ETC 313-010

Contents
Overview
2-3
RDM D-Subminiature Connectors
RDM 31 Series Contacts • Specifications & Interface Dimensions
RDM 31 Series Contacts
4
5-8
RDM Standard Series Contacts • Specifications & Interface Dimensions
RDM Standard Series Contacts
9
10-14
RDM-HF Series Contacts • Specifications & Interface Dimensions
RDM-HF Series Contacts
15
16-19
RDM 75 Ohm Contacts • Specifications & Interface Dimensions
RDM 75 Ohm Contacts
20
21-24
RDM High Power Contacts • Specifications & Interface Dimensions
RDM High Power Contacts
RDM High Voltage Contacts
25
26-27
28
RDM 40 Series For DIN Style Housings • Specifications & Interface Dimensions
RDM 40 Series For DIN Style Housings
29
30-32
D-Subminiature Housings
D-Subminiature Ordering Guide
33
D-Subminiature Selection Guide
34-35
D-Subminiature PCB Signal Contact Selection / Mounting Options
36
D-Subminiature Guide Pin Plates
37
D-Subminiature Shell Dimensions
38
D-Subminiature Edge Mount Connectors / PC Board Footprints
39
D-Subminiature Right Angle Mounting Dimensions
40
D-Subminiature Printed Circuit Board Footprint
41-76
Cable Reference Table
77
Mounting Hole Layouts
78
Cable Assembly Procedures
79-88
Tools
89-90
Other Product Offerings
91-92
While the information in this publication is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester/Retconn disclaims
responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Consult factory for specific information
on the latest design specifications.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/1
OVERVIEW • RDM Product Line
SERIES
14
20
21
22
23
24
26
27
28
29
30
DESCRIPTION
CENTER
CONTACT
OUTER
BODY
TYPICAL VIEW
75 Ohm crimp similar to the Plug: Female
Plug: Male
Socket
24 Series. Specifically
Receptacle: .040
designed for an AMP
Receptacle: Female
Dia. Male Pin
housing.
Standard Series;
solder / crimp and
solder / solder types.
Rated to 900 MHz.
Plug: Female
Plug: Male
Socket
Receptacle: .040
Receptacle: Female
Dia. Male Pin.
Similar to the 20 Series, thru Plug: Female
Plug: Male
Socket
50 Ohm. Popular with cellular manufacturers. Rated to Receptacle: .030
Receptacle: Female
Dia. Male pin
2 GHz.
High Power Contacts
solder, crimp, and P.C. pin
type.
High Voltage Contacts,
teflon bodies.
NONE
Plug: Male
NONE
Receptacle: Female
Plug: Female
Plug: Male
Socket
Receptacle: .040
Receptacle: Female
Dia. Male Pin
Plug: Female
75 Ohm crimp / crimp
Plug: Male
Socket
popular with computer work
Receptacle: .040
station manufacturers.
Receptacle: Female
Dia. Male Pin
Standard series, crimp /
Plug: Female
Plug: Male
crimp for flexible cable, solSocket
der / solder for semi-rigid Receptacle: .040
Receptacle: Female
cable. Rated to 1500 MHz.
Dia. Male Pin
Plug: Female
Similar to the 20 Series,
Plug: Male
Socket
except 75 Ohm impedance.
Popular with CATV / Video Receptacle: .040
Receptacle: Female
Dia. Male Pin
applications.
Similar to the 20 Series,
except, fits into a DIN
Housing. DIN 41612.
Plug: Female
Plug: Male
Socket
Receptacle: .040
Dia. Male Pin Receptacle: Female
Thru-50 crimp / crimp (cellu- Plug: Female
Plug: Male
lar mftr.) crimp / crimp for
Socket
flexible cable solder / sol- Receptacle: .030
der, for semi-rigid cables.
Dia. Male Pin Receptacle: Female
Plug: Female
DIN Coax Contacts for DIN
Plug: Male
Socket
Housings. 50 Ohm meet DIN
Receptacle: .020
Specifications.
Dia. Male Pin Receptacle: Female
Winchester/Retconn
DS/2
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
OVERVIEW • RDM Product Line
SERIES
DESCRIPTION
31
Blind Mate Contact, fits in
standard housing. Rated
to 5 GHz. Mates with PkZ.
32
High Power Contacts,
solder and crimp types
for DIN housings. Similar
to 22 Series.
37
40
CENTER
CONTACT
Plug: Female
Socket
Receptacle: .040
Dia. Male Pin
OUTER
BODY
Plug: Male
Receptacle: Female
NONE
Plug: Male
NONE
Receptacle: Female
Similar to 30 Series,
except 75 Ohms.
Plug: Female
socket
Receptacle: .015
Dia. Male Pin
Similar to 31 Series fits in
DIN housing.
Plug: Female
Socket
Receptacle: .040
Dia. Male Pin
TYPICAL VIEW
Plug: Male
Receptacle: Female
Plug: Male
Receptacle: Female
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/3
31 SERIES:
Specifications & Interface Dimensions
MECHANICAL:
ELECTRICAL:
Materials:
Bodies, Plugs: Brass per ASTM B16, 1/2 HD
Bodies, Receptacles: Beryllium Copper per ASTM B196
Female Contacts: Beryllium Copper per ASTM B196
Male Contacts: Brass per ASTM B16, 1/2 HD
Insulators: Teflon per ASTM D1710
Crimp Ferrule: Annealed Copper Alloy
Clip Ring: Beryllium Copper per ASTM B194
Finish:
Body: Gold Plated per MIL-G-45204
Center Contact: Gold Plated per MIL-G-45204
Clip Ring: Nickel Plated per QQ-N-290
Impedance: 50 Ohms Nominal
Frequency Range: 0 to 5.0 GHz
Insulation Resistance: 5000 Megaohms Minimum
Contact Resistance: (Milliohms maximum)
Center Contact: 5.0
Outer Contact: 3.0
Voltage Standing Wave Ratio: 0 to 5.0 GHz
Straight Connector: 1.15 +.02F GHz on RG-316 Cable
Straight Connector: 1.15 +.01F GHz on .141 Dia. Semi-Rigid
Cable
ENVIRONMENTAL:
MATING CHARACTERISTICS:
Receptacles, Outer Contact:
3 lbs. Maximum Insertion on a .1530 +.0001/-.0000 Dia. Pin
and a 4 oz. Minimum Withdrawl on a .1500 +.0000/-.0001 Dia. Pin
Operating Temperature: -55ºC to +125ºC
Vibration: MIL-STD-202, Method 204, Test Condition D
Shock: MIL-STD-202, Method 213, Test Condition I
Corrosion Resistance: MIL-STD-202, Method 101, Condition B
GENERAL INFORMATION:
Plugs, Center Contact:
31 Series Coaxial Contacts fit all D-Subminiature Connectors and
16 oz. Maximum Insertion on a .0410 +.0001/-.0000 Dia. Pin and are interchangeable with other manufacturer’s product. Available
a .5 oz. Minimum Withdrawl on a .0390 +.0000/-.0001 Dia. Pin
in crimp or solder cable terminations.
