MAXIM MAX9213ETM+

19-2828; Rev 5; 3/12
KIT
ATION
EVALU
E
L
B
A
IL
AVA
Programmable DC-Balanced
21-Bit Serializers
Features
The MAX9209/MAX9213 serialize 21 bits of LVTTL/
LVCMOS parallel input data to three LVDS outputs. A
parallel rate clock on a fourth LVDS output provides
timing for deserialization.
The MAX9209/MAX9213 feature programmable DC balance, which allows isolation between the serializer and
deserializer using AC-coupling. The DC balance circuits
on each channel code the data, limiting the imbalance
of transmitted ones and zeros to a defined range. The
companion MAX9210/MAX9214 deserializers decode
the data. When DC balance is not programmed, the
serializers are compatible with non-DC-balanced, 21-bit
serializers such as the DS90CR215 and DS90CR217.
o Programmable DC-Balanced or Non-DC-Balanced
Operation
Two frequency ranges and two DC-balance default
conditions are available for maximum replacement flexibility and compatibility with existing non-DC-balanced
serializers.
The MAX9209/MAX9213 are available in TSSOP and
space-saving TQFN packages.
Applications
o DC Balance Allows AC-Coupling for Ground-Shift
Tolerance
o As Low as 8MHz Operation
o Pin Compatible with DS90CR215 and DS90CR217
in Non-DC-Balanced Mode
o Integrated 110Ω (DC-Balanced) and 410Ω (NonDC-Balanced) Output Resistors
o 5V Tolerant LVTTL/LVCMOS Data Inputs
o PLL Requires No External Components
o Up to 1.785Gbps Throughput
o LVDS Outputs Meet IEC 61000-4-2 and ISO 10605
Requirements
o LVDS Outputs Conform to ANSI TIA/EIA-644
LVDS Standard
Automotive Navigation Systems
o Low-Profile 48-Lead TSSOP and Space-Saving
TQFN Packages
Automotive DVD Entertainment Systems
o -40°C to +85°C Operating Temperature Range
Digital Copiers
o +3.3V Supply
Laser Printers
Ordering Information
Functional Diagram
PART
MAX9209
MAX9213
LVDS DRIVER 0
TxOUT0+
TxIN 0 - 20
21
TIMING
CONTROL
DCB/NC
PARALLEL-TOSERIAL
CONVERTER
AND
DC-BALANCE
LOGIC
TxOUT0LVDS DRIVER 1
TxOUT1+
TxOUT1LVDS DRIVER 2
TxOUT2+
TEMP. RANGE
PIN-PACKAGE
MAX9209EUM+
-40°C to +85°C
48 TSSOP
MAX9209EUM/V+
-40°C to +85°C
48 TSSOP
MAX9209GUM+
-40°C to +105°C
MAX9213ETM+
-40°C to +85°C
48 TQFN-EP*
48 TSSOP
MAX9213EUM+
-40°C to +85°C
48 TSSOP
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified part.
*EP = Exposed pad.
TxOUT2LVDS CLK
TxCLK OUT+
TxCLK IN
PLL
7X OR 9X
CLOCK
GENERATOR
TxCLK OUT-
Pin Configurations appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX9209/MAX9213
General Description
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
ABSOLUTE MAXIMUM RATINGS
VCC to GND ...........................................................-0.5V to +4.0V
LVDS Outputs (TxOUT_, TxCLK OUT_) to GND ...-0.5V to +4.0V
5V Tolerant LVTTL/LVCMOS Inputs
(TxIN_, TxCLK IN, PWRDWN) to GND ..............-0.5V to +6.0V
(DCB/NC) to GND ......................................-0.5V to (VCC + 0.5V)
LVDS Outputs (TxOUT_, TxCLK OUT_)
Short to GND and Differential Short .......................Continuous
Continuous Power Dissipation (multilayer board, TA = +70°C)
48-Pin TSSOP (derate 16mW/°C above +70°C) ....... 1282mW
48-Pin TQFN (derate 40mW/°C above +70°C) ..........3200mW
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
ESD Protection
Human Body Model (RD = 1.5kΩ, CS = 100pF)
All Pins to GND..............................................................±2kV
