ISOC0128 Page 1 of 2 These lamps are miniature chip type designed for two-way surface mounting. Mounted normally, these lamps can be used as circuit board status indicators or as backlight for switches or key pads. Mounted at right angles these lamps are miniature through the panel indicators. Chip PART NO. ISOC0128 Lens Color Material Emitted Color GaAsP/GaP Sunset Orange Water Clear * Specifications subject to change without notice. Dimensions are in mm±0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0607 ISOC0128 Page 2 of 2 Absolute Maximum Ratings at Ta = 25 °C Parameter Symbol Rating Units IF 40 mA Operating Temperature Topr -40 to +85 °C Storage Temperature Tstg -40 to +90 °C Soldering Temperature Tsol 260 (for 5 seconds) °C Electrostatic Discharge ESD 2000 V Pd 110 mW IF (Peak) 160 mA VR 5 V Forward Current Power Dissipation Peak Forward Current (Duty 1/10 @ 1KHz) Reverse Voltage Electronic Optical Characteristics Parameter Symbol Min. Typ. Max. Units Condition IV 6.5 10 — mcd IF = 20 mA 2θ1/2 — 60 — deg IF = 20 mA Peak Wavelength λp — 610 — nm IF = 20 mA Dominant Wavelength λd — 604 — nm IF = 20 mA Spectrum Radiation Bandwidth ∆λ — 40 — nm IF = 20 mA Forward Voltage VF 1.7 2.0 2.4 V IF = 20 mA Reverse Current IR — — 10 µA VR = 5 V Luminous Intensity Viewing Angle * Specifications subject to change without notice. Dimensions are in mm±0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0607