SKYWORKS SMV1213-001

DATA SHEET
SMV1211–SMV1215: Hyperabrupt Junction Tuning Varactors
Features
High capacitance ratio, C1 V/C4 V = 5 typ.
Multiple packages SOT-23, SOD-323, SC-70 and SC-79
● Designed for high volume commercial applications
● SPICE models are available
●
●
Description
The SMV1211–SMV1215 series of silicon hyperabrupt junction varactor diodes is designed for use in VCOs with low tuning voltage
operation. This family of varactors is characterized for capacitance
and resistance over temperature. SPICE models are provided.
NEW
Skyworks offers lead (Pb)-free “environmentally
friendly” packaging that is RoHS compliant
(European Parliament for the Restriction of
Hazardous Substances).
Absolute Maximum Ratings
Characteristic
Value
Reverse voltage (VR)
12 V
Forward current (IF)
20 mA
Power dissipation (PD)
250 mW
Storage temperature (TST)
-55 °C to +150 °C
Operating temperature (TOP)
-55 °C to +125 °C
ESD human body model
Class 0
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce potentials
of several kilovolts on the human body or equipment,
which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200057 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 7, 2004
1
DATA SHEET • SMV1211–SMV1215
Single
Single
Single
Common Cathode
Common Cathode
SC-79
SOD-323
SOT-23
SOT-23
SC-70
SMV1212-001
SMV1212-004
SMV1212-074
Marking: AB1
Marking: AB3
Marking: AB3
SMV1213-004
SMV1213-074
Marking: BD3
SMV1211-001
Marking: AA1
SMV1212-079
Marking: Cathode
SMV1212-001LF
Marking: EB1
SMV1213-079
SMV1213-001
Marking: Cathode
Marking: 86
Marking: BD3
SMV1213-079LF
SMV1213-001LF
SMV1213-004LF
Marking: D86
Marking: GD3
Marking: Cathode
SMV1214-001
Marking: VL1
LS = 0.7 nH
SMV1215-011
SMV1215-001
Marking: VM
Marking: VM1
LS = 1.5 nH
LS = 1.5 nH
SMV1215-004
LS = 1.4 nH
LS = 1.4 nH
LF denotes lead (Pb)-free packaging option as an alternative to our standard
tin/lead (Sn/Pb) packaging.
Electrical Specifications at 25 °C
Part
Number
CT @ 1 V
(pF)
CT @ 2.5 V
(pF)
CT @ 4 V
(pF)
CT @ 1 V
CT @ 2.5 V
(Ratio)
CT @ 1 V
CT @ 4 V
(Ratio)
RS @ 4 V
500 MHz
Ω)
(Ω
Q
@4V
50 MHz
Min.
Typ.
Min.
Max.
Typ.
Max.
Typ.
Typ.
Typ.
Min.
SMV1211
95.0
100.0
40.0
65.0
20
25.0
2
5
0.4
80
SMV1212
42.0
50.0
18.0
27.0
9
12.0
2
5
0.8
150
SMV1213
17.0
22.0
8.5
10.5
4
5.5
2
5
1.4
200
SMV1214
14.5
16.0
6.5
7.8
3
4.8
2
5
1.7
300
SMV1215
8.7
9.5
4.3
5.5
2
2.9
2
5
2.8
350
Reverse Voltage VR (IR = 10 µA): 12 V minimum.