IEC 61000-4-2 (RD = 330Ω, CS = 150pF)
Contact Discharge (TxOUT_, TxCLK OUT_) to GND ....±8kV
Air Gap Discharge (TxOUT_, TxCLK OUT_) to GND ..±15kV
ISO 10605 (RD = 2kΩ, CS = 330pF)
Contact Discharge (TxOUT_, TxCLK OUT_) to GND ....±8kV
Air Gap Discharge (TxOUT_, TxCLK OUT_) to GND ..±25kV
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(VCC = +3.0V to +3.6V, RL = 100Ω ±1%, PWRDWN = high, DCB/NC = high or low, unless otherwise noted. Typical values are at VCC
= +3.3V, TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
SINGLE-ENDED INPUTS (TxIN_, TxCLK IN, PWRDWN, DCB/NC)
TxIN_, TxCLK IN, PWRDWN
High-Level Input Voltage
VIH
Low-Level Input Voltage
VIL
Input Current
IIN
Input Clamp Voltage
VCL
DCB/NC
VIN = high or low, PWRDWN = high or low
2.0
5.5
2.0
VCC +
0.3
-0.3
+0.8
V
-20
+20
µA
-0.9
-1.5
V
350
450
mV
2
25
mV
1.25
1.375
V
10
30
mV
ICL = -18mA
V
LVDS OUTPUTS (TxOUT_, TxCLK OUT)
Differential Output Voltage
Change in VOD Between
Complementary Output States
Output Offset Voltage
Change in VOS Between
Complementary Output States
Output Short-Circuit Current
Magnitude of Differential Output
Short-Circuit Current
VOD
Figure 1
∆VOD
Figure 1
VOS
Figure 1
∆VOS
Figure 1
IOS
IOSD
2
RO
1.125
VOUT+ or VOUT- = 0V or VCC,
non-DC-balanced mode
-10
±5.7
+10
VOUT+ or VOUT- = 0V or VCC,
DC-balanced mode
-15
±8.2
+15
VOD = 0V, non-DC-balanced mode
(Note 3)
5.7
10
VOD = 0V, DC-balanced mode (Note 3)
8.2
15
DC-balanced mode
Differential Output Resistance
250
Non-DC-balanced
mode
-40°C to +105°C
-40°C to +105°C
mA
78
110
147
78
110
150
292
410
547
292
410
564
_______________________________________________________________________________________
mA
Ω
Programmable DC-Balanced
21-Bit Serializers
(VCC = +3.0V to +3.6V, RL = 100Ω ±1%, PWRDWN = high, DCB/NC = high or low, unless otherwise noted. Typical values are at VCC
= +3.3V, TA = +25°C.) (Notes 1, 2)
PARAMETER
Output High-Impedance Current
SYMBOL
IOZ
CONDITIONS
DC-balanced mode,
worst-case pattern,
CL = 5pF, Figure 2
Worst-Case Supply Current
ICCW
Non-DC-balanced
mode, worst-case
pattern, CL = 5pF,
Figure 2
Power-Down Supply Current
ICCZ
MIN
TYP
MAX
UNITS
-0.5
±0.1
+0.5
µA
8MHz MAX9209
40
54
16MHz MAX9209
48
68
34MHz MAX9209
71
90
16MHz MAX9213
46
64
34MHz MAX9213
59
87
66MHz MAX9213
94
108
10MHz MAX9209
30
39
20MHz MAX9209
37
53
33MHz MAX9209
49
70
40MHz MAX9209
56
75
20MHz MAX9213
36
49
33MHz MAX9213
45
62
40MHz MAX9213
49
70
66MHz MAX9213
68
89
85MHz MAX9213
83
100
17
50
PWRDWN = low or VCC = 0V,
VOUT+ = 0V or 3.6V, VOUT- = 0V or 3.6V
PWRDWN = low
mA
µA
_______________________________________________________________________________________
3
MAX9209/MAX9213
DC ELECTRICAL CHARACTERISTICS (continued)
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
AC ELECTRICAL CHARACTERISTICS
(VCC = +3.0V to +3.6V, RL = 100Ω ±1%, CL = 5pF, PWRDWN = high, DCB/NC = high or low, unless otherwise noted. Typical values
are at VCC = +3.3V, TA = +25°C.) (Notes 4, 5)
PARAMETER
SYMBOL
LVDS Low-to-High Transition
Time
LLHT
Figure 3
LVDS High-to-Low Transition
Time
LHLT
Figure 3
TxCLK IN Transition Time
TCIT
Figure 4
CONDITIONS
MAX9209
MIN
150
TYP
280
MAX
400
MAX9213
150
260
350
N = 0, 1, 2, 3,
4, 5, 6
non-DCbalanced mode,
Figure 5 (Note 6)
Output Pulse Position
150
280
400
150
260
350
4
10MHz MAX9209
N/7 x TCIP
N/7 x TCIP