Retention in Shell: 15 lbs. Minimum
Plug Interface
Receptacle Interface
Winchester/Retconn
DS/4
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM 31 SERIES:
Straight
Plug
Printed Circuit Board Contacts
Part Number
310-010-6040G
Mounting Hole
N0. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Straight
Receptacle
Part Number
311-010-6040G
Mounting Hole
N0. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Right Angle Plug
Part Number
312-010-6040G
Mounting Hole
N0. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number
313-010-6040G
Mounting Hole
N0. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Straight
Plug
Part Number
310-010-6140G
Mounting Hole
N0. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/5
RDM 31 SERIES:
Printed Circuit Board Contacts
Straight
Receptacle
Part Number
311-010-6140G
Mounting Hole
N0. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Part Number
312-010-6140G
Right Angle Plug
Mounting Hole
N0. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Part Number
313-010-6140G
Right Angle Receptacle
Mounting Hole
N0. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
RDM 31 SERIES:
Straight
Plug
Crimp / Crimp, Flexible Cable
Part Number
310-910-0630G
310-910-0631G
310-910-1160G
310-910-1161G
Cable
RG- 316, 188
RG- 316 DS
RG- 141, 58
RG- 142, 223
“A” DIM
.93
.93
1.09
1.09
“B” DIM
.067
.067
.120
.120
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
DS/6
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM 31 SERIES:
Straight Receptacle
Crimp / Crimp, Flexible Cable
Part Number
311-910-0630G
311-910-0631G
311-910-1160G
311-910-1161G
Cable
RG- 316, 188
RG- 316 DS
RG- 141, 58
RG- 142, 223
“A” DIM
.89
.89
1.05
1.05
“B” DIM
.067
.067
.120
.120
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
Right
Angle
Plug
Part Number
312-910-0630G
312-910-0631G
312-910-1160G
312-910-1161G
Cable
“A” DIM
RG- 316, 188
.75
RG- 316 DS
.75
RG- 141, 58
.75
RG- 142, 223
.75
“B” DIM
.067
.067
.120
.120
“C” DIM
.50
.50
.60
.60
• See page 88 for cable assembly procedures: CAP 9-16
• Part number shown is for standard gold plating.
Right Angle
Receptacle
Part Number
313-910-0630G
313-910-0631G
313-910-1160G
313-910-1161G
Cable
“A” DIM
RG- 316, 188
.77
RG- 316 DS
.77
RG- 141, 58
.77
RG-142, 223
.77
“B” DIM
.067
.067
.120
.120
“C” DIM
.50
.50
.60
.60
• See page 88 for cable assembly procedures: CAP 9-16
• Part number shown is for standard gold plating.
RDM 31 SERIES:
Straight
Plug
Solder / Solder, Semi-Rigid Cable
Part Number
310-510-0850G
310-510-1410G
Cable
“A” DIM
RG- 405 (.085 SR)
.79
RG- 402 (.141 SR)
.79
“B” DIM
.090
.148
• See page 83 for cable assembly procedures: CAP 5-15
• Part number shown is for standard gold plating.
Straight
Receptacle
Part Number
311-510-0850G
311-510-1410G
Cable
“A” DIM
RG- 405 (.085 SR)
.75
RG- 402 (.141 SR)
.75
“B” DIM
.090
.148
• See page 83 for cable assembly procedures: CAP 5-15
• Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/7
RDM 31 SERIES:
Right
Angle
Plug
Solder / Solder, Semi-Rigid Cable
Part Number
312-510-0850G
312-510-1410G
Cable
“A” DIM
RG- 405 (.085 SR)
.75
RG- 402 (.141 SR)
.75
“B” DIM
.090
.148
“C” DIM
.31
.31
• See page 84 for cable assembly procedure: CAP 5-16
• Part number shown is for standard gold plating.
Right Angle
Receptacle
Part Number
313-510-0850G
313-510-1410G
Cable
“A” DIM
RG- 405 (.085 SR)
.77
RG- 402 (.141 SR)
.77
“B” DIM
.090
.148
“C” DIM
.31
.31
• See page 84 for cable assembly procedures: CAP 5-16
• Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
DS/8
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM: Specifications & Interface Dimensions
MECHANICAL:
ELECTRICAL:
Materials:
Bodies, Plugs: Brass per ASTM B16, 1/2 HD
Bodies, Receptacles: Beryllium Copper per ASTM B196
Female Contacts: Beryllium Copper per ASTM B196
Male Contacts: Brass per ASTM B16, 1/2 HD
Insulators: Teflon per ASTM D1710
Crimp Ferrule: Annealed Copper Alloy
Clip Ring: Phosphor Bronze per ASTM B103
Finish:
Body: Gold Plated per MIL-G-45204
Center Contact: Gold Plated per MIL-G-45204
Clip Ring: Nickel Plated per QQ-N-290
Impedance: 50 Ohms Nominal
Frequency Range: 0 to 900 MHz
Insulation Resistance: 1000 Megaohms Minimum
Contact Resistance: ( Milliohms Maximum)
Center Contact: 5.0
Outer Contact: 3.0
MATING CHARACTERISTICS:
GENERAL INFORMATION:
Receptacles, Outer Contact:
3 lbs. Maximum Insertion on a .1530 + .0001 / - .0000 Dia. Pin
and a 4 oz. Minimum Withdrawl on a .1500 + .0000 / - .0001
Dia. Pin
Plugs, Center Contact: 16 oz. Maximum Insertion on a .0410 +
.0001 /- .0000 Dia. Pin and .5 oz. Minimum Withdrawl on a
.0390 + .0000 / - .0001 Dia. Pin
Retention in Shell:
Plugs and Receptacles: 15 lbs. Minimum
RDM Coaxial Contacts fit all D-Subminiature Connectors and
are available in crimp or solder cable terminations.
