Reverse Voltage One Diode Element SDA004 Note 2 14 Pd, POWER DISSIPATION (mW) VC, TYPICAL CLAMPING VOLTAGE (V), (ONE DIODE) 250 16 12 10 8 6 4 200 150 100 50 2 0 0 2 0 4 6 8 10 12 14 16 18 20 40 0 80 160 120 200 TA, AMBIENT TEMPERATURE (° C) Fig. 6 Power Derating Curve, Total Package USB V INPUT BUS PORT VBUS VBUS VBUS VBUS USB OUTPUT PORT VBUS D+ D+ USB CONTROLLER D- DGND GND SDA004 SDA004 TVS* OR DECOUPLING CAPACITOR RECOMMENDED * MMBZ6V8AL OR EQUIVALENT ESD PROTECTION - USB APPLICATION DS30452 Rev. 4 - 2 3 of 4 www.diodes.com SDA004 Ordering Information Notes: (Note 6) Device Packaging Shipping SDA004-7 SOT-363 3000/Tape & Reel 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information xAB KAB or JAB = Product Type Marking Code YM = Date Code Marking Y = Year ex: R = 2004 M = Month ex: 9 = September YM xAB YM SOT-363 Date Code Key Year 2004 2005 2006 2007 2008 2009 2010 2011 2012 Code R S T U V W X Y Z Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30452 Rev. 4 - 2 4 of 4 www.diodes.com SDA004