ECL Vishay Roederstein Aluminum Capacitors FEATURES • Polarized aluminum electrolytic capacitors, non solid electrolyte RoHS • Extra low impedance, high ripple current COMPLIANT • Temperature up to 105 °C • RoHS compliant APPLICATIONS • SMD technology, for high mounting density • Industrial and professional applications • General industrial, consumer QUICK REFERENCE DATA DESCRIPTION UNIT VALUE Nominal case size (Ø D x L ) mm 6 x 5.8 to 12.5 x 13.5 Rated capacitance range CR µF 10 to 1500 Capacitance tolerance % ± 20 Rated voltage range V 6.3 to 100 Category temperature range °C - 40 to 105 Load life h 2000 • Smoothing, filtering, buffering PACKAGING • Supplied in blister tape IEC 60384-4/ EN 130300 Based on sectional specification Climatic category IEC 60068 40/105/56 SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) RATED VOLTAGE (V) CR (µF) 6.3 10 16 25 35 10 → → → → → 6.3 x 5.8 22 → → → → → 6.3 x 5.8 50 33 → → → → 6.3 x 5.8 8 x 6.2 47 → → → → 6.3 x 5.8 8 x 6.2 68 → → 100 → → 220 6.3 x 5.8 330 8 x 6.2 470 680 6.3 x 7.7 → 6.3 x 5.8 8 x 6.2 8 x 10 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 10 x 10 8 x 6.2 8 x 10 → 8 x 10 - - - - → 8 x 10 10 x 10 → 10 x 10 - - - - - - - 1000 10 x 10 - - - - - 1500 10 x 10 - - - - - Document Number: 25020 Revision: 17-Jul-08 For technical questions, contact: [email protected] www.vishay.com 287 ECL Aluminum Capacitors Vishay Roederstein DIMENSIONS in millimeters CASE SIZE CODE D±α L±α A±α B±α C±α E±α R N P AD 6.3 ± 0.5 5.8 ± 0.3 2.4 ± 0.2 6.6 ± 0.2 6.6 ± 0.2 2.2 ± 0.2 0.5 ~ 0.8 0.3 0.5 BM 6.3 ± 0.5 7.7 ± 0.4 2.4 ± 0.2 6.6 ± 0.2 6.6 ± 0.2 2.2 ± 0.2 0.5 ~ 0.8 0.3 0.5 AE 8 ± 0.5 6.2 ± 0.4 3.3 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 2.3 ± 0.2 0.5 ~ 0.8 0.3 0.5 AF 8 ± 0.5 10 ± 0.5 2.9 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 3.1 ± 0.2 0.8 ~ 1.1 0.3 0.5 AG 10 ± 0.5 10 ± 0.5 3.2 ± 0.2 10.3 ± 0.2 10.3 ± 0.2 4.5 ± 0.2 0.8 ~ 1.1 0.3 0.5 AH 12.5 ± 0.5 13.5 ± 0.5 4.6 ± 0.2 12.8 ± 0.2 12.8 ± 0.2 4.5 ± 0.2 1.1 ~ 1.4 0.3 0.5 Capacitance N max. Plastic plateform C±α + Positive P max. A±α E±α A±α Voltage B±α Lot no. ØD±α 22 A 50 + L±α ELECTRICAL DATA SYMBOL R - Negative ORDERING EXAMPLE DESCRIPTION UR rated voltage ECL 22 µF/50 V, ± 20 %, size 6.3 x 5.8 mm CR rated capacitance at 120 Hz Ordering code: MALSECL00AD222HARK tan δ max. dissipation factor at 120 Hz RESR max. equivalent series resistance at 120 Hz IR rated alternating current at 120 Hz and upper catagory temperature Z max. impedance at 100 kHz Note Unless otherwise specified, all electrical values Tamb = 20 °C, P = 86 to 100 kPa, RH = 45 to 75 %. apply For Standard Packaging Quantity (SPQ) and Minimum Order Quantity (MOQ) please refer to our price list or contact customer service. at ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 120 Hz (µF) DIMENSIONS DxL (mm) tan δ 120 Hz Z 100 kHz/ 20 °C (Ω) IR 100 kHz/ 105 °C (mA) WEIGHT (g) CATALOG NUMBER 220 330 1000 1500 220 470 680 100 220 330 470 68 100 220 6.3 x 5.8 8 x 6.2 10 x 10 10 x 10 6.3 x 7.7 8 x 10 10 x 10 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 6.3 x 5.8 8 x 6.2 8 x 10 0.24 0.24 0.24 0.24 0.19 0.19 0.19 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.44 0.26 0.09 0.09 0.34 0.17 0.09 0.44 0.26 0.17 0.09 0.44 0.26 0.17 230 300 670 670 280 450 670 230 300 450 670 230 300 450 0.30 0.55 1.21 1.21 0.40 1.00 1.21 0.30 0.55 1.00 