ENVIRONMENTAL:
Operating Temperature: -55ºC to +125ºC
Vibration: MIL-STD-202, Method 204, Test Condition D
Shock: MIL-STD-202, Method 213, Test Condition l
Corrosion Resistance: MIL-STD-202, Method 101, Condition B
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/9
RDM:
Solder / Solder, Semi-Rigid Cable
Part Number
201-510-0470G
201-510-0850G
201-510-1410G
Straight
Receptacle
Cable
.047 SR
.085 SR
.141 SR
• See page 81 for cable assembly procedures: CAP 5-09
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Straight Plug
Part Number
200-510-0470G
200-510-0850G
200-510-1410G
Cable
.047 SR
.085 SR
.141 SR
• See page 81 for cable assembly procedures: CAP 5-09
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Right Angle
Receptacle
Part Number
203-510-0470G
203-510-0850G
203-510-1410G
Cable
.047 SR
.085 SR
.141 SR
“A”DIM
.29
.35
.35
• See page 82 for cable assembly procedures: CAP 5-10
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Right Angle
Plug
Part Number
202-510-0470G
202-510-0850G
202-510-1410G
Cable
.047 SR
.085 SR
.141 SR
“A”DIM
.29
.35
.35
• See page 82 for cable assembly procedures: CAP 5-10
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
RDM:
Solder / Solder, Flexible Cable
Straight
Receptacle
Part Number
201-510-0360G
201-510-0630G
201-510-1070G
201-510-1160G
201-510-1161G
Cable
RG- 178, 196
RG- 316, 188
RG- 180, 195
RG- 141, 58
RG- 142, 223
“A” DIM
.93
.93
1.03
1.03
1.03
• See page 79 for cable assembly procedures: CAP 5-07
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Dimensions shown are in inches.
Winchester/Retconn
DS/10
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM:
Solder / Solder, Flexible Cable
Straight Plug
Right Angle
Receptacle
Part Number
Cable
“A” DIM
200-510-0360G RG- 178, 196
.93
200-510-0630G RG- 316, 188
.93
200-510-1070G RG- 180, 195
1.03
200-510-1160G RG- 141, 58
1.03
200-510-1161G RG- 142, 223
1.03
• See page 79 for cable assembly procedures: CAP 5-07
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Part Number
203-510-0360G
203-510-0630G
203-510-1070G
203-510-1160G
203-510-1161G
Cable
“A” DIM
RG- 178, 196
.49
RG- 316, 188
.49
RG- 180, 195
.49
RG- 141, 58
.49
RG- 142, 223
.49
• See page 80 for cable assembly procedures: CAP 5-08
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Part Number
Cable
“A” DIM
202-510-0360G RG- 178, 196
.49
202-510-0630G RG- 316, 188
.49
202-510-1070G RG- 180, 195
.60
202-510-1160G RG- 141, 58
.60
202-510-1161G RG- 142, 223
.60
• See page 80 for cable assembly procedures: CAP 5-08
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Right
Angle
Plug
RDM:
Solder / Crimp, Flexible Cable
Straight
Receptacle
Part Number
201-910-0360G
201-910-0630G
201-910-1070G
201-910-1160G
201-910-1161G
Cable
RG- 178, 196
RG- 316, 188
RG- 180, 195
RG- 141, 58
RG- 142, 223
“A” DIM
.93
.93
1.03
1.03
1.03
• See page 85 for cable assembly procedures: CAP 9-01
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/11
RDM:
Solder / Crimp, Flexible Cable
Straight Plug
Part Number
200-910-0360G
200-910-0630G
200-910-1070G
200-910-1160G
200-910-1161G
Cable
RG- 178, 196
RG- 316, 188
RG- 180, 195
RG- 141, 58
RG- 142, 223
“A” DIM
.93
.93
1.03
1.03
1.03
• See page 85 for cable assembly procedures: CAP 9-01
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Right Angle
Receptacle
Part Number
203-910-0360G
203-910-0630G
203-910-1070G
203-910-1160G
203-910-1161G
Cable
RG- 178, 196
RG- 316, 188
RG- 180, 195
RG- 141, 58
RG- 142, 223
“A” DIM
.49
.49
.60
.60
.60
• See page 86 for cable assembly procedures: CAP 9-02
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Right
Angle
Plug
Part Number
202-910-0360G
202-910-0630G
202-910-1070G
202-910-1160G
202-910-1161G
Cable
RG- 178, 196
RG- 316, 188
RG- 180, 195
RG- 141, 58
RG- 142, 223
“A” DIM
.49
.49
.60
.60
.60
• See page 86 for cable assembly procedures: CAP 9-02
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
RDM:
Crimp / Crimp, Flexible Cable
Straight
Receptacle
Part Number
261-910-0630G
261-910-1070G
261-910-1160G
261-910-1161G
Cable
RG- 316, 188
RG- 180, 195
RG- 141, 58
RG- 142, 223
“A” DIM
.84
1.00
1.00
1.00
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Straight Plug
Dimensions shown are in inches.
Part Number
260-910-0630G
260-910-1070G
260-910-1160G
260-910-1161G
Cable
“A” DIM
RG- 316, 188
.86
RG- 180, 195
1.01
RG- 141, 58
1.01
RG- 142, 223
1.01
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Winchester/Retconn
DS/12
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM:
Printed Circuit Board Contacts
Straight
Receptacle
Part Number
201-010-6140G
Mounting Hole
NO. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Straight
Plug
Part Number
200-010-6140G
Mounting Hole
NO. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Right Angle
Receptacle
Part Number
203-010-6140G
Mounting Hole
NO. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Right
Angle
Plug
RDM:
Part Number
202-010-6140G
Mounting Hole
NO. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Same - Series Adapters
Receptacle /
Receptacle
Part Number
201-201-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/13
RDM:
Same - Series Adapters
Plug / Plug
Part Number
200-200-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
Plug /
Receptacle
Part Number
200-201-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”.
• For commercial finish change suffix to “C”.
RDM:
Between Series Adapters
RDM Plug /
SMA Plug
Part Number
200-350-0000H
• Part number shown is for gold plating.
• For nickel plate change suffix to “N”
RDM
Receptacle
SMA Jack
RDM
Receptacle
SMA Plug
RDM Plug /
SMA Jack
Part Number
201-351-0000H
• Part number shown is for gold plating.
• For nickel plate change suffix to “N”
Part Number
201-350-0000H
• Part number shown is for gold plating.
• For nickel plate change suffix to “N”
Part Number
200-351-0000H
• Part number shown is for gold plating.
• For nickel plate change suffix to “N”
Dimensions shown are in inches.
Winchester/Retconn
DS/14
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM - HF:
Specifications & Interface Dimensions
MECHANICAL:
ELECTRICAL:
Materials:
Bodies, Plugs: Brass per ASTM B16, 1/2 HD
Bodies, Receptacles: Beryllium Copper per ASTM B196
Female Contacts: Beryllium Copper per ASTM B196
Male Contacts: Brass per ASTM B16, 1/2 HD
Insulators: Teflon per ASTM D1710
Crimp Ferrule: Annealed Copper Alloy
Clip Ring: Phosphor Bronze per ASTM B103
Finish:
Body: Gold Plated per MIL-G-4504
Center Contact: Gold Plated per MIL-G-45204
Clip Ring: Nickel Plated per QQ-N-290
Impedance: 50 Ohms Nominal
Frequency Range: 0 to 1500 MHz
Insulation Resistance: 1000 Megaohms Minimum
Contact Resistance: (Milliohms Maximum)
Center Contact: 5.0
Outer Contact: 3.0
Dielectric Withstanding Voltage (DWV):
Straight: 1000 VRMS
Right Angle: 800 VRMS
Voltage Standing Wave Ratio:
1.15 Maximum from 0 to 1200 MHz
1.35 Maximum from 1200 to 1500 MHz
MATING CHARACTERISTICS
ENVIRONMENTAL:
Receptacles, Outer Contact:
3 lbs. Maximum Insertion on a .1530 +.0001 / - .0000 Dia.
