C A L I B E R Lead-Free RoHS Compliant Electronics Inc. PART NUMBERING GUIDE OC-3.3 Series 5X7X1.6mm / 3.3V / SMD / HCMOS/TTL Oscillator Environmental/Mechanical Specifications on page F5 OC-3.3- 100 48 A T - 30.000MHz Package OC-3.3 = 5X7X1.6mm / 3.3Vdc / HCMOS-TTL OC-2.5 = 5X7X1.6mm / 2.5Vdc / HCMOS-TTL Pin One Connection T = Tri State Enable High Output Symmetry Blank = 40/60%, A = 45/55% Inclusive Stability 100= +/-100ppm, 50= +/-50ppm, 30= +/-30ppm, 25= +/-25ppm, 20= +/-20ppm, 15= +/-15ppm, 10= ±10ppm (25,20,15,10= 0°C-70°C Only) Operating Temperature Range Blank = -10°C to 70°C, 27 = -20°C to 70°C, 48 = -40°C to 85°C ELECTRICAL SPECIFICATIONS Revision: 1996-G Frequency Range 1.544MHz to 185.000MHz Operating Temperature Range -10°C to 70°C / -20°C to 70°C / -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage 2.5Vdc ±10% or 3.3Vdc ±10% Input Current 1.544MHz to 36.000MHz 36,001MHz to 70.000MHz 70.001MHz to 185.000MHz 10mA Maximum 18mA Maximum 40mA Maximum Frequency Tolerance / Stability Inclusive of Operating Temperature Range, Supply Voltage and Load ±100ppm, ±50ppm, ±30ppm, ±25ppm, ±20ppm, ±15ppm or ±10ppm (25, 20, 15, 10 = 0°C to 70°C ) Output Voltage Logic High (Voh) w/HCMOS or TTL Load 90% of Vdd Min. / Ioh=-8mA Output Voltage Logic Low (Vol) wHCMOS or TTL Load 10% of Vdd Max. / Iol=8mA Rise / Fall Time 10% to 90% of Waveform w/HCMOS Load; 0.4Vdc to 2.4V w/TTL Load / 5nSec Max. Duty Cycle @1.4Vdc w/TTL Load; @50% w/HCMOS Load @1.4Vdc w/TTL Load or w/HCMOS Load 50 ±10% (Standard) 50±5% (Optional) Load Drive Capability 1.544MHz - 36.000MHz 36.0001MHz - 70.000MHz 70.0001MHz - 185.000MHz 10TTL Load or 30pF / HCMOS Load Max. 10TTL Load or 15pF / HCMOS Load Max. 15pF / HCMOS Load Max. Pin 1 Tristate Input Voltage No Connection VIH VIL Enables Output +0.7Vdc Minimum to Enable Output +0.3Vdc Maximum to Disable Output Aging (@ 25°C) ±5ppm / year Maximum Start Up Time 10mSeconds Maximum Stand By Current 10uA Maximum (Disabled Output, High Imp) RMS Phase Jitter 1pSec Maximum / 12kHz to 20.000MHz offset MECHANICAL DIMENSIONS Marking Guide Metal 5.0 Max 1.4 ±0.2 All Dimensions in mm. 4 1 (X4 plcs.) 5.08 ±0.15 7.0 Max 3 Ceramic 2 2.60 ±0.15 1.6 ±0.2 Pin 1: Tri-State Pin 2: Case Ground TEL 949-366-8700 FAX 949-366-8707 Line 1: 3T- Frequency Line 2: CEI YM 3 = 3.3V designator T = Tristate CEI = Caliber Electronics Inc. YM = Date Code (Year / Month) Pin 3: Output Pin 4: Supply Voltage WEB http://www.caliberelectronics.com