Reverse Current IR (VR = 8 V): 20 nA maximum.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
December 7, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200057 Rev. B
DATA SHEET • SMV1211–SMV1215
Typical Performance Data
1000.0
4
SMV1211
3
SMV1215
2
SMV1214
1
SMV1213
RS (Ω)
SMV1213
SMV1214
SMV1215
10.0
SMV1212
1.0
SMV1211
0
0
4.0
2.0
6.0
8.0
0
1
2
3
4
5
Reverse Voltage (V)
Reverse Voltage (V)
Capacitance vs. Reverse Voltage
Series Resistance vs. Reverse Voltage
@ 500 MHz
3
15
2
10
VR = 1 V
Percentage Change (%)
Percentage Change (%)
Capacitance (pF)
SMV1212
100.0
1
0
-1
-2
VR = 4 V
-3
5
0
-5
-10
-15
-40
-20
0
20
40
60
80
-40
-20
0
20
40
60
80
Temperature (˚C)
Temperature (˚C)
Relative Capacitance Change
vs. Temperature
Relative Series Resistance Change
vs. Temperature @ 500 MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200057 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 7, 2004
3
DATA SHEET • SMV1211–SMV1215
Typical Capacitance Values
SPICE Model
SMV1211
SMV1212
SMV1213
SMV1214
SMV1215
VR (V)
CT (pF)
CT (pF)
CT (pF)
CT (pF)
CT (pF)
0.0
162.6
72.4
30.0
26.0
14.8
0.5
122.3
55.3
22.8
19.6
11.3
1.0
98.6
44.9
18.1
15.6
9.1
1.5
80.4
36.9
15.3
12.4
7.5
2.0
64.2
29.9
12.3
9.6
6.0
2.5
48.2
22.9
9.2
6.8
4.5
3.0
34.1
16.3
6.4
4.7
3.1
3.5
24.7
11.8
4.5
3.5
2.3
4.0
19.4
9.3
3.5
2.9
1.9
4.5
16.4
7.9
3.0
2.5
1.7
5.0
14.6
7.0
2.6
2.3
1.5
5.5
13.3
6.4
2.4
2.1
1.4
6.0
12.4
6.0
2.2
2.0
1.3
6.5
11.7
5.7
2.1
1.9
1.3
7.0
11.2
5.5
2.0
1.8
1.2
7.5
10.8
5.3
1.9
1.8
1.2
8.0
10.5
5.1
1.9
1.7
1.2
PORT
P_anode
port = 1
IND
LS
L = LS
RES
RS
R = RS
CAP
CP
C = CP
DIODE
Varactor_Diode
AREA = 1
MODEL = Diode_Model
MODE = nonlinear
PORT
P_Cathode
port = 2
DIODEM
Diode_Model
IS = 1.00e-14
RS = 0
N=1
TT = 0
CJO = CJO
M=M
VJ = VJ
EG = 1.11
XTI = 3
KF =0
AF =1
FC = 0.5
BV = 0
IBV = 1e-3
ISR = 0
NR = 2
IKF = 0
NBV = 1
IBVL = 0
NBVL = 1
TBV1 = 0
TNOM = 27
FFE = 1
Part
Number
CJO
(pF)
VJ
(V)
M
CP
(pF)
RS
Ω)
(Ω
SMV1211
163.00
200
130
9.5
0.4
SMV1212
72.47
110
67
4.5
0.8
SMV1213
28.90
190
105
2.2
1.4
SMV1214
22.74
190
106
1.5
1.7
SMV1215
14.36
190
115
1.1
2.8
1. Values extracted from measured performance.
2. For package inductance (LS) refer to package type.
3. For more details refer to the “Varactor SPICE Models for RF VCO Applications”
Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
December 7, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200057 Rev. B
DATA SHEET • SMV1211–SMV1215
Recommended Solder Reflow Profiles
SnPb Eutectic Assembly
Lead (Pb)-Free Assembly 100% Sn
Average ramp-up rate (TL to TP)
Profile Feature
3 °C/second max.
3 °C/second max.
Preheat
Temperature min. (TSMIN)
Temperature max. (TSMAX)
Time (min. to max.) (ts)
100 °C
150 °C
60–120 seconds
150 °C
200 °C
60–80 seconds
TSMAX to TL
Ramp-up rate
—
3 °C/second max.
