Revised January 2005 74LCX02 Low Voltage Quad 2-Input NOR Gate with 5V Tolerant Inputs General Description Features The LCX02 contains four 2-input NOR gates. The inputs tolerate voltages up to 7V allowing the interface of 5V systems to 3V systems. ■ 5V tolerant inputs The 74LCX02 is fabricated with advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. ■ 2.3V–3.6V VCC specification provided ■ 5.2 ns tPD max (VCC = 3.3V), 10 µA ICC max ■ Power down high impedance inputs and outputs ■ ±24 mA output drive (VCC = 3.0V) ■ Implements patented noise/EMI reduction circuitry ■ Latch-up performance exceeds 500 mA ■ ESD performance: Human body model > 2000V Machine model > 200V Ordering Code: Order Number Package Package Description Number 74LCX02M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74LCX02SJ M14D Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LCX02MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74LCX02MTCX_NL (Note 1) MTC14 Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Note 1: “_NL” package available in Tape and Reel only. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names Description An , Bn Inputs On Outputs © 2005 Fairchild Semiconductor Corporation ds012409 www.fairchildsemi.com 74LCX02 Low Voltage Quad 2-Input NOR Gate with 5V Tolerant Inputs March 1995 74LCX02 Absolute Maximum Ratings(Note 2) Symbol Parameter Value Conditions VCC Supply Voltage −0.5 to +7.0 VI DC Input Voltage −0.5 to +7.0 VO DC Output Voltage IIK DC Input Diode Current −50 VI < GND IOK DC Output Diode Current −50 VO < GND +50 VO > VCC Units V V −0.5 to VCC + 0.5 Output in HIGH or LOW State (Note 3) V mA mA IO DC Output Source/Sink Current ±50 mA ICC DC Supply Current per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Recommended Operating Conditions (Note 5) Symbol VCC Parameter Supply Voltage Min Max Operating 2.0 3.6 Data Retention 1.5 3.6 VI Input Voltage VO Output Voltage HIGH or LOW State IOH/IOL Output Current VCC = 3.0V − 3.6V ±24 VCC = 2.7V − 3.0V ±12 VCC = 2.3V − 2.7V ±8 TA Free-Air Operating Temperature ∆t/∆V Input Edge Rate, VIN = 0.8V–2.0V, VCC = 3.0V Units V 0 5.5 V 0 VCC V mA −40 85 °C 0 10 ns/V Note 2: The Absolute Maximum Ratings are those beyond which the safety of the device cannot be guaranteed. The device should not be operating at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter VCC Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage IOH = −100µA LOW Level Output Voltage 2.0 0.7 0.8 1.8 2.7 2.2 IOH = −18 mA 3.0 2.4 3.0 2.2 IOL = 100µA V 2.3 − 2.7 IOH = −12 mA Units Max 2.7 − 3.6 VCC - 0.2 V V 2.3 − 3.6 0.2 IOL = 8mA 2.3 0.6 IOL = 12 mA 2.7 0.4 IOL = 16 mA 3.0 0.4 IOL = 24 mA 3.0 0.55 0 ≤ VI ≤ 5.5V 2.3 − 3.6 ±5.0 µA 0 10 µA IOFF Power-Off Leakage Current VI or VO = 5.5V ICC Quiescent Supply Current www.fairchildsemi.com 1.7 2.3 Input Leakage Current Increase in ICC per Input 2.3 − 2.7 2.7 − 3.6 2.3 − 3.6 II ∆ICC Min IOH = -8 mA IOH = −24 mA VOL TA = −40°C to +85°C (V) VI = VCC or GND 2.3 − 3.6 10 3.6V ≤ VI ≤ 5.5V 2.3 − 3.6 ±10 VIH = VCC −0.6V 2.3 − 3.6 500 2 V µA µA TA = −40°C to +85°C, RL = 500 Ω Symbol tPHL Parameter Propagation Delay Time tPLH VCC = 3.3V ± 0.3V, VCC = 2.7V VCC = 2.5V ± 0.2V CL= 50 pF CL = 50 pF CL = 30 pF Min Max Min Max Min 1.5 5.2 1.5 6.0 1.5 6.2 1.5 5.2 1.5 6.0 1.5 6.2 tOSHL Output to Output Skew 1.0 tOSLH (Note 5) 1.0 Units Max ns ns Note 5: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Dynamic Switching Characteristics Symbol VOLP VOLV VCC TA = 25°C (V) Typical CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 0.8 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 0.6 CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 −0.8 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 −0.6 Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL Conditions Units V V Capacitance Typical Units CIN Symbol Input Capacitance Parameter VCC = Open, VI = 0V or VCC Conditions 7 pF COUT Output Capacitance VCC = 3.3V, VI = 0V or VCC 8 pF CPD Power Dissipation Capacitance VCC = 3.3V, VI = 0V or VCC, f = 10 MHz 25 pF 3 www.fairchildsemi.com 74LCX02 AC Electrical Characteristics 74LCX02 AC Loading and Waveforms Generic for LCX Family FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance) Test Switch tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 ± 0.3V VCC x 2 at VCC = 2.5 ± 0.2V tPZH,tPHZ GND Waveform for Inverting and Non-Inverting Functions 3-STATE Output Low Enable and Disable Times for Logic Propagation Delay, Pulse Width and trec Waveforms Setup Time, Hold TIme and Recovery TIme for Logic 3-STATE Output High Enable and Disable TImes for Logic trise and tfall FIGURE 2. Waveforms (Input Pulse Characteristics; f=1MHz, tr=tf=3ns) Symbol www.fairchildsemi.com VCC 3.3V ± 0.3V 2.7V 2.5V ± 0.2V Vmi 1.5V 1.5V VCC/2 Vmo 1.5V 1.5V VCC/2 Vx VOL + 0.3V VOL + 0.3V VOL + 0.15V Vy VOH − 0.3V VOH − 0.3V VOH − 0.15V 4 74LCX02 Schematic Diagram Generic for LCX Family 5 www.fairchildsemi.com 74LCX02 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 6 74LCX02 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D 7 www.fairchildsemi.com 74LCX02 Low Voltage Quad 2-Input NOR Gate with 5V Tolerant Inputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8