RoHS PCIS60 Power Chip Shielded Inductors Dimensions: Inches (mm) 0.730 MAX. (18.54) 0.300 MAX. (7.62) 0.500 (12.70) 0.600 (15.24) MAX. 0.100 (2.54) 1st 2nd 3rd 0.110 (2.79) 0.490 (12.45) 0.100 (2.54) Allied Part Number Inductance (µh) DCR Max. (Ω) SRF Reference (MHz) Isat (A) Irms (A) PCIS60-100M-RC 10 .040 24 5.50 3.9 0.118 (3.00) Features • Magnetically shielded • High saturation current ratings up to 5.5 Amps with Irms current ratings PCIS60-150M-RC 15 .048 16 4.50 3.4 PCIS60-220M-RC 22 .059 14 3.50 3.1 PCIS60-330M-RC 33 .075 11 3.30 2.8 ups to 3.9 Amps. • Low DCR for minimal power loss. • Designed with high heat resistant materials for reflow operation. • Flat top for pick and place assembly • Wrap around terminals for excellent solder quality and inspection. PCIS60-470M-RC 47 .097 8.0 2.70 2.4 PCIS60-680M-RC 68 0.14 7.0 2.20 2.0 PCIS60-101M-RC 100 0.21 5.5 1.70 1.7 Electrical Inductance Range: 10µh to 1000µh. Tolerance: ±20% over the entire inductance range. Test Frequency: Inductance PCIS60-151M-RC 150 0.30 4.8 1.30 1.3 measured at 100KHz, 0.1 Vrms. Operating Temp.Range: i-40°C to +85°C. PCIS60-221M-RC 220 0.47 4.0 1.10 1.1 Inductance Drop: 10% typical at rated Isat. PCIS60-331M-RC 330 0.78 3.0 0.86 0.86 Temperature Rise: i∆T=40ºC rise 0 t0 0 typical at Irms. to 2000) x 10 -6°C. PCIS60-471M-RC 470 1.08 2.4 0.73 0.73 Physical PCIS60-681M-RC 680 1.40 2.0 0.64 0.64 Marking: Color Code using standard EIA three dot system. PCIS60-102M-RC 1000 2.01 1.0 0.53 0.53 Packaging: 500 pieces per 13 inch reel. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL Revised 03-25-08 www.alliedcomponents.com