SPC-1601-25 SURFACE MOUNT 2-WAY SPLITTER Features • • • • • Frequency Range 1200 – 1600 MHz Low Cost Industry Standard SMT package Available in Tape-and -Reel 50 Ohms Characteristic Impedance Description The SPC-1601-25 is a 0° In-phase two way power splitter designed for applications that require small, low cost and highly reliable surface mount components. Applications may be found in broadband, wireless and other communications systems. S-Parameters are available on request. Specifications Parameter Absolute Maximum Ratings Minimum Frequency Range (MHz) Typical Maximum Parameter 1600 RF Power +33 dBm Operating Temperature -55 to +100 °C Storage Temperature -55 to +100 °C Re-flow Temperature + 240 °C 1200 Insertion Loss (dB) 0.4 Isolation (dB) 10 1.0 15 Return Loss (dB) 11 9.8 Amplitude Balance (dB) 0.1 0.5 Phase Balance (Degrees) 2.0 5.0 Maximum Note: Typical values represent Mid-band performance @ 25˚. Schematic Package – S10 Pin Functions Function Typical Test Data – Insertion Loss and Amplitude Balance Pin INPUT 3 OUTPUT 1 10 OUTPUT 2 6 GROUND 1,2,4,5,7,8,9 Typical Test Data –Return Loss and Output Isolation Insertion Loss and Am plitude Balance Return Loss and Isolation 0 -3.1 -5 S11 -10 -3.4 S21 dB S22 dB -15 S33 S31 -20 -3.7 S32 -25 -4 -30 1200 1240 1280 1320 1360 1400 1440 1480 1520 1560 1600 1200 1240 1280 1320 1360 1400 1440 1480 1520 1560 1600 Frequency (MHz) Frequency (MHz) Specifications and information on this data sheet are subject to change without notice.. 1860 Hartog Drive, San Jose, California 95131 USA Leffelholzstr. 20, D-90441, Nurnberg, Germany 2/1-2F, No.99 Lane 2535 Gudai Rd, Shanghai, China PC 201100 Tel: 001-408-436-7720 Tel: +49(0)911/9411 233 Tel: (86)21-5416-8648 Fax: 001-408-436-7689 Fax: +49(0)911/9411 198 Fax: (86)21-5416-8753 Email: [email protected] Email: [email protected] Email: [email protected]