Vertical Cavity Surface Emitting Laser in TO-46 Package Features • • • • • • • • • 850nm VCSEL Technology Data rates up to 2.5 Gbps High thermal stability Low drive current/high output density Narrow and concentric beam angle Recommended for multimode fiber applications TO-46 package with microbead lens Burned in for communication level reliability Monitor photodiode Description Absolute Maximum Ratings (TA = 25° C unless otherwise noted) The OPV315 is a high performance 850nm VCSEL packaged for high speed communication links. OPV315 combines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of optical power. The OPV315Y is identical electrically and optically and differs only in pin out. Refer to mechanical drawings for details. Storage Temperature Operating Temperature Soldering Lead Temperature -40° C to +100° C 0° C to +70° C 260° C for 10 Seconds Maximum Forward Peak Current 20 mA Maximum Reverse Voltage 10 V 750 µW 500 µW Max. Continuous Optical Power @ 70°C 85°C Features including high speed, high output power and concentric beam makes it an ideal transmitter for integration into all types of data communications equipment. Applications include: ♦ ♦ ♦ ♦ ♦ ♦ Fibre Channel Gigabit Ethernet ATM VSR Intra-system links Optical backplane interconnects. Additional laser safety information can be found on the Optek website. See application #221. Classification is not marked on the device due to space limitations. See package outline for centerline of optical radiance. Operating devices beyond maximum rating may cause devices to exceed rated classification September 2003 Issue 2.3 Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 Page 1 of 4 [email protected] www.optekinc.com OPV315, OPV315Y Technical Data Electrical/Optical Characteristics (at 25 C unless otherwise specified) SYMBOL PARAMETER MIN POT Total Power Out 0.75 ITH Threshold Current 0.80 VF Forward Voltage 1.60 IR Reverse Current RS Series Resistance η Slope Efficiency 0.10 Linearity 0.00 Wavelength 840 λ ∆λ TYP MAX 20 UNITS TEST CONDITION mW IF = 7 mA 3.00 mA Note1 2.20 V IF = 7 mA 35 nA VR = 5 V 55 ohms Note 2 mW/mA Note 3 Note 4 850 Optical Bandwidth 860 nm 0.85 nm tr Rise Time 90 ps 20% to 80% tf Fall Time 120 ps 80% to 20% Relative Intensity Noise -123 db/Hz ∆lTH/∆T Temp Coefficient of Threshold Current ±1.0 mA ∆λ/∆T Temp Coefficient of Wavelength 0.06 %/°C 0° - 70° C, IF = 7 mA ∆VF∆T Temperature Coefficient for VF -2.5 mV/°C 0° - 70° C, IF = 7 mA ∆η/∆T Temperature Coefficient for Efficiency -0.5 %/C NRI SYMBOL PARAMETER MIN TYP 0° - 70° C, Note 1 0° - 70° C, Note 3 MAX UNITS TEST CONDITION 30 nA VR = 5 V IRPD Reverse Current, photo diode IM1 Monitor Current 30 µA IF = 7 mA, VR = 5 V IM2 Monitor Current 40 µA PO = 2 mW, VR = 5 V Photodiode Electrical Characteristics (at 25 C unless otherwise specified) NOTES: (1) (2) (3) (4) Threshold Current is based on the two line intersection method specified in Telcordia GR-468-Core. Line 1 from 4 mA to 6 mA. Line 2 from 0 mA to 1 mA. Series Resistance is the slope of the Voltage-Current line from 5 to 8 mA. Slope efficiency, is the slope of the best fit LI line from 5 mA to 8 mA using no larger than .25 mA test interval points. Using data points taken for slope efficiency above, delta L/delta I shall be calculated for each adjacent pair of points. Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 Page 2 of 4 [email protected] September 2003 Issue 2.3 www.optekinc.com OPV315, OPV315Y Technical Data Normalized Output Power (7mA, 25 Normalized Output Power vs. Forward Current Forward Current (mA) Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 Page 3 of 4 [email protected] September 2003 Issue 2.3 www.optekinc.com OPV315, OPV315Y Technical Data Invisible Light emits from this surface 1) Tolerances are ±0.005 unless otherwise specified 2) Dimensions in inches [mm] OPV315 OPV315Y Pin Connection Pin Connection 1 VCSEL Anode 1 VCSEL Cathode 2 VCSEL Cathode/PD Anode 2 VCSEL Anode/PD Cathode 3 PD Cathode 3 PD Anode Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 Page 4 of 4 [email protected] September 2003 Issue 2.3 www.optekinc.com