“LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS P/N: LU1S515 Page : 1/2 A. General Specifications 1. RJ-45 connector integrated with X’FMER /Impedance resistor/High voltage capacitor 2. Size same as RJ-45 connector to save PCB Board space. 3. Reduce EMI Radiation, Improve EMI performance. 4. Design for 100 BASE transmission over UTP-5 CABLE. 5. Operating temperature range: 0 °C to +70 °C. B. Electrical Specifications@25°C: 1. Turns Ratio (±5%): RX =1CT:1CT & TX=1CT:1CT 2. Primary OCL Inductance : 350 H MIN@100KHz /0.1Vrms with 8.0mA DC Bias 3. CW/W : 28 pF MAX 4. Leakage Inductance(TX &RX): 0.4 H MAX 5. Insertion loss (0.3 to 100 MHz): –1.15 dB Max. 6. Return Loss (dB Min): 30MHz -16 40MHz -14 50MHz 60MHz -13.5 -13 80MHz -10 7. Differential to Common Mode Rejection(dB MIN): -30@ 0.3-100MHz 8. Cross Talk (dB MIN): [email protected] MHz 9. Rise Time (10-90%): 2.5 nS Typ. 10. HI-POT Isolation: 1500 Vrms C. Schematic: Prepared :Luo Ming Li Checked by: Xu Wenbing Approved : Alexander Wu Drawing no.: Pulse Transformer REV.:A6 Date : 2001/08/06 “LAN-MATE” SERIES SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS P/N: LU1S515 Page : 2/2 D. Mechanical: 1. Plastic Material : PBT 15% Glass Filled (UL 94V-0) , Black Housing 2. Metal Shield : Brass C2680-H, 20u Nickle Plated, t=0.25mm 3. Spring Wire : 0.45mm Dia. Phosphor bronze with 6u gold plated . 4. Solder Pin : 0.4x0.4mm ,Phosphor bronze with Solder plated 5. Durability : 300 Mating cycles Min . E. PCB Layout Mounting Hole (Top View) Prepared :Luo Ming Li Checked by: Xu Wenbing Approved : Alexander Wu Drawing no.: Pulse Transformer REV.:A6 Date : 2001/08/06