N/7 x TCIP
- 0.25
+ 0.25
20MHz MAX9209
N/7 x TCIP
N/7 x TCIP
N/7 x TCIP
- 0.15
+ 0.15
40MHz MAX9209
N/7 x TCIP
N/7 x TCIP
N/7 x TCIP
- 0.1
+ 0.1
20MHz MAX9213
N/7 x TCIP
N/7 x TCIP
N/7 x TCIP
- 0.25
+ 0.25
40MHz MAX9213
N/7 x TCIP
N/7 x TCIP
N/7 x TCIP
- 0.15
+ 0.15
85MHz MAX9213
N/7 x TCIP
N/7 x TCIP
N/7 x TCIP
+ 0.1
- 0.1
8MHz MAX9209
N/9 x TCIP
N/9 x TCIP
N/9 x TCIP
+ 0.25
- 0.25
16MHz MAX9209
N/9 x TCIP
N/9 x TCIP
N/9 x TCIP
+ 0.15
- 0.15
34MHz MAX9209
N/9 x TCIP
N/9 x TCIP
N/9 x TCIP
+ 0.1
- 0.1
16MHz MAX9213
N/9 x TCIP
N/9 x TCIP
N/9 x TCIP
+ 0.25
- 0.25
34MHz MAX9213
N/9 x TCIP
N/9 x TCIP
N/9 x TCIP
+ 0.15
- 0.15
66MHz MAX9213
N/9 x TCIP
N/9 x TCIP
N/9 x TCIP
- 0.1
+ 0.1
TPPosN
ps
ps
ns
ns
N = 0, 1, 2, 3,
4, 5, 6, 7, 8
DC-balanced
mode, Figure 6
(Note 6)
4
MAX9209
MAX9213
UNITS
_______________________________________________________________________________________
Programmable DC-Balanced
21-Bit Serializers
(VCC = +3.0V to +3.6V, RL = 100Ω ±1%, CL = 5pF, PWRDWN = high, DCB/NC = high or low, unless otherwise noted. Typical values
are at VCC = +3.3V, TA = +25°C.) (Notes 4, 5)
PARAMETER
TxCLK IN High Time
SYMBOL
TCIH
Figure 7
MIN
0.3 x TCIP
TCIL
Figure 7
0.3 x TCIP
TxCLK IN Low Time
CONDITIONS
TYP
MAX
UNITS
0.7 x TCIP
ns
0.7 x TCIP
ns
TxIN to TxCLK IN Setup
TSTC
Figure 7
2.2
ns
TxIN to TxCLK IN Hold
THTC
Figure 7
0
ns
TxCLK IN to TxCLK OUT Delay
TCCD
Serializer Phase-Locked Loop Set
TPLLS
Figure 9
Serializer Power-Down Delay
TPDD
Figure 10
TxCLK IN Cycle-to-Cycle Jitter
(Input Clock Requirement)
TJIT
Magnitude of Differential Output
Voltage
VOD
Non-DC-balanced mode, Figure 8
3.5
4.5
6.0
DC-balanced mode, Figure 8
4.7
5.9
7.2
32800 x
TCIP
ns
50
ns
2
ns
14
595Mbps data rate, worst-case
pattern
ns
250
mV
Note 1: Current into a pin is defined as positive. Current out of a pin is defined as negative. All voltages are referenced to ground
except VOD, ∆VOD, and ∆VOS.
Note 2: Maximum and minimum limits over temperature are guaranteed by design and characterization. Devices are production
tested at TA = +25°C.
Note 3: Guaranteed by design.
Note 4: TCIP is the period of TxCLK IN.
Note 5: AC parameters are guaranteed by design and characterization, and are not production tested. Limits are set at ±6 sigma.
Note 6: Pulse position TPPosN is characterized using 27 - 1 PRBS data.
Typical Operating Characteristics
(VCC = +3.3V, RL = 100Ω ±1%, CL = 5pF, PWRDWN = high, TA = +25°C, unless otherwise noted.)
WORST-CASE
PATTERN
60
27 - 1 PRBS
80
WORST-CASE
PATTERN
60
40
20
10
20
30
FREQUENCY (MHz)
40
50
MAX9209 toc03
MAX9213
NON-DC-BALANCED MODE
100
80
WORST-CASE
PATTERN
60
27 - 1 PRBS
40
27 - 1 PRBS
20
20
0
120
MAX9209 toc02
MAX9209
NON-DC-BALANCED MODE
SUPPLY CURRENT (mA)
80
40
100
MAX9209 toc01
MAX9209
DC-BALANCED MODE
SUPPLY CURRENT (mA)
SUPPLY CURRENT (mA)
100
WORST-CASE AND PRBS SUPPLY CURRENT
vs. FREQUENCY
WORST-CASE PATTERN AND PRBS
SUPPLY CURRENT vs. FREQUENCY
WORST-CASE PATTERN AND PRBS
SUPPLY CURRENT vs. FREQUENCY
0
10
20
30
40
FREQUENCY (MHz)
50
60
15
30
45
60
75
90
FREQUENCY (MHz)
_______________________________________________________________________________________
5
MAX9209/MAX9213
AC ELECTRICAL CHARACTERISTICS (continued)
Typical Operating Characteristics (continued)
(VCC = +3.3V, RL = 100Ω ±1%, CL = 5pF, PWRDWN = high, TA = +25°C, unless otherwise noted.)