Pin and a 4 oz. Minimum Withdrawl on a .1500 + .0000/
.0001 Dia. Pin
Plugs, Center Contact:
16oz. Maximum Insertion on a .0410 + .0001 / - .0000 Dia.
Pin and a 5 oz. Minimum Withdrawl on a .0390 + .0000 /
- .0001 Dia. Pin
Operating Temperature: -55ºC to +125ºC
Vibration: MIL-STD-202, Method 204, Test Condition D
Shock: MIL-STD-202, Method 213, Test Condition I
Corrosion Resistance: MIL-STD-202, Method 101, Condition B
GENERAL INFORMATION:
RDM Coaxial Contacts fit all D-Subminiature Connectors
and are interchangeable with other manufacturer’s
product. Available in crimp or solder cable terminations.
Retention in Shell: 15 lbs. Minimum
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/15
RDM - HF:
Solder / Solder, Semi-Rigid Cable
Straight
Receptacle
Part Number
211-510-0470G
211-510-0850G
211-510-1410G
Cable
.047 SR
.085 SR
.141 SR
• See page 81 for cable assembly procedures: CAP 5-09
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Straight Plug
Part Number
210-510-0470G
210-510-0850G
210-510-1410G
Cable
.047 SR
.085 SR
.141 SR
• See page 81 for cable assembly procedures: CAP 5-09
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right Angle
Receptacle
Part Number
213-510-0470G
213-510-0850G
213-510-1410G
Cable
.047 SR
.085 SR
.141 SR
“A” DIM
.29
.35
.35
• See page 82 for cable assembly procedures: CAP 5-10
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
Part Number
212-510-0470G
212-510-0850G
212-510-1410G
Cable
.047 SR
.085 SR
.141 SR
“A” DIM
.29
.35
.35
• See page 82 for cable assembly procedures: CAP 5-10
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
RDM - HF:
Solder / Crimp, Flexible Cable
Straight
Receptacle
Part Number
211-910-0360G
211-910-0630G
211-910-1070G
211-910-1160G
211-910-1161G
Cable
“A” DIM
RG- 178, 196
.93
RG- 316, 188
.93
RG- 180, 195
1.03
RG- 141, 58
1.03
RG- 142, 223
1.03
• See page 85 for cable assembly procedures: CAP 9-01
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
DS/16
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM - HF:
Solder / Crimp, Flexible Cable
Straight Plug
Part Number
210-910-0360G
210-910-0630G
210-910-1070G
210-910-1160G
210-910-1161G
Cable
“A” DIM
RG- 178, 196
.93
RG- 316, 188
.93
RG- 180, 195
1.03
RG- 141, 58
1.03
RG- 142, 223
1.03
• See page 85 for cable assembly procedures: CAP 9-01
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Receptacle
Part Number
213-910-0360G
213-910-0630G
213-910-1070G
213-910-1160G
213-910-1161G
Cable
“A” DIM
RG- 178, 196
.49
RG- 316, 188
.49
RG- 180, 195
.60
RG- 141, 58
.60
RG- 142, 223
.60
• See page 86 for cable assembly procedures: CAP 9-02
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
Part Number
212-910-0360G
212-910-0630G
212-910-1070G
212-910-1160G
212-910-1161G
Cable
“A” DIM
RG- 178, 196
.49
RG- 316, 188
.49
RG- 180, 195
.60
RG- 141, 58
.60
RG- 142, 223
.60
• See page 86 for cable assembly procedures: CAP 9-02
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
RDM - HF:
Crimp / Crimp, Flexible Cable
Straight
Receptacle
Part Number
291-910-0630G
291-910-1070G
291-910-1160G
291-910-1161G
Cable
“A” DIM
RG- 316, 188
.84
RG- 180, 195 1.00
RG- 141, 58
1.00
RG 142, 223
1.00
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/17
RDM - HF:
Crimp / Crimp, Flexible Cable
Straight Plug
Part Number
290-910-0630G
290-910-1070G
290-910-1160G
290-910-1161G
Cable
“A” DIM
RG- 316, 188
.86
RG- 180, 195
1.01
RG- 141, 58
1.01
RG- 142, 223
1.01
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
RDM - HF:
Printed Circuit Board Contacts
Straight
Receptacle
Part Number
211-010-6140G
Mounting Hole
N0. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Straight
Plug
Part Number
210-010-6140G
Mounting Hole
N0. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right Angle
Receptacle
Part Number
213-010-6140G
Mounting Hole
N0. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
Part Number
212-010-6140G
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
DS/18
Mounting Hole
N0. 061
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM - HF:
Same - Series Adapters
Receptacle /
Receptacle
Part Number
211-211-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Plug / Plug
Part Number
210-210-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Plug /
Receptacle
Part Number
210-211-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/19
RDM 75 OHM:
Specifications & Interface Dimensions
MECHANICAL:
ELECTRICAL:
Materials:
Bodies, Plugs: Brass per ASTM B16, 1/2 HD
Bodies Receptacles: Beryllium Copper per ASTM B196
Female Contacts: Beryllium Copper per ASTM B196
Male Contacts: Brass per ASTM B16, 1/2/ HD
Insulators: Teflon per ASTM D1710
Crimp Ferrule: Annealed Copper Alloy
Clip Ring: Phosphor Bronze per ASTM B103
Finish:
Body:Gold Plated per MIL-STD-45204
Center Contact: Gold Plated per MIL-STD-45204
Clip Ring: Nickel Plated per QQ-N-290
Impedance: 75 Ohm Nominal
Frequency Range: 0 - 2 GHz
Insulation Resistance: 1000 Megaohms Minimum
Contact Resistance: (Milliohms Maximum)
Center Contact: 5.0
Outer Contact: 3.0
Dielectric Withstanding Voltage (DWV):
Straight: 1000 VRMS
Right Angle: 800 VRMS
Voltage Standing Wave Ratio:
1.05 Maximum from 0 to 1000 MHz
1.25 Maximum from 1000 to 2000 MHz
MATING CHARACTERISTICS:
ENVIRONMENTAL:
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a
.1530 +.0001 / -.0000 Dia. Pin and 4 oz. Minimum Withdrawl
on a .1500 +.0000 / -.0001 Dia. Pin
Plugs, Center Contact: 16 oz. Maximum Insertion on a .0419
+.0001 / -.0000 Dia. Pin and 5 oz. Minimum Withdrawl on a
.0390 +.0000 /-.0001 Dia. Pin
Retension in Shell: 15 lbs. Minimum
Operating Temperature: -55ºC to +125ºC
Vibration: MIL-STD-202, Method 204, Test Condition D
Shock: MIL-STD-202, Method 213, Test Condition I
Corrosion Resistance: MIL-STD-202, Method 101, Condition B
GENERAL INFORMATION:
RDM Coaxial Contacts fit all D-Subminiature Connectors and
are interchangeable with other manufacturer’s product.