1.21 0.30 0.55 1.00 MALSECL00AD322BARK MALSECL00AE333BARK MALSECL00AG410BARK MALSECL00AG415BARK MALSECL00BM322CARK MALSECL00AF347CARK MALSECL00AG368CARK MALSECL00AD310DARK MALSECL00AE322DARK MALSECL00AF333DARK MALSECL00AG347DARK MALSECL00AD268EARK MALSECL00AE310EARK MALSECL00AF322EARK 6.3 10 16 25 www.vishay.com 288 For technical questions, contact: [email protected] Document Number: 25020 Revision: 17-Jul-08 ECL Aluminum Capacitors Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 120 Hz (µF) DIMENSIONS DxL (mm) tan δ 120 Hz Z 100 kHz/ 20 °C (Ω) IR 100 kHz/ 105 °C (mA) WEIGHT (g) CATALOG NUMBER 33 47 68 100 220 10 22 33 47 68 100 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 6.2 8 x 10 10 x 10 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.44 0.44 0.26 0.17 0.09 0.88 0.88 0.63 0.63 0.34 0.18 230 230 300 450 670 165 165 300 300 450 670 0.30 0.30 0.55 1.00 1.21 0.30 0.30 0.55 0.55 1.00 1.21 MALSECL00AD233FARK MALSECL00AD247FARK MALSECL00AE268FARK MALSECL00AF310FARK MALSECL00AG322FARK MALSECL00AD210HARK MALSECL00AD222HARK MALSECL00AE233HARK MALSECL00AE247HARK MALSECL00AF268HARK MALSECL00AG310HARK 35 50 REFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS tP TP Critical Zone TL to TP Temperature Ramp-up TL tL Ts max. Ts min. Ramp-down ts Preheat t 25 °C to Peak Time PROFILE FEATURE SOLDERING CONDITION Ø 4 ~ Ø 10 Average ramp-up rate (TL to TP) Ø 16 Ø 12.5 3 °C/s max. 3 °C/s max. Preheat Temperature min. (Ts min.) 150 °C 150 °C Temperature max. (Ts max.) 200 °C 200 °C Time (Ts min. to Ts max.) 60 ~ 150 s 40 ~ 100 s 40 ~ 120 s Ts max. to TL Ramp-up rate 3 °C/s max. 3 °C/s max. 217 °C 217 °C 60 ~ 90 s 40 ~ 60 s Time maintained above Temperature (TL) Time (tL) Document Number: 25020 Revision: 17-Jul-08 For technical questions, contact: [email protected] www.vishay.com 289 ECL Aluminum Capacitors Vishay Roederstein PROFILE FEATURE Peak/classification temperature (TP) 250 °C Time within 5 °C of actual peak temperature (TP) 230 °C 240 °C 10 s max. 10 s max. Ramp-down rate 3 °C/s max. 3 °C/s max. Time 25 °C to peak temperature 8 min max. 8 min max. RESISTANCE TO SOLDERING HEAT Less than specified value Leakage current Capacitance value Within ± 10 % of initial value tan δ Less than specified value LOW TEMPERATURE BEHAVIOR (at 120 Hz) IMPEDANCE RATIO (Z) T2/(Z) T1 RATED VOLTAGE (V) T2/T1 6.3 10 16 25 35 50 63 100 - 25 °C/+ 20 °C 2 2 2 2 2 2 3 3 - 40 °C/+ 20 °C 3 3 3 3 3 3 4 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) 50 0.41 120 0.59 300 0.69 1000 0.80 10 000 0.88 100 000 1.00 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Current Leakage current (Test conditions: UR, 20 °C) After 2 min at UR IL2 ≤ 0.01 x CR x UR or 3 µA for UR ≤ 100 V (whichever is greater) Resistance Equivalent series resistance (ESR) Calculated from tan δmax. ESR = tan δ/2 π f CR TEST PROCEDURES AND REQUIREMENTS TEST PROCEDURE (QUICK REFERENCE) REQUIREMENTS Load life Tamb = 105 °C UR and IR applied After 2000 h ΔC/C: ± 25 % of initial value IL ≤ spec. limit tan δ ≤ 2 x spec. limit Shelf life No voltage applied After 1000 h After test: UR to be applied for 30 min 24 to 48 h before measurement ΔC/C: ± 25 % of initial value IL ≤ spec. limit tan δ ≤ 2 x spec. limit www.vishay.com 290 For technical questions, contact: [email protected] Document Number: 25020 Revision: 17-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1