100
2m OF CAT-5
UTP CABLE
TxCLK IN = 85MHz
DC-COUPLED
5m OF CAT-5
UTP CABLE
TxCLK IN = 85MHz
DC-COUPLED
WORST-CASE
PATTERN
80
100mV/div
100mV/div
0V
DIFFERENTIAL
0V
DIFFERENTIAL
60
27 - 1 PRBS
40
ALL-CHANNELS
SWITCHING
20
15
30
45
60
27 - 1 PRBS PATTERN
100Ω TERMINATION
300ps/div
300ps/div
75
27 - 1 PRBS PATTERN
100Ω TERMINATION
ALL-CHANNELS
SWITCHING
FREQUENCY (MHz)
MAX9213
EYE DIAGRAM—NON-DC-BALANCED MODE
100mV/div
0V
DIFFERENTIAL
ALL-CHANNELS
SWITCHING
27 - 1 PRBS PATTERN
100Ω TERMINATION
0V
DIFFERENTIAL
ALL-CHANNELS
SWITCHING
27 - 1 PRBS PATTERN
100Ω TERMINATION
MAX9213
EYE DIAGRAM—DC-BALANCED MODE
MAX9213
EYE DIAGRAM—DC-BALANCED MODE
100mV/div
0V
DIFFERENTIAL
ALL-CHANNELS
SWITCHING
27 - 1 PRBS PATTERN
100Ω TERMINATION
300ps/div
MAX9209 TOC09
300ps/div
5m OF CAT-5
UTP CABLE
MAX9209 TOC08
2m OF CAT-5
UTP CABLE
300ps/div
TxCLK IN = 66MHz AC-COUPLED
USING 0.1µF CAPACITORS
6
TxCLK IN = 66MHz AC-COUPLED
USING 0.1µF CAPACITORS
TxCLK IN = 66MHz AC-COUPLED
USING 0.1µF CAPACITORS
100mV/div
10m OF CAT-5
UTP CABLE
0V
DIFFERENTIAL
ALL-CHANNELS
SWITCHING
27 - 1 PRBS PATTERN
100Ω TERMINATION
300ps/div
_______________________________________________________________________________________
MAX9209 TOC10
100mV/div
10m OF CAT-5
UTP CABLE
MAX9209 TOC07
TxCLK IN = 85MHz
DC-COUPLED
MAX9213
EYE DIAGRAM—DC-BALANCED MODE
MAX9209 TOC06
MAX9213
DC-BALANCED MODE
MAX9209 TOC05
MAX9209 toc04
120
MAX9213
EYE DIAGRAM—NON-DC-BALANCED MODE
MAX9213
EYE DIAGRAM—NON-DC-BALANCED MODE
WORST-CASE PATTERN AND PRBS
SUPPLY CURRENT vs. FREQUENCY
SUPPLY CURRENT (mA)
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
Programmable DC-Balanced
21-Bit Serializers
PIN
TSSOP
TQFN
1, 3, 4, 44, 45, 47, 48,
38, 39, 41, 42, 43, 45, 46
NAME
TxIN0–TxIN6
FUNCTION
5V Tolerant LVTTL/LVCMOS Channel 0 Data Inputs.
Internally pulled down to GND.
2, 8, 14, 21
2, 8, 15, 44
VCC
Digital Supply Voltage
5, 11, 17, 24, 46
5, 11, 18, 40, 47
GND
Ground
6, 7, 9, 10, 12, 13, 15
1, 3, 4, 6, 7, 9, 48
TxIN7–TxIN13
5V Tolerant LVTTL/LVCMOS Channel 1 Data Inputs.
Internally pulled down to GND.
16, 18, 19, 20, 22, 23, 25
10, 12, 13, 14, 16, 17, 19
TxIN14–TxIN20
5V Tolerant LVTTL/LVCMOS Channel 2 Data Inputs.
Internally pulled down to GND.
26
20
TxCLK IN
5V Tolerant LVTTL/LVCMOS Parallel Rate Clock Input.
Internally pulled down to GND.
27
21
PWRDWN
5V Tolerant LVTTL/LVCMOS Power-Down Input. Internally
pulled down to GND. Outputs are high impedance when
PWRDWN = low or open.
28, 30
22, 24
PLL GND
PLL Ground
29
23
PLL VCC
PLL Supply Voltage
31, 36, 42
25, 30, 36
LVDS GND
32
26
TxCLK OUT+
Noninverting LVDS Parallel Rate Clock Output
33
27
TxCLK OUT-
Inverting LVDS Parallel Rate Clock Output
34
28
TxOUT2+
Noninverting Channel 2 LVDS Serial Data Output
35
29
TxOUT2-
Inverting Channel 2 LVDS Serial Data Output
37
31
LVDS VCC
38
32
TxOUT1+
Noninverting Channel 1 LVDS Serial Data Output
39
33
TxOUT1-
Inverting Channel 1 LVDS Serial Data Output
40
34
TxOUT0+
Noninverting Channel 0 LVDS Serial Data Output
41
35
TxOUT0-
Inverting Channel 0 LVDS Serial Data Output
LVDS Ground
LVDS Supply Voltage
43
37
DCB/NC
LVTTL/LVCMOS DC-Balance Programming Input:
MAX9209: pulled up to VCC
MAX9213: pulled up to VCC
See Table 1.
—
—
EP
Exposed Paddle (TQFN Only). Solder to ground.
_______________________________________________________________________________________
7
MAX9209/MAX9213
Pin Description
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
TxOUT_- OR TxCLK OUT-
VOS(-)
VOS(+)
VOS(-)
TxOUT_+ OR TxCLK OUT+
∆VOS = |VOS(+) - VOS(-)|
VOD(+)
0V
∆VOD = |VOD(+) - VOD(-)|
VOD(-)
VOD(-)
(TxOUT_+) - (TxOUT_-) OR
(TxCLK OUT+) - (TxCLK OUT-)
Figure 1. LVDS Output DC Parameters
TCIP
TxCLK IN
ODD TxIN
EVEN TxIN
Figure 2. Worst-Case Test Pattern
TxOUT_+ OR
TxCLK OUT+
80%
80%
RL
TxOUT_- OR
TxCLK OUT-
CL
CL
20%
(TxOUT_+) - (TxOUT_-) OR
(TxCLK OUT+) - (TxCLK OUT-)
20%
LLHT
LHLT
Figure 3. LVDS Output Load and Transition Times
VIH
90%
90%
10%
10%
TxCLK IN
TCIT
VIL
TCIT
Figure 4. Clock Transition Time Waveform
8
_______________________________________________________________________________________
Programmable DC-Balanced
21-Bit Serializers
MAX9209/MAX9213
TxCLK OUT
(DIFFERENTIAL)
CYCLE N - 1
CYCLE N
TxOUT2
(SINGLE ENDED)
TxIN15
TxIN14
TxIN20
TxIN19
TxIN18
TxIN17
TxIN16
TxIN15
TxIN14
TxOUT1
(SINGLE ENDED)
TxIN8
TxIN7
TxIN13
TxIN12
TxIN11
TxIN10
TxIN9
TxIN8
TxIN7
TxOUT0
(SINGLE ENDED)
TxIN1
TxIN0
TxIN6
TxIN5
TxIN4
TxIN3
TxIN2
TxIN1
TxIN0
TPPos0
TPPos1
TPPos2
TPPos3
TPPos4
TPPos5
TPPos6
Figure 5. Non-DC-Balanced Mode LVDS Output Pulse Position Measurement
Detailed Description
The MAX9209 operates at a parallel clock frequency of
8MHz to 34MHz in DC-balanced mode and 10MHz to
40MHz in non-DC-balanced mode. The MAX9213 operates at a parallel clock frequency of 16MHz to 66MHz
in DC-balanced mode and 20MHz to 85MHz in nonDC-balanced mode.
