MA-COM MAAM02350-A2

MAAM02350-A2
Wide Band GaAs MMIC Amplifier
0.2 - 3.0 GHz
Features
•
•
•
•
•
•
•
Rev. V3
Functional Schematic
High Gain: 18 dB
Output Power: +14 dBm
Noise Figure: 4 dB
Single Supply: +6 V
Gain Flatness: ± 0.75 dB
Lead-Free 8-lead Ceramic Package
RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM’s MAAM02350-A2 is a wide band, MMIC
amplifier housed in a small, lead-free, 8-lead
ceramic package. It includes two integrated gain
stages and employs resistive feedback to obtain flat
gain and a good, 50-ohm, input and output
impedance match over a very wide bandwidth. The
MAAM02350-A2 operates from a single +6 V supply.
It is monolithic, requiring only DC blocking capacitors, no other external components are needed.
The MAAM02350-A2 functions well as a generic IF,
driver or buffer amplifier where high gain, low noise
figure, excellent linearity and low power consumption
are important. Because of its wide bandwidth, the
MAAM02350-A2 can be used in numerous
commercial and government system applications,
such as wireless communications, EW and radar.
Pin Configuration1
Pin No.
Function
Pin No.
Function
1
Ground
5
Ground
2
Ground
6
RF Output
3
RF Input
7
Ground
4
Ground
8
VDD
1. The package bottom must be connected to RF and DC
ground.
Absolute Maximum Ratings 2,3
The MAAM02350-A2 is manufactured in-house
using a reliable, 0.5-micron, GaAs MESFET
process. This product is 100% RF tested to ensure
compliance to performance specifications.
Parameter
Absolute Maximum
VDD
+10 V
Input Power
+20 dBm
Current
150 mA
4
Ordering Information
Part Number
Package
MAAM02350-A2
8-Lead Ceramic (CR-3)
MAAM02350-A2G
Gull Wing (CR-10)
Channel Temperature
+150°C
Operating Temperature
-55°C to +100°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. Typical thermal resistance (Θjc) = +80°C/W
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAM02350-A2
Wide Band GaAs MMIC Amplifier
0.2 - 3.0 GHz
Rev. V3
Electrical Specifications: TA = 25°C, VDD = +6 V, Z0 = 50 Ω
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Gain
0.2 - 3.0 GHz, PIN = -30 dBm
dB
16
18
—
Noise Figure
0.2 - 3.0 GHz
dB
—
4.0
4.5
Gain Flatness
0.2 - 3.0 GHz, PIN = -30 dBm
dB
—
± 0.5
—
Input VSWR
0.2 - 3.0 GHz, PIN = -30 dBm
Ratio
—
1.7:1
—
Output VSWR
0.2 - 3.0 GHz, PIN = -30 dBm
Ratio
—
1.3:1
—
Output 1 dB Compression
0.2 - 3.0 GHz
dBm
—
+14
—
Input IP3
0.2 - 3.0 GHz, PIN = -30 dBm
dBm
—
+6
—
Reverse Isolation
0.2 - 3.0 GHz, PIN = -30 dBm
dB
—
30
—
Bias Current
—
mA
—
65
100
Application Schematic
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
Lead-Free CR-3 (MAAM02350-A2)†
†
Lead-Free CR-10 (MAAM02350-A2G)†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAM02350-A2
Wide Band GaAs MMIC Amplifier
0.2 - 3.0 GHz
Rev. V3
Typical Performance @ +25°C
Gain
VSWR
3.5
25
3.0
Input VSWR
Output VSWR
20
2.5
15
2.0
10
1.5
1.0
5
0
1
2
3
4
5
0
1
2
3
4
5
Frequency (GHz)
Frequency (GHz)
Noise Figure
5
4
3
2
1
0
1
2
3
4
5
Frequency (GHz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.