Tyco/Electronics PRODUCT: RHE750 Raychem Circuit Protection DOCUMENT: SCD 24261 PCN: 446913 REV LETTER: F REV DATE: OCTOBER 8, 2001 PAGE NO.: 1 OF 1 PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 Overcurrent Protection Device Specification Status: RELEASED Electrical Rating Voltage: 16V MAX Current: 100A MAX INSULATING MATERIAL: Cured, Flame Retarded Epoxy Polymer LEAD MATERIAL: 20 AWG Tin/Lead Plated Copper PART MARKING: Raychem Logo and Voltage 16 H7.5 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -14.0 -23.5 -(0.55) -(0.93) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.0 (0.12) F TYP 1.2 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT RATINGS TIME TO TRIP RESISTANCE TRIPPED-STATE POWER DISSIPATION WATTS AT 25°C TYP 4.5 AMPS AMPS AMPS AMPS SECONDS AT OHMS 25°C AT 0°C AT 25°C AT 60°C 25°C, 37.5A AT 25°C HOLD HOLD TRIP HOLD TRIP HOLD TRIP MAX MIN MAX 7.5 --7.5 13.1 --7.0 0.0094 0.022 Recognitions: UL, TUV, CSA recognized. Reference Documents: PS300 Precedence: This specification takes precedence over documents referenced herein. Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.