DC-balanced or non-DC-balanced operation is controlled by the DCB/NC pin (see Table 1). In non-DCbalanced mode, each channel serializes 7 bits every
cycle of the parallel clock. In DC-balanced mode, 9 bits
are serialized every clock cycle (7 data bits + 2 DC-balance bits). The highest data rate in DC-balanced mode
for the MAX9213 is 66MHz x 9 = 594Mbps. In non-DCbalanced mode, the maximum data rate is 85MHz x 7 =
595Mbps. A bit time is 1 divided by the data rate, for
example, 1 / 595Mbps = 1.68ns.
DC Balance
Through data coding, the DC-balance circuits limit the
imbalance of ones and zeros transmitted on each channel. If +1 is assigned to each binary one transmitted
Table 1. DC-Balance Programming
DEVICE
MAX9209
MAX9213
DCB/NC
OPERATING
MODE
OPERATING
FREQUENCY
(MHz)
High or open
DC balanced
8 to 34
Low
Non-DC
balanced
10 to 40
High or open
DC balanced
16 to 66
Low
Non-DC
balanced
20 to 85
and -1 is assigned to each binary zero transmitted, the
variation in the running sum of assigned values is
called the digital sum variation (DSV). The maximum
DSV for the MAX9209/MAX9213 data channels is 10. At
most, 10 more zeros than ones, or 10 more ones than
zeros, are transmitted. The maximum DSV for the clock
channel is 5. Limiting the DSV and choosing the correct
coupling capacitors maintain differential signal amplitude
and reduce jitter due to droop on AC-coupled links.
_______________________________________________________________________________________
9
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
TxCLK OUT
(DIFFERENTIAL)
CYCLE N - 1
CYCLE N
TxOUT2
(SINGLE ENDED)
DCA2
DCB2
TxIN20
TxIN19
TxIN18
TxIN17
TxIN16
TxIN15
TxIN14
DCA2
DCB2
TxOUT1
(SINGLE ENDED)
DCA1
DCB1
TxIN13
TxIN12
TxIN11
TxIN10
TxIN9
TxIN8
TxIN7
DCA1
DCB1
TxOUT0
(SINGLE ENDED)
DCA0
DCB0
TxIN6
TxIN5
TxIN4
TxIN3
TxIN2
TxIN1
TxIN0
DCA0
DCB0
TPPos0
TPPos1
TPPos2
TPPos3
TPPos4
TPPos5
TPPos6
TPPos7
TPPos8
Figure 6. DC-Balanced Mode LVDS Output Pulse Position Measurement
TCIP
2.0V
TxCLK IN
TCIH
1.5V
0.8V
TCIL
TSTC
TxIN 0:20
1.5V
SETUP
THTC
HOLD
1.5V
Figure 7. Setup and Hold, High and Low Times
1.5V
TxCLK IN
TxCLK OUT+
TxCLK OUT-
TCCD
DIFFERENTIAL 0
Figure 8. Clock-In to Clock-Out Delay
10
______________________________________________________________________________________
Programmable DC-Balanced
21-Bit Serializers
MAX9209/MAX9213
2.0V
PWRDWN
3.6V
3.0V
VCC
TPPLS
TxCLK IN
TxOUT_, TxCLK OUT
VOD = 0
HIGH-Z
DIFFERENTIAL 0
Figure 9. PLL Set Time
PWRDWN
0.8V
TxCLK IN
TPDD
TxOUT_, TxCLK OUT
HIGH-Z
Figure 10. Power-Down Delay
TxCLK OUT+
TxCLK OUTCYCLE N - 1
DCA2
CYCLE N
CYCLE N + 1
DCB2
TxIN20
TxIN19
TxIN18
TxIN17
TxIN16
TxIN15
TxIN14
DCA2
DCB2
TxIN20
TxIN19
TxIN18
TxIN17
TxIN16
TxIN15
TxIN14
DCB1
TxIN13
TxIN12
TxIN11
TxIN10
TxIN9
TxIN8
TxIN7
DCA1
DCB1
TxIN13
TxIN12
TxIN11
TxIN10
TxIN9
TxIN8
TxIN7
DCB0
TxIN6
TxIN5
TxIN4
TxIN3
TxIN2
TxIN1
TxIN0
DCA0
DCB0
TxIN6
TxIN5
TxIN4
TxIN3
TxIN2
TxIN1
TxIN0
TxOUT2
DCA1
TxOUT1
DCA0
TxOUT0
Figure 11. DC-Balanced Mode Inputs Mapped to LVDS Outputs
To obtain DC balance on the data channels, the parallel input data is inverted or not inverted, depending on
the sign of the digital sum at the word boundary. Two
complementary bits are appended to each group of 7
parallel input data bits to indicate to the MAX9210/
MAX9214 deserializers whether the data bits are inverted (Figure 11). The deserializer restores the original
state of the parallel data. The LVDS clock signal alternates duty cycles of 4/9 and 5/9, which maintains DC
balance. Figure 12 shows the non-DC-balanced mode
inputs mapped to LVDS outputs.