Available in crimp or solder cable versions.
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
DS/20
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM 75 OHM:
Solder / Solder, Semi-Rigid Cable
Straight
Receptacle
Part Number
271-510-0470G
271-510-0850G
271-510-1410G
Cable
.047 SR
.085 SR
.141 SR
• See page 81 for cable assembly procedures: CAP 5-09
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Straight Plug
Part Number
270-510-0470G
270-510-0850G
270-510-1410G
Cable
.047 SR
.085 SR
.141 SR
• See page 81 for cable assembly procedures: CAP 5-09
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right Angle
Receptacle
Part Number
273-510-0470G
273-510-0850G
273-510-1410G
Cable
.047 SR
.085 SR
.141 SR
“A” DIM
.29
.35
.35
• See page 82 for cable assembly procedures: CAP 5-10
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
Part Number
272-510-0470G
272-510-0850G
272-510-1410G
DIM
RDM 75 OHM:
Straight
Receptacle
Cable “A” DIM
.047 SR
.29
.085 SR
.35
.141 SR
.35
• See page 82 for cable assembly procedures: CAP 5-10
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Solder / Crimp, Flexible Cable
Part Number
271-910-0630G
271-910-1070G
Cable
“A” DIM
RG- 179
.93
BELDEN 8218 1.03
• See page 85 for cable assembly procedures: CAP 9-01
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/21
RDM 75 OHM:
Solder / Crimp, Flexible Cable
Straight Plug
Part Number
Cable
“A” DIM
270-910-0630G RG- 179
.93
270-910-1070G BELDEN 8218
1.03
• See page 85 for cable assembly procedures: CAP 9-01
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right Angle
Receptacle
Part Number
273-910-0630G
273-910-1070G
Cable
“A” DIM
RG- 179
.49
BELDEN 8218 .60
• See page 86 for cable assembly procedures: CAP 9-02
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
Part Number
Cable
“A” DIM
272-910-0630G RG- 179
.49
272-910-1070G BELDEN 8218
.60
• See page 86 for cable assembly procedures: CAP 9-02
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
RDM 75 OHM:
Straight
Receptacle
Crimp / Crimp, Flexible Cable
Part Number
241-910-0630G
241-910-1070G
Cable
“A” DIM
RG- 179
.84
BELDEN 8218
1.00
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Straight Plug
Part Number
240-910-0630G
240-910-1070G
Cable
“A” DIM
RG- 179
.86
BELDEN 8218 1.01
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
DS/22
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM 75 OHM:
Printed Circuit Board Contacts
Straight
Receptacle
Part Number
271-010-6140G
Mounting Hole
No. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Straight Plug
Part Number
270-010-6140G
Mounting Hole
No. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right Angle
Receptacle
Part Number
273-010-6140G
Mounting Hole
No. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
RDM 75 OHM:
Receptacle /
Receptacle
Part Number
272-010-6140G
Mounting Hole
No. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Same - Series Adapters
Part Number
271-271-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/23
RDM 75 OHM:
Plug / Plug
Same - Series Adapters
Part Number
270-270-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Plug /
Receptacle
Part Number
270-271-0000G
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
DS/24
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM HIGH POWER:
Specifications & Interface Dimensions
MECHANICAL:
ELECTRICAL:
Materials:
Bodies, Plugs: Brass per ASTM B16, 1/2 HD
Bodies Receptacles: Beryllium Copper per ASTM B196
Spring Washers: Phosphor Bronze per ASTM B103
Clip Ring: Phosphor Bronze per ASTM B103
Finish:
Bodies: Gold Plated per MIL-STD-45204
Clip Ring: Nickel Plated per QQ-N-290
Current Rating: 10, 20, 40 AMPS
Contact Resistance: 3.0 Milliohms
ENVIRONMENTAL:
Operating Temperature: -55ºC to +125ºC
Vibration: MIL-STD-202, Method 204, Test Condition D
Shock: MIL-STD-202, Method 213, Test Condition I
Corrosion Resistance: MIL-STD-202, Method 101,
Condition B
MATING CHARACTERISTICS:
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a
.1530 +.0001 / -.0000 Dia. Pin and a 4 oz. Minimum Withdrawl
on a .1500 +.0000 / -.0001 Dia. Pin
GENERAL INFORMATION:
RDM Coaxial Contacts fit all D-Subminiature Connectors
and are interchangeable with other manufacturer’s product.
Available in crimp or solder cable terminations.
Retention in Shell: 15 lbs. Minimum
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/25
RDM HIGH POWER:
Solder, Flexible Cable
Straight
Receptacle
Part Number
221-510-0000G
221-510-0001G
221-510-0002G
Wire
Gauge
# 8
# 12
# 16
Current “A” DIM
Rating
40 AMP
.188
20 AMP
.110
10 AMP
.069
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Straight Plug
Part Number
220-510-0000G
220-510-0001G
220-510-0002G
Wire Gauge Current Rating “A” DIM
#8
40 AMP
.188
# 12
20 AMP
.110
# 16
10 AMP
.069
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right Angle
Receptacle
Part Number
Wire
Gauge
223-510-0000G # 8
223-510-0001G # 12
223-510-0002G # 16
Current “A” DIM
Rating
40 AMP
.188
20 AMP
.110
10 AMP
.069
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
Part Number
222-510-0000G
222-510-0001G
222-510-0002G
.365
RDM HIGH POWER:
Straight
Receptacle
Wire Gauge Current Rating “A” DIM
#8
40 AMP
.188
# 12
20 AMP
.110
# 16
10 AMP
.069
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Crimp, Flexible Cable
Part Number
221-910-0000G
221-910-0001G
221-910-0002G
Wire
Gauge
#8
# 12
# 16
Current
Rating
40 AMP
20 AMP
10 AMP
“A” DIM
.188
.110
.069
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
DS/26
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM HIGH POWER:
Crimp, Flexible Cable
Straight Plug
Part Number
220-910-0000G
220-910-0001G
220-910-0002G
Wire Gauge Current Rating “A” DIM
#8
40 AMP
.188
# 12
20 AMP
.110
# 16
10 AMP
.069
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right Angle
Receptacle
Part Number
223-910-0000G
223-910-0001G
223-910-0002G
Wire
Gauge
#8
# 12
# 16
Current
Rating
40 AMP
20 AMP
10 AMP
“A” DIM
.188
.110
.069
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
Part Number
222-910-0000G
222-910-0001G
222-910-0002G
Wire Gauge Current Rating “A” DIM
#8
40 AMP
.188
# 12
20 AMP
.110
# 16
10 AMP
.069
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
RDM HIGH VOLTAGE:
Straight Plug
Solder, Flexible Cable
Part Number
230-510-0000H
Wire Gauge
# 16
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Straight
Receptacle
Part Number
231-510-0000H
Wire Gauge
# 16
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/27
RDM HIGH VOLTAGE:
Right Angle
Receptacle
Solder, Flexible Cable
Part Number
233-510-0000H
Wire Gauge
# 16
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Right
Angle
Plug
Part Number
232-510-0000H
• Part number shown is for standard gold plating.
