PK MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS PK SERIES 85℃ Miniaturized ◆FEATURES • Load life : 85℃ 2000 hours. • RoHS compliance. PK PX 105℃ Version ◆SPECIFICATIONS Characteristics Items Category Temperature Range −40∼+85℃ −25∼+85℃ Rated Voltage Range 6.3∼400V.DC 450V.DC Capacitance Tolerance ±20%(20℃, 120Hz) 6.3∼100V.DC 160∼450V.DC CV≦1000 I=0.01CV or 3μA whichever is greater. (After 2 minutes application of rated voltage) Leakage Current(MAX) CV>1000 I=0.1CV+40μA (1minute) I=0.04CV+100μA (1minute) I=0.03CV+15μA (5minutes) I=0.02CV+25μA (5minutes) I=Leakage Current(μA) C=Rated Capacitance(μF) V=Rated Voltage(V) Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 (V) tanδ 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.10 0.20 0.20 0.20 0.25 0.25 0.25 Dissipation Factor(MAX) (tanδ) (20℃, 120Hz) When rated capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. After applying rated voltage with rated ripple current for 2000hrs at 85℃, the capacitors shall meet the following requirements. Capacitance Change Within ±25% of the initial value. Dissipation Factor Not more than 200% of the specified value. Leakage Current Not more than the specified value. Endurance Rated Voltage (V) Z(−25℃)/Z(20℃) Low Temperature Stability Impedance Ratio(MAX) Z(−40℃)/Z(20℃) 6.3 10 16 25 35 50 63 5 4 3 2 2 2 2 2 3 3 4 5 5 7 12 10 8 5 4 3 3 3 4 4 8 8 10 − ◆DIMENSIONS ◆MULTIPLIER FOR RIPPLE CURRENT Frequency coefficient Frequency (Hz) 0.47∼1μF 2.2∼4.7μF Coefficient 10∼47μF 100∼1000μF 2200∼33000μF F ±0.5 φd L+α MAX α (120Hz) (mm) SLEEVE φD φd F 100 160 200 250 350 400 450 15MIN φD+0.5MAX 4MIN 6.3 8 10 12.5 0.5 0.6 2.5 3.5 5.0 100V以下 WV≦100:1.5 160V以上 WV≧160:2.0 16 18 60 (50) 120 500 1k 10k≦ 0.50 0.65 0.80 0.80 0.80 1.20 1.20 1.20 1.10 1.05 1.30 1.30 1.30 1.15 1.10 1.50 1.50 1.50 1.20 1.15 0.8 7.5 2.0 ◆PART NUMBER □□□ PK □□□□□ □ □□□ □□ D×L Rated Voltage Series Rated Capacitance Capacitance Tolerance Option Lead Forming Case Size 1.00 1.00 1.00 1.00 1.00 PK MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS ◆STANDARD SIZE, RATED RIPPLE CURRENT Size φD×L(mm), Ripple Current (mA r.m.s./85℃, 120Hz) WV(V.DC) Cap(μF) 6.3 (0J) Size 10 (1A) Ripple Size 16 (1C) Ripple Size 25 (1E) Ripple Size 35 (1V) Ripple Size 50 (1H) Ripple 100 220 330 680 1000 6.3×11 8×11.5 8×11.5 290 10×12.5 435 10×16 490 8×11.5 410 10×12.5 500 10×16 590 10×20 710 8×11.5 460 8×11.5 550 10×12.5 680 10×20 760 12.5×20 900 1000 12.5×25 1200 1350 1350 460 8×11.5 580 8×11.5 620 10×12.5 780 10×16 910 12.5×20 590 8×11.5 660 10×12.5 720 10×16 870 10×20 1180 12.5×25 1320 12.5×20 1500 16×25 1810 16×31.5 1980 18×31.5 1800 1990 18×31.5 2100 18×40 920 10×16 1090 3300 10×20 1200 10×20 1440 12.5×20 1600 16×25 2000 16×25 4700 12.5×20 1550 12.5×20 1680 12.5×25 2050 16×25 2120 16×35.5 2500 6800 12.5×25 1920 12.5×25 2150 16×25 2250 16×31.5 2440 18×35.5 2740 10000 16×25 2370 2270 16×31.5 2660 18×35.5 2900 15000 16×31.5 2550 16×35.5 2880 18×35.5 2950 22000 16×35.5 2900 18×35.5 3100 33000 18×40 16×25 10×20 18×40 16×25 2600 2800 3400 100 (2A) Size 270 Ripple 370 10×16 Cap(μF) 8×11.5 Size 8×11.5 2200 WV(V.DC) Ripple 360 6.3×11 470 Size 63 (1J) 160 (2C) Ripple Size 200 (2D) Ripple Size 250 (2E) Ripple Size 350 (2V) Ripple Size 400 (2G) Ripple Size 450 (2W) Ripple Size Ripple 0.47 6.3×11 8 1 6.3×11 16 2.2 6.3×11 6.3×11 8×11.5 8×11.5 31 8×11.5 29 6.3×11 45 8×11.5 45 8×11.5 48 8×11.5 33 51 6.3×11 54 8×11.5 55 10×12.5 56 10×12.5 46 90 10×16 90 10×20 84 3.3 4.7 30 85 10×12.5 90 10 8×11.5 80 10×16 22 10×12.5 130 10×16 150 10×16 150 12.5×20 185 12.5×20 200 12.5×25 140 10×20 205 12.5×25 240 12.5×25 240 16×25 180 33 8×11.5 185 10×16 180 10×20 205 47 8×11.5 220 10×20 230 10×20 220 12.5×20 260 16×25 300 16×25 250 16×31.5 220 320 16×25 450 18×31.5 520 18×35.5 420 18×40 280 18×35.5 680 100 10×16 220 12.5×20 610 16×31.5 645 16×31.5 540 330 12.5×25 760 16×35.5 700 18×35.5 800 470 16×25 1000 680 16×31.5 1100 1000 18×31.5 1200 380 12.5×25 18×40 Please use YK series about Low capacitance. 430 12.5×25 1200