114MHz SAW Filter 4MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT11404 www. sipatsaw.com Features For IF SAW filter Single-ended operation Ceramic Surface Mount Package Small size RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz - 114 - Insertion Loss dB - 10 11.5 1 dB Bandwidth MHz 3 3.5 - 3 dB Bandwidth MHz 4 4.26 - 40 dB Bandwidth MHz - 6.84 9 Passband Variation(f0±1.5MHz) dB - 0.5 - Group Delay Variation(f0±1.5MHz) nsec - 70 100 Phase Linearity(f0±1.5MHz) deg - 4 5 Absolute Delay usec - 1.27 - f0-4.5MHz dB 40 44 - f0+4.5MHz dB 40 42 - Ultimate Rejection Material Temperature coefficient KHz/°C -2.05 Substrate Material - 112LT Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A SMD13.3*6.5A Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBT11404 Rev. Date 2008-04-28 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 114MHz SAW Filter 4MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT11404 www. sipatsaw.com Matching Configuration L1 INPUT 50Ω L1=(180+18)nH L2 OUTPUT 50Ω L2=(180+12)nH C1=C2=47pF Source/Load Impedance=50 ohm C2 C1 Notes - Component values may change depending on board layout. Package Dimension +0.2 13.3-0.1 SIPAT LBT11404 XXYYZZ +0.2 6.5-0.1 Pad Configuration: Input 10 Output 5 Ground All Others Marking Configuration: 1) •: Pad Number 1 Index 2) SIPAT: Manufacturer Name 0.76 1.56 0.1 0.4 4) XXYYZZ: Date Code 2.9 1.02 3) LBT11404: Part Number 0.6 1.91 Package: SMD13.3*6.5A Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBT11404 Rev. Date 2008-04-28 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 114MHz SAW Filter 4MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT11404 www. sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance 0.0283 -8.4717 -9.9717 -8.9717 -19.9717 -9.4717 -29.9717 -10.4717 -49.9717 -10.9717 -59.9717 -11.4717 -69.9717 -11.9717 -79.9717 104 106 108 110 112 114 Frequency(MHz) 116 118 Horizontal: 2MHz/Div 120 122 124 110 Vertical: 10dB/Div 111 112 113 114 115 Horizontal: 1MHz/Div Group Delay Variation(f0±1.5MHz) 116 117 118 Vertical: 0.5dB/Div Phase Linearity(f0±1.5MHz) Type Performance Type Performance 1450 10 8 1400 6 1350 4 1300 X: 115.5 Y: 2.039 X: 114 Y: 1280 X: 112.5 Y: 1272 2 X: 115.5 Y: 1237 1250 Degree(deg) Group Delay Time(ns) 1200 X: 114 Y: 0.5372 0 X: 112.5 Y: -1.121 -2 -4 1150 -6 1100 -8 1050 -10 113 114 Frequency(MHz) 115 Horizontal: 1MHz/Div 116 117 -12 110 118 Vertical: 50ns/Div 111 112 113 +j2.0 +j5.0 0.0 0.5 ∞ -j5.0 -j0.2 +j2.0 +j0.2 0.2 5.0 2.0 1.0 118 Vertical: 2deg/Div +j0.5 +j5.0 +j0.2 0.5 117 +j1.0 +j0.5 ∞ -j5.0 -j0.2 -j2.0 -j2.0 -j0.5 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 116 Smith Chart S22 +j1.0 -j0.5 115 Horizontal: 1MHz/Div Smith Chart S11 0.0 114 Frequency(MHz) 5.0 112 2.0 111 1.0 1000 110 0.2 Magnitude(dB) -9.9717 -39.9717 Part Number LBT11404 Rev. Date 2008-04-28 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3