MABACT0018 E-Series 1:4 RF Flux Coupled Transformer 5.0-200 MHz Features • 1:4 Impedance • CT on Secondary • Surface Mount • Available on Tape and Reel. M/A-COM Products Release - Rev. V2 Product Image Description M/A-COM’s MABACT0018 is a 1:4 RF flux coupled step-up transformer in a low cost, surface mount package. Ideally suited for high volume cellular & wireless applications. Typical applications include single to balance mode conversion and impedance matching. Ordering Information Part Number Package MABACT0018 2000 piece reel Schematic Case Style: SM-138-A Pin No. Function 1 Secondary 2 Secondary CT 3 Secondary Dot 4 Primary Dot 5 Primary Dimensions in inches [mm]. Tolerance where not specified: .xx ± .02, .xxx ± .010 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MABACT0018 E-Series 1:4 RF Flux Coupled Transformer 5.0-200 MHz M/A-COM Products Release - Rev. V2 Electrical Specifications: TA = 25°C Parameter Frequency (MHz) Units Typ Min Max Frequency Range 5 - 65 65 - 200 - - - - Insertion Loss 5 - 65 65 - 200 dB dB 0.4 0.9 - 0.7 1.5 Amp Balance 5 - 65 65 - 200 dB dB 0.02 0.20 - 0.1 0.5 Phase Balance 5 - 65 65 - 200 Deg Deg 0.4 2.0 - 2.0 8.0 Input Return Loss 5 - 65 65 - 200 dB dB 22.0 11.0 15.0 7.0 - Absolute Maximum Ratings 1,2 Parameter Absolute Maximum RF Power 50 mW Peak IF Current 200 mA Storage Temperature -40° to +85° C Operating Temperature -40° to +85° C Pin Temp. (10sec) 260°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MABACT0018 E-Series 1:4 RF Flux Coupled Transformer 5.0-200 MHz M/A-COM Products Release - Rev. V2 Deg Typical Performance Curves at +25°C 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.