V940ME27-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Base Stations • Microwave Links • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5150 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -87 Harmonic Suppression (2nd) -36 Tuning Voltage 0.5 Max Units 5216 MHz dBc/Hz -33 dBc 4.5 Vdc MHz/V 135 Tuning Sensitivity (avg.) 6 dBm Input Capacitance 50 pF Pushing 4 MHz/V Pulling (14 dB Return Loss, Any Phase) 19 MHz 85 °C Max Units Power Output 0 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 3 MINI-14S Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 28 Vdc 34 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V940ME27-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 5500 5450 5400 5350 5300 5250 5200 5150 5100 5050 5000 4950 4900 4850 4800 4750 4700 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 4772 4857 4931 4998 5068 5136 5205 5276 5349 5422 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B