• For military finish change suffix to “H”
• For commercial finish change suffix to “C”
Dimensions shown are in inches.
Winchester/Retconn
DS/28
Wire Gauge
# 16
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
40 SERIES:
Specifications & Interface Dimensions
MECHANICAL:
ELECTRICAL:
Materials:
Bodies, Plugs: Brass per ASTM B16, 1/2 HD
Bodies Receptacles: Beryllium Copper per ASTM B196
Female Contacts: Beryllium Copper per ASTM B196
Male Contacts: Brass per ASTM B16, 1/2 HD
Insulators: Teflon per ASTM D1710
Crimp Ferrule: Annealed Copper Alloy
Clip Ring: Beryllium Copper per ASTM B194
Finish:
Body: Gold Plated per MIL-STD-45204
Center Contact: Gold Plated per MIL-STD-45204
Clip Ring: Nickel Plated per QQ-N-290
Impedance: 50 Ohms Nominal
Frequency Range: 0 to 5.0 GHz
Insulation Resistance: 5000 Megaohms Minimum
Contact Resistance: (Milliohms Maximum)
Center Contact: 5.0
Outer Contact: 3.0
Voltage Standing Wave Ratio: 0 to 5.0 GHz
Straight Connector: 1.15 +.02F GHz on RG-316 Cable
Straight Connector: 1.15 +.01F GHz on .141 Dia. Semi-rigid
Cable
MATING CHARACTERISTICS:
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on
a .1530 +.0001 / -.0000 Dia. Pin and a 4 oz. Minimum
Withdrawl on a .1500 +.0000 / -.0001 Dia. Pin
Plugs, Center Contact: 16 oz. Maximum on a .0410 +.0001 /
-.0000 Dia. Pin and 5 oz. Minimum Withdrawl on a .0390
+.0000 / -.0001 Dia. Pin
ENVIRONMENTAL:
Operating Temperature: -55ºC to +125ºC
Vibration: MIL-STD-202, Method 204, Test Condition D
Shock: MIL-STD-202, Method 213, Test Condition I
Corrosion Resistance: MIL-STD-202, Test Method 101,
Condition B
GENERAL INFORMATION:
31 Series Coaxial Contacts fit housings per DIN 41612
Available in crimp or solder cable terminations
Retension in Shell: 15 lbs. Minimum
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/29
RDM 40 SERIES:
Straight Plug
Printed Circuit Board Contacts
Part Number
Mounting Hole
400-010-6040G
No. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Straight
Receptacle
Part Number
401-010-6040G
Mounting Hole
No. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Right
Angle
Plug
Right Angle
Receptacle
Part Number
402-010-6040G
Mounting Hole
No. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Part Number
Mounting Hole
403-010-6040G
No. 060A
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Straight Plug
Part Number
Mounting Hole
400-010-6140G
No. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
DS/30
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
RDM 40 SERIES:
Printed Circuit Board Contacts
Part Number
Mounting Hole
401-010-6140G
No. 061
Straight
Receptacle
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Right
Angle
Plug
Part Number
Mounting Hole “A” DIM
402-010-6140G
No. 061
.76
402-010-6141G
No. 061
.86
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
Right Angle
Receptacle
Part Number
Mounting Hole
403-010-6140G
No. 061
• See page 78 for mounting hole layout.
• Part number shown is for standard gold plating.
RDM 40 SERIES:
Straight Plug
Crimp / Crimp, Flexible Cable
Part Number
400-910-0630G
400-910-0631G
400-910-1160G
400-910-1161G
Cable
“A” DIM
RG- 316, 188
.93
RG- 316, DS
.93
RG- 141, 58
1.09
RG- 142, 223 1.09
“B”DIM
.067
.067
.120
.120
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
Straight
Receptacle
Part Number
401-910-0630G
401-910-0631G
401-910-1160G
401-910-1161G
Cable
“A” DIM
RG- 316, 188
.86
RG-316, DS
.86
RG-141, 58
1.02
RG- 142, 223 1.02
“B”DIM
.067
.067
.120
.120
• See page 87 for cable assembly procedures: CAP 9-07
• Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/31
RDM 40 SERIES:
Right
Angle
Plug
Crimp / Crimp, Flexible Cable
Part Number
402-910-0630G
402-910-0631G
402-910-1160G
402-910-1161G
Cable
“A” DIM
RG- 316, 188
.75
RG- 316, DS
.75
RG- 141, 58
.75
RG- 142, 223
.75
“B”DIM
.067
.067
.120
.120
“C”DIM
.50
.50
.60
.60
• See page 88 for cable assembly procedures: CAP 9-16
• Part number shown is for standard gold plating.
Right Angle
Receptacle
Part Number
403-910-0630G
403-910-0631G
403-910-1160G
403-910-1161G
Cable
“A” DIM
RG- 316, 188
.71
RG- 316, DS
.71
RG- 141, 58
.71
RG- 142, 223
.71
“B”DIM
.067
.067
.120
.120
“C”DIM
.50
.50
.60
.60
• See page 88 for cable assembly procedures: CAP 9-16
• Part number shown is for standard gold plating.
RDM 40 SERIES:
Straight Plug
Solder / Solder, Semi-Rigid Cable
Part Number
Cable
“A” DIM
400-510-0850G RG- 405 (.085 SR)
.79
400-510-1410G RG- 402 (.141 SR)
.79
“B”DIM
.090
.148
• See page 83 for cable assembly procedures: CAP 5-15
• Part number shown is for standard gold plating.
Straight
Receptacle
Part Number
Cable
“A” DIM
401-510-0850G RG- 405 (.085 SR)
.72
401-510-1410G RG- 402 (.141 SR)
.72
“B”DIM
.090
.148
• See page 83 for cable assembly procedures: CAP 5-15
• Part number shown is for standard gold plating.
Right
Angle
Plug
Part Number
Cable
“A” DIM
402-510-0850G RG- 405 (.085 SR)
.75
402-510-1410G RG- 402 (.141 SR)
.75
“B”DIM
.090
.148
“C” DIM
.31
.31
• See page 84 for cable assembly procedures: CAP 5-16
• Part number shown is for standard gold plating.
