SENSITRON SEMICONDUCTOR SHD123611P SHD123611N SHD123611D TECHNICAL DATA DATA SHEET 744, REV. FORMERLY PART NUMBER SHD1235P/N/D HIGH CURRENT HERMETIC SCHOTTKY POWER MODULE DESCRIPTION: A 30 VOLT, 150/120 AMP, POWER SCHOTTKY RECTIFIER IN A POTTED PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 30 Volts O IO 150 Amps O IO 120 Amps IFSM 1000 Amps CT 6600 pF 0.2 C/W Top/Tstg -65 to + 150 C Vf 0.65 Volts PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT @ TC=100 C (COMMON CATHODE & COMMON ANODE) (per leg) MAXIMUM DC OUTPUT CURRENT @ TC=100 C (DOUBLER) (per leg) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (per leg) (Vr =5V) MAXIMUM THERMAL RESISTANCE R MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE JC ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 120 Amps) (per leg) TJ = 25 C TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 30 V PIV) (per leg) TJ = 25 C TJ = 125 C 0.55 Ir 12 600 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-Mail - [email protected] mA SHD123611P SHD123611N SHD123611D TECHNICAL DATA DATA SHEET 744, REV. MECHANICAL DIMENSIONS: IN Inches / mm 1.27 (32.26 1.23 31.24) 0.370 (9.40 0.330 8.38) 0.64 (16.26 0.60 15.24) 0.720 (18.29 0.680 17.27) 1 2 3 0.50(12.70) Min 0.167 (4.24 Dia 0.147 3.73) 0.220 (5.59 0.180 4.57) 3 Places 0.40(10.16) Typ 0.030 (0.762 0.010 0.254) 0.260(6.61) Max Epoxy Shell 0.180 (4.57 0.140 3.55) Heat Sink PKG. 23 PINOUT TABLE DEVICE TYPE DUAL RECTIFIER/COMMON CATHODE (P) DUAL RECTIFIER/COMMON ANODE (N) DUAL RECTIFIER/DOUBLER (D) Note: Vf Curves shown are for die only. PIN 1 ANODE 1 CATHODE 1 ANODE PIN 2 COMMON CATHODE COMMON ANODE ANODE/CATHODE Typical Forward Characteristics Typical Reverse Characteristics Instantaneous Reverse Current - I R (mA) 103 102 150 °C 101 150 °C 125 °C 102 100 °C 1 10 75 °C 100 50 °C 10-1 25 °C 125 °C 0 100 0.0 0.1 0.2 0.3 0.4 0.5 Forward Voltage Drop - V F (V) 10 20 30 Reverse Voltage - VR (V) 40 Typical Junction Capacitance 25 °C 0.6 Junction Capacitance - CT (pF) Instantaneous Forward Current - I F (A) PIN 3 ANODE 2 CATHODE 2 CATHODE 6000 5500 5000 4500 4000 3500 0 10 20 30 Reverse Voltage - VR (V) 40 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-Mail - [email protected] SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •