PD - 94938 IRG4BC30FDPbF INSULATED GATE BIPOLAR TRANSISTOR WITH ULTRAFAST SOFT RECOVERY DIODE Fast CoPack IGBT Features • Fast: Optimized for medium operating frequencies (1-5 kHz in hard switching, >20 kHz in resonant mode) • Generation 4 IGBT design provides tighter parameter distribution and higher efficiency than Generation 3 • IGBT co-packaged with HEXFREDTM ultrafast, ultra-soft recovery anti-parallel diodes for use in bridge configurations • Industry standard TO-220AB package • Lead-Free Benefits • Generation -4 IGBTs offer highest efficiencies available • IGBTs optimized for specific application conditions • HEXFRED diodes optimized for performance with IGBTs. Minimized recovery characteristics require less/no snubbing • Designed to be a drop-in replacement for equivalent industry-standard Generation 3 IR IGBTs www.irf.com 1 1/12/04 IRG4BC30FDPbF 2 www.irf.com IRG4BC30FDPbF www.irf.com 3 IRG4BC30FDPbF 4 www.irf.com IRG4BC30FDPbF www.irf.com 5 IRG4BC30FDPbF 6 www.irf.com IRG4BC30FDPbF www.irf.com 7 IRG4BC30FDPbF 8 www.irf.com IRG4BC30FDPbF www.irf.com 9 IRG4BC30FDPbF TO-220AB Package Outline Dimensions are shown in millimeters (inches) 10.54 (.415) 10.29 (.405) 2.87 (.113) 2.62 (.103) -B- 3.78 (.149) 3.54 (.139) 4.69 (.185) 4.20 (.165) -A- 1.32 (.052) 1.22 (.048) 6.47 (.255) 6.10 (.240) 4 15.24 (.600) 14.84 (.584) LEAD ASSIGNMENTS 1.15 (.045) MIN 1 2 3 4- DRAIN 14.09 (.555) 13.47 (.530) 4- COLLECTOR 4.06 (.160) 3.55 (.140) 3X 3X LEAD ASSIGNMENTS IGBTs, CoPACK 1 - GATE 2 - DRAIN 1- GATE 1- GATE 3 - SOURCE 2- COLLECTOR 2- DRAIN 3- SOURCE 3- EMITTER 4 - DRAIN HEXFET 1.40 (.055) 1.15 (.045) 0.93 (.037) 0.69 (.027) 0.36 (.014) 3X M B A M 0.55 (.022) 0.46 (.018) 2.92 (.115) 2.64 (.104) 2.54 (.100) 2X NOTES: 1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION : INCH 3 OUTLINE CONFORMS TO JEDEC OUTLINE TO-220AB. 4 HEATSINK & LEAD MEASUREMENTS DO NOT INCLUDE BURRS. TO-220AB Part Marking Information E XAMPL E : T HIS IS AN IR F 1010 LOT CODE 1789 AS S E MB L E D ON WW 19, 1997 IN T H E AS S E MB L Y LINE "C" Note: "P" in assembly line position indicates "Lead-Free" INT E R NAT IONAL R E CT IF IE R L OGO AS S E MB L Y L OT CODE PAR T NU MB E R DAT E CODE YE AR 7 = 1997 WE E K 19 L INE C Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.01/04 10 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/