GTM GTT2610

Pb Free Plating Product
ISSUED DATE :2006/06/13
REVISED DATE :
GTT2610
N-CHANNEL ENHANCEMENT MODE POWER MOSFET
BVDSS
RDS(ON)
ID
60V
90m
3A
Description
The GTT2610 utilized advanced processing techniques to achieve the lowest possible on-resistance,
extremely efficient and cost-effectiveness device.
The GTT2610 is universally used for all commercial-industrial applications.
Features
*Simple Drive Requirement
*Small Package Outline
Package Dimensions
REF.
A
A1
A2
c
D
E
E1
Absolute Maximum Ratings
Parameter
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current3, [email protected]
3
Continuous Drain Current , [email protected]
Pulsed Drain Current1,2
Power Dissipation
Linear Derating Factor
Operating Junction and Storage Temperature Range
Thermal Data
Parameter
Thermal Resistance Junction-ambient3 Max.
GTT2610
Symbol
VDS
VGS
ID @TA=25
ID @TA=70
IDM
PD @TA=25
Millimeter
Min.
Max.
1.10 MAX.
0
0.10
0.70
1.00
0.12 REF.
2.70
3.10
2.60
3.00
1.40
1.80
REF.
L
L1
b
e
e1
Millimeter
Min.
Max.
0.45 REF.
0.60 REF.
0°
10°
0.30
0.50
0.95 REF.
1.90 REF.
Unit
V
V
A
A
A
W
W/
Tj, Tstg
Ratings
60
±20
3.0
2.3
10
2
0.016
-55 ~ +150
Symbol
Rthj-a
Ratings
62.5
Unit
/W
Page: 1/4
ISSUED DATE :2006/06/13
REVISED DATE :
Electrical Characteristics (Tj = 25
Parameter
unless otherwise specified)
Symbol
Min.
Typ.
Max.
Unit
Drain-Source Breakdown Voltage
BVDSS
60
-
-
V
Breakdown Voltage Temperature Coefficient
BVDSS / Tj
-
0.05
-
Gate Threshold Voltage
VGS(th)
1.0
-
3.0
V
VDS=VGS, ID=250uA
gfs
-
5.0
-
S
VDS=5V, ID=3A
IGSS
-
-
±100
nA
VGS= ±20V
-
-
10
uA
VDS=60V, VGS=0
-
-
25
uA
VDS=48V, VGS=0
-
-
90
-
-
120
Forward Transconductance
Gate-Source Leakage Current
Drain-Source Leakage Current(Tj=25 )
Drain-Source Leakage Current(Tj=70 )
Static Drain-Source On-Resistance
IDSS
RDS(ON)
V/
m
Test Conditions
VGS=0, ID=250uA
Reference to 25 , ID=1mA
VGS=10V, ID=3A
VGS=4.5V, ID=2A
Total Gate Charge2
Qg
-
6
10
Gate-Source Charge
Qgs
-
1.6
-
Gate-Drain (“Miller”) Change
Qgd
-
3
-
Td(on)
-
6
-
Tr
-
5
-
Td(off)
-
16
-
Tf
-
3
-
Input Capacitance
Ciss
-
490
780
Output Capacitance
Coss
-
55
-
Reverse Transfer Capacitance
Crss
-
40
-
Symbol
Min.
Typ.
Max.
Unit
VSD
-
-
1.2
V
IS=1.2A, VGS=0V
Reverse Recovery Time
Trr
-
25
-
ns
Reverse Recovery Charge
Qrr
-
26
-
nC
IS=3A, VGS=0V
dI/dt=100A/ s
Turn-on Delay Time2
Rise Time
Turn-off Delay Time
Fall Time
nC
ID=3A
VDS=48V
VGS=4.5V
ns
VDS=30V
ID=1A
VGS=10V
RG=3.3
RD=30
pF
VGS=0V
VDS=25V
f=1.0MHz
Source-Drain Diode
Parameter
2
Forward On Voltage
Test Conditions
Notes: 1. Pulse width limited by Max. junction temperature.
2. Pulse width 300us, duty cycle 2%.
3. Surface mounted on 1 in2 copper pad of FR4 board;156 /W when mounted on min. copper pad.
GTT2610
Page: 2/4
ISSUED DATE :2006/06/13
REVISED DATE :
Characteristics Curve
Fig 1. Typical Output Characteristics
Fig 3. On-Resistance v.s. Gate Voltage
Fig 5. Forward Characteristics of
Reverse Diode
GTT2610
Fig 2. Typical Output Characteristics
Fig 4. Normalized On-Resistance
v.s. Junction Temperature
Fig 6. Gate Threshold Voltage v.s.
Junction Temperature
Page: 3/4
ISSUED DATE :2006/06/13
REVISED DATE :
Fig 7. Gate Charge Characteristics
Fig 8. Typical Capacitance Characteristics
156
Fig 9. Maximum Safe Operating Area
Fig 11. Switching Time Waveform
/W
Fig 10. Effective Transient Thermal Impedance
Fig 12. Gate Charge Waveform
Important Notice:
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM.
GTM reserves the right to make changes to its products without notice.
GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems.
GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C.
TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785
China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China
TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165
GTT2610
Page: 4/4