______________________________________________________________________________________
11
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
TxCLK OUT+
TxCLK OUTCYCLE N - 1
TxIN15
CYCLE N
CYCLE N + 1
TxIN14
TxIN20
TxIN19
TxIN18
TxIN17
TxIN16
TxIN15
TxIN14
TxIN20
TxIN19
TxIN18
TxIN17
TxIN16
TxIN15
TxIN14
TxIN7
TxIN13
TxIN12
TxIN11
TxIN10
TxIN9
TxIN8
TxIN7
TxIN13
TxIN12
TxIN11
TxIN10
TxIN9
TxIN8
TxIN7
TxIN0
TxIN6
TxIN5
TxIN4
TxIN3
TxIN2
TxIN1
TxIN0
TxIN6
TxIN5
TxIN4
TxIN3
TxIN2
TxIN1
TxIN0
TxOUT2
TxIN8
TxOUT1
TxIN1
TxOUT0
Figure 12. Non-DC-Balanced Mode Inputs Mapped to LVDS Outputs
MAX9209
MAX9213
MAX9210
MAX9214
TRANSMISSION LINE
TxOUT
7
RxIN
7
7:1
RO
RT =
100Ω
1:7
7:1
RO
RT =
100Ω
1:7
7:1
RO
RT =
100Ω
1:7
PLL
RO
RT =
100Ω
PLL
7
7
TxIN
7
PWRDWN
TxCLK IN
TxCLK OUT
21:3 SERIALIZER
RxOUT
7
PWRDWN
RxCLK OUT
RxCLK IN
3:21 DESERIALIZER
Figure 13. DC-Coupled Link, Non-DC-Balanced Mode
AC-Coupling Benefits
Bit errors experienced with DC-coupling can be eliminated by increasing the receiver common-mode voltage range by AC-coupling. AC-coupling increases the
common-mode voltage range of an LVDS receiver to
nearly the voltage rating of the capacitor. The typical
LVDS driver output is 350mV centered on an offset volt12
age of 1.25V, making single-ended output voltages of
1.425V and 1.075V. An LVDS receiver accepts signals
from 0V to 2.4V, allowing approximately ±1V commonmode difference between the driver and receiver on a
DC-coupled link (2.4V - 1.425V = 0.975V and 1.075V 0V = 1.075V). Figure 13 shows the DC-coupled link,
non-DC-balanced mode.
______________________________________________________________________________________
Programmable DC-Balanced
21-Bit Serializers
TxOUT
MAX9210
MAX9214
RxIN
7
7
(7 + 2):1
RO
RT =
100Ω
1:(9 - 2)
(7 + 2):1
RO
RT =
100Ω
1:(9 - 2)
(7 + 2):1
RO
RT =
100Ω
1:(9 - 2)
PLL
RO
RT =
100Ω
PLL
7
TxIN
MAX9209/MAX9213
MAX9209
MAX9213
HIGH-FREQUENCY CERAMIC
SURFACE-MOUNT CAPACITORS
CAN ALSO BE PLACED AT
SERIALIZER INSTEAD OF DESERIALIZER.
7
PWRDWN
TxCLK IN
TxCLK OUT
7
RxOUT
7
PWRDWN
RxCLK OUT
RxCLK IN
21:3 SERIALIZER
3:21 DESERIALIZER
Figure 14. Two Capacitors per Link, AC-Coupled, DC-Balanced Mode
Common-mode voltage differences may be due to
ground potential variation or common-mode noise. If
there is more than ±1V of difference, the receiver is not
guaranteed to read the input signal correctly and may
cause bit errors. AC-coupling filters low-frequency
ground shifts and common-mode noise and passes
high-frequency data. A common-mode voltage difference up to the voltage rating of the coupling capacitor
(minus half the differential swing) is tolerated. DC-balanced coding of the data is required to maintain the differential signal amplitude and limit jitter on an
AC-coupled link. A capacitor in series with each output
of the LVDS driver is sufficient for AC-coupling. However,
two capacitors—one at the serializer output and one at
the deserializer input—provide protection in case either
end of the cable is shorted to a high voltage.
5V Tolerant Inputs
All signal and control inputs except DCB/NC are 5V tolerant and are internally pulled down to GND. The
DCB/NC pin has a pullup on the MAX9209/MAX9213.
DCB/NC Pin Default Conditions
The MAX9209/MAX9213 have programmable DC balance/non-DC balance. See Table 1 for DCB/NC default
settings and operating modes.
