1N914 Vishay Semiconductors Fast Switching Diodes Features • • • • • • Fast switching speed High reliability e2 High conductance For general purpose switching applications Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 94 9367 Mechanical Data Case: DO35 Glass case Weight: approx. 125 mg Cathode Band Color: black Packaging codes/options: TR/10 k per 13" reel (52 mm tape), 50 k/box TAP/10 k per Ammopack (52 mm tape), 50 k/box Parts Table Part 1N914 Ordering code Type Marking Remarks 1N914-TR or 1N914-TAP 1N914 Tape and Reel/Ammopack Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Symbol Value Unit Non repetitive peak reverse voltage Parameter Test condition VRM 100 V Repetitive peak reverse voltage VRRM 75 V Working peak reverse voltage VRWM 75 V VR 75 V DC blocking voltage RMS Reverse voltage Forward continuous current VR(RMS) 53 V IF 300 mA Average rectified current half wave rectification with resistive load and f > 50 MHz IFAV 200 mA Non repetitive peak forward surge current t = 1s IFSM 1 A t = 1µs IFSM 4 A Power dissipation I = 4 mm, TL = 25 °C Ptot 500 mW Thermal Characteristics Tamb = 25 °C unless otherwise specified Parameter Test condition Symbol Value Unit Thermal resistance junction to ambient air I = 4 mm, TL = constant RthJA 300 K/W Junction temperature Storage temperature range Document Number 85622 Rev. 1.7, 16-Feb-07 Tj + 175 °C Tstg - 65 to + 175 °C www.vishay.com 1 1N914 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Max Unit 1000 mV IR 5 µA IR 50 µA Forward voltage IF = 10 mA VF Breakdown voltage IR = 100 µA V(BR) Peak reverse current VR = 75V VR = 20V, Tj = 150 °C Min Typ. 100 V VR = 20V IR 25 nA Diode capacitance VR = 0, f = 1MHz CD 4 pF Reverse recovery time IF = 10 mA to IR = 1 mA, VR = 6 V, RL = 100 Ω trr 4 ns Typical Characteristics Tamb = 25 °C, unless otherwise specified 1000 1000 IR - Reverse Current (nA) I F - Forward Current (mA) 1N914 100 Scattering Limit 10 1 Tj = 25 °C 100 Scattering Limit 10 T j = 25 °C 0.1 1 0 0.4 0.8 1.2 1.6 2.0 1 V F - Forward Voltage (V) 94 9170_1 94 9098 Figure 1. Forward Current vs. Forward Voltage 10 100 V R - Reverse Voltage (V) Figure 2. Reverse Current vs. Reverse Voltage Package Dimensions in millimeters (inches): DO35 3.9 max. (0.154) 26 min. (1.024) 1.5 (0.059) 26 min. (1.024) 1.7 (0.067) 0.55 max. (0.022) Cathode Identification Rev. 6 - Date: 29.January 2007 Document no.: 6.560-5004.02-4 94 9366 www.vishay.com 2 Document Number 85622 Rev. 1.7, 16-Feb-07 1N914 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number 85622 Rev. 1.7, 16-Feb-07 www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1