Right Angle
Receptacle
Part Number
Cable
“A” DIM
403-510-0850G RG- 405 (.085 SR)
.69
403-510-1410G RG- 402 (.141 SR)
.69
“B”DIM “C” DIM
.090
.31
.148
.31
• See page 84 for cable assembly procedures: CAP 5-16
• Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
DS/32
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE:
Connector Ordering Guide
Standard Housings
36
Example: RM2W7P-50-TD= 24W7 Male Housing, With Assembled Solder Cup Contacts, Tin Plated, With RFI
Indents, And Standard Mounting
Edgemount D-Subminiature Connectors (RM - 2000 Series)
Note: Edgemount Coaxial Connectors are supplied installed in housing
Example: RM5W5P-2010-20= 5W5 Male Edgemount Housing, Tin Plated, Without RFI Indents, With RDM 20
Series Coaxial Connectors, For Use In A .030” Thick PC Board.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/33
D-SUBMINIATURE CONNECTOR:
Selection Guide
Shell Size E
5W1
No. of size 8 contacts: 1
No. of size 20 contacts: 4
1W1
No. of size 8 contacts: 1
No. of size 20 contacts: 0
3W3
No. of size 8 contacts: 3
No. of size 20 contacts: 0
2W2
No. of size 8 contacts: 2
No. of size 20 contacts: 0
Shell Size A
11W1
No. of size 8 contacts: 1
No. of size 20 contacts: 10
7W2
No. of size 8 contacts: 2
No. of size 20 contacts: 5
Shell Size B
4W4
No. of size 8 contacts: 4
No. of size 20 contacts: 0
13W3
No. of size 8 contacts: 3
No. of size 20 contacts: 10
5W5
No. of size 8 contacts: 5
No. of size 20 contacts: 0
9W4
No. of size 8 contacts: 4
No. of size 20 contacts: 5
17W2
No. of size 8 contacts: 2
No. of size 20 contacts: 15
21W1
No. of size 8 contacts: 1
No. of size 20 contacts: 20
Shell Size C
6W6
No. of size 8 contacts: 6
No. of size 20 contacts: 0
7W7
No. of size 8 contacts: 7
No. of size 20 contacts: 0
Winchester/Retconn
DS/34
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTOR:
Selection Guide
Shell Size C (Continued)
8W8
No. of size 8 contacts: 8
No. of size 20 contacts: 0
13W6
No. of size 8 contacts: 6
No. of size 20 contacts: 7
17W5
No. of size 8 contacts: 5
No. of size 20 contacts: 12
21WA4
No. of size 8 contacts: 4
No. of size 20 contacts: 17
21W4
No. of size 8 contacts: 4
No. of size 20 contacts: 17
25W3
No. of size 8 contacts: 3
No. of size 20 contacts: 22
27W2
No. of size 8 contacts: 2
No. of size 20 contacts: 25
Shell Size D
24W7
No. of size 8 contacts: 7
No. of size 20 contacts: 17
36W4
No. of size 8 contacts: 4
No. of size 20 contacts: 32
43W2
No. of size 8 contacts: 2
No. of size 20 contacts: 41
47W1
No. of size 8 contacts: 1
No. of size 20 contacts: 46
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/35
D-SUBMINIATURE:
PCB Signal Contact Selection
D-SUBMINIATURE:
0 - Standard
Mounting Options
1 - 4-40 Clinch Nuts
6 - Swaged Stand-Offs
2 - Float Mount Bushings
7- Swaged Stand-Offs With Guide Pins
• See page 40 for right angle mounting dimensions
Dimensions shown are in inches.
Winchester/Retconn
DS/36
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE:
Guide Pin Plates
Male
Female
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/37
D-SUBMINIATURE:
Shell Dimensions
Plug Shell
Rear Shell (Plug & Receptacle)
Receptacle Shell
Securing Methods
Roll Over Tabs
Rivet
GENDER:
P: Plug (Pin Signal Contacts)
R: Receptacle (Socket Signal Contacts)
Dimensions shown are in inches.
Winchester/Retconn
DS/38
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE:
Edgemount Connectors (Patent Information Pending)
See page 33 for part number selection.
PC BOARD FOOTPRINTS
(male footprint shown • female footprint is mirror image)
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/39
D-SUBMINIATURE:
Right Angle Mounting Dimensions
Right Angle
Power Contacts
Right Angle
Coaxial Contacts
Dimensions shown are in inches.
Winchester/Retconn
DS/40
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Viewed from component side of PCB.
Male footprint shown.
Female footprint mirrored.
2W2
Straight Coax Contacts
3W3
Viewed from component side of PCB.
Male footprint shown.
Female footprint mirrored.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint mirrored.
4W4
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint mirrored.
5W5
Straight Coax Contacts
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/41
D-SUBMINIATURE CONNECTORS:
Footprints
6W6
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
7W7
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
8W8
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
5W1
Straight Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/42
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
7W2
Straight Coax Contacts
Footprints
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
11W1
Straight Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
9W4
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
13W3
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/43
D-SUBMINIATURE CONNECTORS:
17W2
Footprints
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
21W1
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
13W6
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/44
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
17W5
Footprints
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
21WA4
Straight Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/45
D-SUBMINIATURE CONNECTORS:
21W4
Footprints
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
25W3
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/46
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
27W2
Footprints
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
24W7
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/47
D-SUBMINIATURE CONNECTORS:
36W4
Footprints
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
43W2
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/48
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
47W1
Footprints
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/49
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
2W2
Right Angle Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
3W3
Right Angle Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
4W4
Right Angle Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
5W5
Right Angle Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/50
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTOR:
Footprints
Mating Face
of Connector
6W6
Right Angle Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
7W7
Right Angle Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
8W8
Right Angle Coax Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
5W1
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/51
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
7W2
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
11W1
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
9W4
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
13W3
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/52
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
17W2
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
21W1
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
13W6
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
17W5
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Winchester/Retconn
Dimensions shown are in inches.
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/53
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
21WA4
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
21W4
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/54
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
25W3
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
27W2
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950• Internet: http://www.litton-wed.com
DS/55
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
24W7
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
36W4
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/56
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
43W2
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
47W1
Right Angle Coax Contacts
Signal Contact Dia.
.040
.030
.024
“D” DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/57
D-SUBMINIATURE CONNECTORS:
2W2
Footprints
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Straight Power Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
3W3
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Straight Power Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
4W4
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Straight Power Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
5W5
Straight Power Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/58
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
6W6
Straight Power Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
7W7
Straight Power Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
8W8
Straight Power Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/59
D-SUBMINIATURE CONNECTORS:
5W1
Straight Power Contacts
Footprints
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
7W2
Straight Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
11W1
Straight Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
9W4
Straight Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/60
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
13W3
Footprints
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Straight Power Contacts
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Signal Contact Dia.