______________________________________________________________________________________
13
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
HIGH-FREQUENCY CERAMIC
SURFACE-MOUNT CAPACITORS
MAX9209
MAX9213
MAX9210
MAX9214
TxOUT
RxIN
7
RO
RT =
100Ω
1:(9 - 2)
(7 + 2):1
RO
RT =
100Ω
1:(9 - 2)
(7 + 2):1
RO
RT =
100Ω
1:(9 - 2)
PLL
RO
RT =
100Ω
PLL
7
TxIN
7
(7 + 2):1
7
PWRDWN
TxCLK IN
TxCLK OUT
7
RxOUT
7
PWRDWN
RxCLK OUT
RxCLK IN
21:3 SERIALIZER
3:21 DESERIALIZER
Figure 15. Four Capacitors per Link, AC-Coupled, DC-Balanced Mode
Applications Information
Selection of AC-Coupling Capacitors
Voltage droop and the DSV of transmitted symbols
cause signal transitions to start from different voltage
levels. Because the transition time is finite, starting the
signal transition from different voltage levels causes
timing jitter. The time constant for an AC-coupled link
needs to be chosen to reduce droop and jitter to an
acceptable level.
The RC network for an AC-coupled link consists of the
LVDS receiver termination resistor (RT), the LVDS driver
output resistor (RO), and the series AC-coupling capacitors (C). The RC time constant for two equal-value
series capacitors is (C x (RT + RO)) / 2 (Figure 14). The
RC time constant for four equal-value series capacitors
is (C x (RT + RO)) / 4 (Figure 15).
14
RT is required to match the transmission line impedance (usually 100Ω) and RO is determined by the LVDS
driver design, with a minimum value of 78Ω (see the DC
Electrical Characteristics table). This leaves the capacitor selection to change the system time constant.
In the following example, the capacitor value for a
droop of 2% is calculated. Jitter due to this droop is
then calculated assuming a 1ns transition time:
C = -(2 x tB x DSV) / (ln (1 - D) x (RT + RO)) (Eq 1)
where:
C = AC-coupling capacitor (F)
tB = bit time (s)
DSV = digital sum variation (integer)
ln = natural log
D = droop (% of signal amplitude)
RT = termination resistor (Ω)
______________________________________________________________________________________
Programmable DC-Balanced
21-Bit Serializers
C = -(2 x tB x DSV) / (ln (1 - D) x (RT + RO))
C = -(2 x 13.9ns x 10) / (ln (1 - .02) x (100Ω + 78Ω))
C = 0.0773µF
Jitter due to droop is proportional to the droop and
transition time:
tJ = tT x D (Eq 2)
where:
tJ = jitter (s)
tT = transition time (s) (0% to 100%)
D = droop (% of signal amplitude)
Jitter due to 2% droop and assumed 1ns transition time is:
tJ = 1ns x 0.02
tJ = 20ps
The transition time in a real system depends on the frequency response of the cable driven by the serializer.
The capacitor value decreases for a higher frequency
parallel clock and for higher levels of droop and jitter.
Use high-frequency, surface-mount ceramic capacitors.
Equation 1 altered for four series capacitors (Figure 15) is:
C = -(4 x tB x DSV) / (ln (1 - D) x (RT + RO)) (Eq 3)
Integrated Termination
The MAX9209/MAX9213 have an integrated output termination resistor across each of the four LVDS outputs.
These resistors damp reflections from induced noise and
mismatches between the transmission line impedance
and termination resistor at the deserializer input. In DCbalanced mode, the differential output resistance is part
of the RC time constant. In non-DC-balanced mode, the
output termination is increased to 410Ω (typ) to reduce
power. In power-down mode (PWRDWN = low) or when
the power supply is off, the output resistor is switched
out and the LVDS outputs are high impedance.
to 50µA or less. Driving PWRDWN high starts the PLL
lock to the input clock and switches in the output termination resistors. The LVDS outputs are not driven until
the PLL locks. The differential output resistance pulls
the outputs together and the LVDS outputs are high
impedance to ground. If the power supply is turned off,
the output resistors are switched out and the LVDS outputs are high impedance.
PLL Lock Time
The PLL lock time is set by an internal counter. The maximum time to lock is 32,800 clock periods. Power and
clock should be stable to meet the lock-time specification. When the PLL is locking, the LVDS outputs are not
active and have a differential output resistance of RO.
Power-Supply Bypassing
There are separate power domains for LVDS, PLL, and
digital circuits. Bypass each LVDS VCC, PLL VCC, and
VCC pin with high-frequency surface-mount ceramic
0.1µF and 0.001µF capacitors in parallel as close to the
device as possible, with the smallest value capacitor
closest to the supply pin.
LVDS Outputs
The LVDS outputs are current sources. The voltage
swing is proportional to the load impedance. The outputs are rated for a differential load of 100Ω ±1%.
Cables and Connectors
Interconnect for LVDS typically has a differential impedance of 100Ω. Use cables and connectors that have
matched differential impedance to minimize impedance
discontinuities.
Twisted-pair and shielded twisted-pair cables offer
superior signal quality compared to ribbon cable and
tend to generate less EMI due to magnetic field canceling effects. Balanced cables pick up noise as common
mode, which is rejected by the LVDS receiver.
