RESISTANCE WELD SMD CRYSTAL MODEL: HC49SSD FEATURES OPTIONS • Stock Standard • Fundamental to 50 MHz • Tape and Reel (1,000 pcs. STD) • Tolerances to < 10 PPM • Stabilities to < 5 PPM • Temperatures to -40ºC ~ +105ºC DISCONTINUED • PART NUMB Part Number 280-Frequency-xxxxx Model Number HC49SSD 3.200 ~ 70.000 • STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25ºC Frequency Stability, ref @ 25ºC Over Operating Temp Range Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (Co) Load Capacitance (CL) 2 Learn more about: Part Marking Identification Tape and Reel Specification Internet required 1 MAX (unless otherwise noted) 3.200 ~ 70.000 MHz ±50 PPM 1,2 Drive Level Aging per year ±50 PPM 1 -20ºC ~ +70ºC 1 -40ºC ~ +85ºC 7pF 10 pF ~ Series (Customer Specified) 0.5 mW ±5 PPM 1 Other tolerances, stabilities & operating temperature ranges available. Consult Fox Customer Service for specific requirements. 2 Crystal has a ±30ppm tolerance specification for all standard part numbers. These part numbers are listed in the Fox catalog on the Standard Crystal table. All specifications subject to change without notice. Rev. 3/9/05 Frequency Range (MHz) 3.200 ~ 3.500 3.500+ ~ 4.000 4.000+ ~ 5.000 5.000+ ~ 6.000 6.000+ ~ 7.000 7.000+ ~ 9.000 9.000+ ~ 13.000 13.000+ ~ 20.000 20.000+ ~ 50.000 27.000 ~ 70.000 Operating Mode Max ESR Ω Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 3rd OT 300 200 150 120 100 80 60 40 30 100 All dimensions are in millimeters. 8 FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239) 693.0099 FAX +1 (239) 693.1554 http://www.foxonline.com EMEA Munich, Germany +49 0 89.90936870 FAX +49 0 89.90936776 | Asia Hong Kong +852.2854.4285 FAX +852.2854.4282 © 2005 FOX ELECTRONICS