SLDA-61S13-XX Series Multielement Array Features • • • • 1.12 Diodes spaced on 1.3 mm centers Common cathode Solderable anode contacts on top surface Up to 16 elements per monolithic array 0.91 1.32 (0.052") 0.89 Description The Silonex SLDA-61S13-XX series of photodiode arrays are monolithic devices that can be used in precision position sensing applications. The array can be easily bonded with conductive epoxy to a ceramic or other substrate. The conductive epoxy provides the electrical connection to the common cathode contact. 3.38 typ. 3.18 Active Area (2.08 sq.mm. or 0.00322 sq.in.) Dimensions in mm. Tolerance +/- 0.025 mm. unless otherwise noted. Absolute Maximum Ratings Storage Temperature Operating Temperature Soldering Temperature -40 to +125°C -40 to +125°C 260°C for 2 sec To order this part the ‘XX’ refers to the number of elements in the array (from 02 to 16 elements). Electrical Characteristics (per element, TA=25°C unless otherwise noted) Symbol Parameter MIN TYP MAX UNITS TEST CONDITIONS 2 ISC Short Circuit Current 70 100 V = 0V, Ee = 25 mW/cm (1) µA R 2 VOC Open Circuit Voltage 0.40 V Ee = 25 mW/cm (1) ID Dark Current 3 µA Ee = 0, VR = 1V VBR Breakdown Voltage 20 V IR = 100 µA TCI Temp. Coef., ISC +0.2 %/°C (1) CJ Junction Capacitance 150 pF F = 1 Mhz, VR = 0 Maximum Sensitivity Wavelength 930 nm λP Sensitivity Spectral Range 400 1100 nm λR Specifications subject to change without notice. Note: (1) Ee = light source @ 2854 °K 5200 St. Patrick St., Montreal Que., H4E 4N9, Canada Tel: 514-768-8000 Fax: 514-768-8889 QF-84 103076 REV 1 The Old Railway, Princes Street Ulverston, Cumbria, LA12 7NQ, UK Tel: 01 229 581 551 Fax: 01 229 581 554