PC307 Ultraminiature PCB Telecom Relay FEATURES Ultraminiature design PC Terminals on .1 in. grid pattern Contact capacity from 1 mA to 1A Meets FCC part 68 voltage surge Class "B" insulation standard High sensitivity, 150 mW nominal power Sealed, immersion cleanable File # E86876 CONTACT DATA UL/CSA RATINGS 1 Form C SPDT Contact Form 0.5A @ 125VAC; 1A @ 30 VDC Rated Load Max. Switching Current 1 Amp Max. Switching Voltage 125 VAC / 60 VDC Material Ag (Fine Silver) Ag + Au (Fine Silver Gold Clad) Initial Contact Resistance 100 milliohms max @ 0.1A, 6VDC Service Life 6 Mechanical 5 X 10 Operations Electrical 1 X 10 5 Operations 2 Amps Max. Continuous Current Max. Switching Power 62.5 VA / 30 W Minimum Load 1 mA @ 5 VDC CHARACTERISTICS Operate Time 5 ms. Max. Release Time Dielectric Strength 5 ms. Max. 1,000 megohms min, at 500VDC, 50%RH between coil and contacts 1,000 megohms min, at 500VDC, 50%RH between open contacts 1000 Vrms, 1 min. between coil and contacts 400 Vrms, 1 min. between open contacts Surge Resistance 1500 V, between coil and contacts (FCC Part 68) Insulation Resistance Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 3.3 mm, 10 - 55 Hz Power Consumption 0.15 W Ambient Temperature Range -40 to 70 C operating and storage Weight 2.2 grams approx. ORDERING INFORMATION Example: PC307 -12 G -X Model Coil Voltage Contact Material A: Fine Silver, G: Fine Silver Gold Clad RoHS Compliant Nil: Not Rohs, -X: RoHS Compliant 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PC307 Rev D 3-21-05 PAGE 1 PC307 PC307 COIL DATA Coil Voltage Resistance _ 10% ohms + Must Operate Voltage Max. Must Release Voltage Min. Continuous Voltage Max. (VDC) (VDC) (VDC) 3 60 2.4 0.3 3.3 5 167 4.0 0.5 5.5 6 240 4.8 0.6 6.6 9 540 7.2 0.9 9.9 12 960 9.6 1.2 13.2 18 2160 14.4 24 3840 19.2 Note: Custom coil voltages within the ranges shown are available on special order. 1.8 19.8 2.4 26.4 Dimensions in Inches (millimeters) Drawings are 2X actual size Side View End View .492 (12.5) .295 (7.5) Bottom View PC Board Layout .30 (7.62) .394 (10.0) Wiring Diagram .10 (2.54) .20 ( 5.08) .040 Dia. Typ. (1.0) .138 (3.5) Notes: Tolerances + .010 unless otherwise noted 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2