Time maintained above:
Temperature (TL)
Time (tL)
183 °C
60–150 seconds
217 °C
60–150 seconds
Peak temperature (TP)
240 +0/-5 °C
250 +0/-5 °C
Time within 5 °C of actual peak temperature (tp)
10–30 seconds
20–40 seconds
Ramp-down rate
6 °C/second max.
6 °C/second max.
Time 25 °C to peak temperature
6 minutes max.
8 minutes max.
All temperatures refer to the topside of the package, measured on the package body surface.
Reference JEDEC J-STD-020B.
tp
TP
Critical Zone
TL to TL
TL
IL
Temperature
TSMAX
TSMIN
ts
Preheat
25 ˚C
t 25 ˚C to Peak
Time
Reference JEDEC J-STD-020
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200057 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 7, 2004
5
DATA SHEET • SMV1211–SMV1215
SOT-23
SC-70
0.110 (2.80 mm) Min.
0.120 (3.04 mm) Max.
0.071 (1.80 mm) Min.
0.087 (2.20 mm) Max.
0.012 (0.30 mm) Min.
0.020 (0.50 mm) Max.
3
0.083 (2.10 mm) Min.
0.104 (2.64 mm) Max.
0.047 (1.20 mm) Min.
0.055 (1.40 mm) Max.
0.010 (0.25 mm) Min.
0.016 (0.40 mm) Max.
0.071 (1.80 mm) Min.
0.094 (2.40 mm) Max.
2
1
3
0.045 (1.15 mm) Min.
0.053 (1.35 mm) Max.
1
0.037 (0.95 mm) Ref.
0.020 (0.51 mm) Ref.
2
0.014 (0.35 mm) Ref.
0.026 (0.65 mm) Ref.
0.076 (1.92 mm) Ref.
0.051 (1.30 mm) Ref.
0.035 (0.89 mm) Min.
0.044 (1.12 mm) Max.
0.003 (0.080 mm) Min.
0.008 (0.20 mm) Max.
0.004 (0.10 mm) Min.
0.007 (0.18 mm) Max.
0.031 (0.80 mm) Min.
0.039 (1.00 mm) Max.
8˚ Max.
0.0005 (0.01 mm) Min.
0.004 (0.10 mm) Max.
0.022 (0.55 mm) Ref.
SOD-323
0.004 (0.10 mm) Min.
0.012 (0.30 mm) Max.
0.000 (0.00 mm) Min.
0.004 (0.10 mm) Max.
SC-79
0.090 (2.30 mm) Min.
0.108 (2.74 mm) Max.
0.045 (1.15 mm) Min.
0.053 (1.35 mm) Max.
1
2
Cathode
Indicator
Cathode
Indicator
0.010
(0.25 mm) Min.
0.016
(0.40 mm) Max.
0.010
(0.25 mm) Min.
0.014
(0.35 mm) Max.
0.028
(0.70 mm) Min.
0.035
(0.90 mm) Max.
0.043 (1.10 mm) Min.
0.051 (1.30 mm) Max.
0.050
(1.25 mm) Max.
0.004 (0.10 mm) Max.
0.010 (0.25 mm) Min.
2
0.060 (1.50 mm) Min.
0.067 (1.70 mm) Max.
0.063 (1.60 mm) Min.
0.071 (1.80 mm) Max.
0.008 (0.20 mm) Nom.
0.006
(0.15 mm) Typ.
1
0.006 (0.15 mm) Min.
0.020
(0.50 mm) Min.
0.028
(0.70 mm) Max.
10˚ Max.
0.003
(0.07 mm) Min.
0.008
(0.20 mm) Max.
10˚ Max.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
6
December 7, 2004 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200057 Rev. B
DATA SHEET • SMV1211–SMV1215
Copyright © 2002, 2003, 2004, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be
used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products,
specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts,
incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of
Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions.
THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL
PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.
SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST
PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their
own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.
The following are trademarks of Skyworks Solutions, Inc.: Skyworks™, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this publication are for identification
purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at
www.skyworksinc.com, is incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200057 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 7, 2004
7