Pinless Moisture Psychrometer + IR Thermometer 8-in-1 Meter with Memory and Patented Built-in IR Thermometer Monitor moisture in wood and other building materials with virtually no surface damage with the Pinless Moisture sensor (Pin-type Moisture Probe included). Stores up to 20 labeled readings for further analysis. Measure Humidity and Air Temperature with built-in probe plus non-contact InfraRed Temperature with patented IR design. Features: • Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length) •Manually store/recall up to 20 labeled readings • Works on multiple wood types and other building materials • Easy to read, large dual display with automatic backlight feature • Designed with a patented IR circuit to measure non-contact surface temperature; 8:1 distance to spot ratio with 0.95 fixed emissivity • Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point • Automatic calculation of differential Temperature (IR - DP) to determine condensation point • Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity • Fast Analog Bargraph • Pinless measurement depth to 0.75" (19mm) below the surface • Auto power off and low battery indication • Programmable high/low Moisture and Humidity alarms • Min/Max and Data Hold • Complete with pin moisture probe with cable, 9V battery and case Patented Measure moisture of wall material with non-invasive Pinless technology Pin Moisture Probe included for making contact moisture measurements Patented IR thermometer design locates cold spots on walls, which identifies surfaces subject to condensation (direct differential display of IR - DP) Specifications Sensor Type Memory Pinless Moisture Pinless Depth Pin-type Moisture (probe included) Max Resolution Humidity Temperature (Air) Temperature (IR) Vapor Pressure Dew Point Mixing ratio Field of View Emissivity Dimensions Weight Non-Penetrating Manually Store/Recall 20 data readings 0 to 99.9 (Relative) up to 0.75" (19mm) 0 to 99.9% 0.1, 0.1°F/°C 0 to 100%RH -20 to 170°F (-29 to 77°C) -4 to 392°F (-20 to 200°C) 0 to 20.0kPA -22 to 199°F (-30 to 100°C) 0 to 999GPP (0 to 160g/kg) 8:1 Distance to Target ratio 0.95 fixed 6.5x2.8x1.5” (165x70x38) 7.4oz (210g) Ordering Information: MO295............Pinless Moisture Psychrometer w/Memory + IR Thermometer MO290-P........Replacement Pin Moisture Probe www.extech.com 7/7/09 - R1 Specifications subject to change without notice. Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.