FAIRCHILD KSR2102

KSR2102
KSR2102
Switching Application (Bias Resistor Built In)
• Switching circuit, Inverter, Interface circuit, Driver Circuit
• Built in bias Resistor (R1=10KΩ, R2=10KΩ)
• Complement to KSR1102
2
1 SOT-23
1. Base 2. Emitter 3. Collector
Equivalent Circuit
C
Marking
R5 2
R1
B
R2
PNP Epitaxial Silicon Transistor
E
Absolute Maximum Ratings Ta=25°C unless otherwise noted
Symbol
Parameter
Value
Units
VCBO
Collector-Base Voltage
-50
V
VCEO
Collector-Emitter Voltage
-50
V
VEBO
Emitter-Base Voltage
-10
V
IC
Collector Current
-100
mA
PC
Collector Dissipation
200
TJ
Junction Temperature
150
mW
°C
TSTG
Storage Temperature
-55 ~ 150
°C
Electrical Characteristics Ta=25°C unless otherwise noted
Symbol
Parameter
Test Condition
Min.
Typ.
Max.
Units
BVCBO
Collector-Base Breakdown Voltage
IC= -10µA, IE=0
-50
BVCEO
Collector-Emitter Breakdown Voltage
IC= -100µA, IB=0
-50
ICBO
Collector Cutoff Current
VCB= -40V, IE=0
hFE
DC Current Gain
VCE= -5V, IC= -5mA
VCE(sat)
Collector-Emitter Saturation Voltage
IC= -10mA, IB= -0.5mA
fT
Current Gain Bandwidth Product
VCE= -5mA, IC= -10V
200
MHz
Cob
Output Capacitance
VCB= -10V, IE=0
f=1.0MHz
5.5
pF
-0.1
V
µA
30
-0.3
VI(off)
Input Off Voltage
VCE= -5V, IC= -100µA
VI(on)
Input On Voltage
VCE= -0.3V, IC= -10mA
R1
Input Resistor
7
R1/R2
Resistor Ratio
0.9
©2000 Fairchild Semiconductor International
V
-0.5
V
V
-3
V
10
13
KΩ
1
1.1
Rev. A, February 2000
KSR2102
Typical Characteristics
-100
1000
VCE = - 0.3V
R1 = 10 K
R2 = 10 K
VI(on)[V], INPUT VOLTAGE
hFE, DC CURRENT GAIN
VCE = - 5V
R1 = 10 K
R2 = 10 K
100
-10
-100
-1
-0.1
-0.1
10
-1
-10
-1000
-1
IC[mA], COLLECTOR CURRENT
-10
-100
IC[mA], COLLECTOR CURRENT
Figure 1. DC current Gain
Figure 2. Input On Voltage
-1000
240
PC[mW], POWER DISSIPATION
IC [µ A], COLLECTOR CURRENT
280
VCE = - 5V
R1 = 10 K
R2 = 10 K
-100
-10
-0.0
200
160
120
80
40
0
-0.4
-0.8
-1.2
-1.6
-2.0
V I(OFF)[V], INPUT OFF VOLTAGE
Figure 3. Input Off Voltage
©2000 Fairchild Semiconductor International
-2.4
0
25
50
75
100
125
150
175
o
Ta[ C], AMBIENT TEMPERATURE
Figure 4. Power Derating
Rev. A, February 2000
KSR2102
Package Demensions
±0.10
±0.10
2.40
0.40 ±0.03
1.30
0.45~0.60
0.20 MIN
SOT-23
0.03~0.10
0.38 REF
0.40 ±0.03
+0.05
0.12 –0.023
0.96~1.14
0.97REF
2.90 ±0.10
0.95 ±0.03 0.95 ±0.03
1.90 ±0.03
0.508REF
Dimensions in Millimeters
©2000 Fairchild Semiconductor International
Rev. A, February 2000
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
E2CMOS™
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench®
QFET™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
INTERNATIONAL.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In
Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
©2000 Fairchild Semiconductor International
Rev. E