Board Layout
Keep the LVTTL/LVCMOS input and LVDS output signals separated to prevent crosstalk. A four-layer PCB
with separate layers for power, ground, LVDS outputs,
and digital signals is recommended.
PWRDWN and Power-Off
Driving PWRDWN low stops the PLL, switches out the
integrated output termination resistors, puts the LVDS
outputs in high impedance, and reduces supply current
______________________________________________________________________________________
15
MAX9209/MAX9213
RO = output resistance (Ω)
Equation 1 is for two series capacitors (Figure 14). The
bit time (tB) is the period of the parallel clock divided by
9. The DSV is 10. See equation 3 for four series capacitors (Figure 15).
The capacitor for 2% maximum droop at 8MHz parallel
rate clock is:
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
ESD Protection
The MAX9209/MAX9213 ESD tolerance is rated for IEC
61000-4-2, Human Body Model and ISO 10605 standards. IEC 61000-4-2 and ISO 10605 specify ESD tolerance for electronic systems. The IEC 61000-4-2
discharge components are CS = 150pF and RD = 330Ω
(Figure 16). For IEC 61000-4-2, the LVDS outputs are
50Ω TO 100Ω
CHARGE-CURRENTLIMIT RESISTOR
HIGHVOLTAGE
DC
SOURCE
CS
150pF
RD
330Ω
1MΩ
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
CHARGE-CURRENTLIMIT RESISTOR
DEVICE
UNDER
TEST
Figure 16. IEC 61000-4-2 Contact Discharge ESD Test Circuit
50Ω TO 100Ω
CHARGE-CURRENTLIMIT RESISTOR
HIGHVOLTAGE
DC
SOURCE
CS
330pF
rated for ±8kV contact and ±15kV air discharge. The
Human Body Model discharge components are CS =
100pF and RD = 1.5kΩ (Figure 17). For the Human Body
Model, all pins are rated for ±2kV contact discharge. The
ISO 10605 discharge components are CS = 330pF and
RD = 2kΩ (Figure 18). For ISO 10605, the LVDS outputs
are rated for ±8kV contact and ±25kV air discharge.
HIGHVOLTAGE
DC
SOURCE
CS
100pF
RD
1.5kΩ
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Figure 17. Human Body ESD Test Circuit
RD
2kΩ
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
DEVICE
UNDER
TEST
Figure 18. ISO 10605 Contact Discharge ESD Test Circuit
16
______________________________________________________________________________________
DEVICE
UNDER
TEST
Programmable DC-Balanced
21-Bit Serializers
TOP VIEW
36
LVDS GND
VCC 14
35
TxOUT2-
TxIN13
15
34
TxOUT2+
TxIN14
16
33
TxCLK OUT-
GND 17
32
TxCLK OUT+
31
LVDS GND
TxIN16 19
30
PLL GND
TxIN17 20
29
PLL VCC
21
28
PLL GND
TxIN18 22
VCC
27
PWRDWN
TxIN19
23
26
TxCLK IN
GND 24
25
TxIN20
TxIN1
TxIN0
DCB/NC
37
38
39
40
32
TxIN12
VCC
TxIN13
TxIN14
GND
7
TxIN15
TxIN15 18
41
33
5
6
31
MAX9209
MAX9213
30
8
29
9
28
10
27
11
26
EXPOSED PAD
25
12
LVDS GND
TxOUT0TxOUT0+
TxOUT1TxOUT1+
LVDS VCC
LVDS GND
TxOUT2TxOUT2+
TxCLK OUTTxCLK OUT+
LVDS GND
24
TxIN12 13
34
4
23
LVDS VCC
3
22
37
35
PLL GND
PLL VCC
PLL GND
TxIN11 12
36
2
21
TxOUT1+
1
20
38
GND 11
TxIN8
VCC
TxIN9
TxIN10
GND
TxIN11
TxCLK IN
PWRDWN
TxOUT1-
MAX9209
MAX9213
TxIN4
TxIN3
TxIN2
GND
39
TxIN10 10
+
42
TxOUT0+
43
40
19
TxIN9 9
18
TxOUT0-
TxIN5
VCC
LVDS GND
41
44
42
VCC 8
45
TxIN8 7
17
DCB/NC
16
43
TxIN18
TxIN19
GND
TxIN20
TxIN7 6
GND
TxIN6
TxIN0
46
TxIN1
44
15
45
GND 5
VCC
TxIN6 4
TxIN7
GND
47
46
14
TxIN5 3
13
TxIN2
TxIN17
TxIN3
47
TxIN16
48
VCC 2
48
+
TxIN4 1
TQFN
TSSOP
Chip Information
PROCESS: CMOS
Package Information
For the latest package outline information and land patterns
(footprints), go to www.maxim-ic.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE NO.
LAND
PATTERN NO.
48 TSSOP
A48+1
21-0155
90-0124
48 TQFN
T4877+6
21-0144
90-0132
______________________________________________________________________________________
17
MAX9209/MAX9213
Pin Configurations
MAX9209/MAX9213
Programmable DC-Balanced
21-Bit Serializers
Revision History
REVISION
NUMBER
REVISION
DATE
3
6/07
—
4
10/07
Removed all references to MAX9211 and MAX9215.
5
3/12
Updated Ordering Information
DESCRIPTION
PAGES
CHANGED
1–5, 9, 14, 15, 18,
19, 20
1–20
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in
the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
18 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2012 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.