MB145 SCHOTTKY DIE SPECIFICATION Revision 4 5/22/2000 General Description Low Ir 45V 1A Single Anode ELECTRICAL CHARACTERISTICS DC Blocking Voltage: Ir = 0.05 mA Average Rectified Forward Current Maximum Instantaneous Forward Voltage @ 1 Amperes, 25 0 @ 2 Amperes, 25 0 SYM Spec. Limit Die Sort VRRM IFAV 45 1 47.5 Volt Amp VFMAX 0.52 0.51 Volt VFMAX 0.7 0.69 Volt IRMAX 0.05 Cj MAX 80 pF 40 AMP 0 C 0 C UNIT Maximum Instantaneous Reverse Voltage VR = 45 Volt, Tc = 250 Maximum Junction Capacitance at 0V, 1MHz 0.04 mA MAXIMUM RATINGS Nonrepetitive Peak Surge Curren IFSM Operating Juntion Temperatur TJ Storage Temperature TSTG DIM -65 to +125 -65 to +12 um mil Ax Ay Die Size 1000 1000 39.3 39.3 Bx By Top Metal pad size 860 860 33.8 33.8 Cx Cy Passivation Seal 963 37.9 Thickness (Min) 963 228 37.9 9.0 Thickness (Max) 254 10.0 D ITEM SCRIBE INSTRUCTION: Die performance is assured providing the die separation process leaves the Passivation Seal free of any visible damage. This die is designed to meet the following specifications: 10BQ040, B140HB Please refer to FabTech SBR-Series Ordering Guide to create a complete part numbers for ordering. Complete part number will specify metalization and delivery options. Specifications apply to die only. Actual performance may degrade when assembled. FabTech does not guarantee device performance after assembly. Datasheet Information is subject to change without notice. 777 N.W. Blue Parkway, Suite 350 • Lee's Summit, MO 64086-5709 • TEL (816) 251-8800 • FAX (816) 251-8850 S5627