.040
.030
.024
17W2
Straight Power Contacts
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
21W1
Straight Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/61
D-SUBMINIATURE CONNECTORS:
13W6
Straight Power Contacts
Footprints
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
17W5
Straight Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
21WA4
Straight Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/62
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
21W4
Straight Power Contacts
Footprints
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
25W3
Straight Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/63
D-SUBMINIATURE CONNECTORS:
27W2
Straight Power Contacts
Footprints
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Signal Contact Dia.
.040
.030
.024
24W7
Straight Power Contacts
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/64
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
36W4
Straight Power Contacts
Footprints
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Signal Contact Dia.
.040
.030
.024
43W2
Straight Power Contacts
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/65
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia.
.040
.030
.024
47W1
Straight Power Contacts
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/66
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
2W2
Right Angle Power Contacts
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
3W3
Right Angle Power Contacts
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
4W4
Right Angle Power Contacts
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
5W5
Right Angle Power Contacts
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/67
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
6W6
Right Angle Power Contacts
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
7W7
Right Angle Power Contacts
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
8W8
Right Angle Power Contacts
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/68
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS: Footprints
Mating Face
of Connector
5W1
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
7W2
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
11W1
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/69
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
9W4
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
13W3
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/70
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTOR:
Footprints
Mating Face
of Connector
17W2
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
21W1
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
13W6
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/71
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
17W5
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
21WA4
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/72
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D- SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
21W4
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
25W3
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/73
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
27W2
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
24W7
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/74
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face
of Connector
36W4
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Mating Face
of Connector
43W2
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/75
D-SUBMINIATURE CONNECORS:
Footprints
Mating Face
of Connector
47W1
Right Angle Power Contacts
Signal Contact Dia.
.040
.030
.024
“D”DIM.
.055 MIN.
.045 MIN.
.040 MIN.
Power Contact Dia. “P”DIM.
.125
.144 MIN.
.078
.098 MIN.
Viewed from component side of PCB.
Male footprint shown.
Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/76
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
CABLE REFERENCE TABLE
CABLE
RG-402
RG-405
CENTER
CONDUCTOR
.0359
.0201
O.D.
DIELECTRIC
.1175
.0658
O.D.
JACKET
.141
.086
IMPEDANCE
(Ohms)
50
50
CABLE
CENTER
CONDUCTOR
O.D.
DIELECTRIC
O.D.
SHIELD
O.D.
JACKET
IMPEDANCE
(Ohms)
RG-8A/U
.0285
.285
-
.405
50
RG-9B/U
.0285
.280
-
.420
50
RG-55
.032
.116
.176
.176
50
RG-58
.038
.116
.150
.150
50
RG-58A
.0071
.116
-
.195
50
RG-59
.023
.146
.191
.191
75
RG-62
.025
.146
.191
.191
93
RG-62A
.0253
.146
-
.242
93
RG-71
.025
.146
.208
.208
93
RG-140
.025
.146
.176
.176
75
RG-141
.039
.116
.146
.146
50
RG-141A
.0390
.116
-
.190
50
RG-142
.039
.116
.171
.171
50
RG-174
.019
.060
.080
.080
50
RG-178
.012
.034
.054
.054
50
RG-179
.012
.060
.084
.084
75
RG-179B/U
.0040
.063
-
.100
75
RG-180
.012
.102
.124
.124
95
RG-187
.012
.060
.084
.084
75
RG-187A/U
.0040
.060
-
.11
75
RG-188
.020
.060
.081
.081
50
RG-188A/U
.0067
.060
-
.110
50
RG-195
.012
.102
.124
.124
95
RG-196
.012
.034
.054
.054
50
RG-210/U
.0253
.146
-
.242
93
RG-213/U
.0296
.285
-
.405
50
RG-214/U
.0296
.285
-
.425
50
RG-223
.032
.116
.176
.176
50
RG-303
.039
.116
.146
.146
50
RG-316
.020
.060
.081
.081
50
RG-316 DS
.020
.060
.102
.102
50
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/77
MOUNTING HOLE LAYOUTS
Number 060 A
Number 060 B
Number 060 C
Number 065
Number 066
Dimensions shown are in inches.
Winchester/Retconn
DS/78
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
CABLE ASSEMBLY PROCEDURES: 5-07
Part Numbers
“A” Dim “B” Dim
200-510-0360G 201-510-0360G
1/4
5/16
200-510-0362G 201-510-0362G
9/32
7/32
200-510-0630G 201-510-0630G
1/4
5/16
200-510-1070G 201-510-1070G
5/16
3/8
200-510-1160G 201-510-1160G
5/16
3/8
“C” Dim
5/64
5/64
5/64
5/64
5/64
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/79
CABLE ASSEMBLY PROCEDURES: 5-08
Part Numbers
“A” Dim “B” Dim
202-510-0360G 203-510-0360G
15/64
3/8
202-510-0630G 203-510-0630G
15/64
3/8
202-510-1070G 203-510-1070G
5/16
27/64
202-510-1160G 203-510-1160G
5/16
27/64
Winchester/Retconn
DS/80
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
“C” Dim
1/16
1/16
3/32
3/32
CABLE ASSEMBLY PROCEDURES: 5-09
Part Numbers
“A” Dim “B” Dim
200-510-0850G 201-510-0360G
5/32
5/64
200-510-1410G 201-510-0630G
7/64
5/64
210-510-0850G 211-510-1070G
5/32
5/64
210-510-1410G 211-510-1160G
7/64
5/64
270-510-0850G 271-510-0850G
5/32
5/64
270-510-0850G 271-510-1410G
7/64
5/64
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/81
CABLE ASSEMBLY PROCEDURES: 5-10
Part Numbers
“A” Dim “B” Dim
202-510-0360G 203-510-0360G
5/32
3/32
202-510-0630G 203-510-0630G
7/64
3/32
212-510-1070G 203-510-1070G
5/32
3/32
212-510-1160G 203-510-1160G
7/64
3/32
272-510-0850G 273-510-0850G
5/32
3/32
272-510-1410G 273-510-1410G
7/64
3/32
Winchester/Retconn
DS/82
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
CABLE ASSEMBLY PROCEDURES: 5-15
Part Numbers
“A” Dim
310-510-0850G 311-510-0850G
.020
310-510-1410G 311-510-1410G
.025
400-510-0850G 401-510-0850G
.020
400-510-1410G 401-510-1410G
.025
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/83
CABLE ASSEMBLY PROCEDURES: 5-16
Winchester/Retconn
DS/84
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
CABLE ASSEMBLY PROCEDURES: 9-01
Part Numbers
“A” Dim “B” Dim
200-910-0360G 201-910-0360G
1/4
5/16
200-910-0630G 201-910-0630G
1/4
5/16
200-910-1070G 201-910-1070G
5/16
3/8
200-910-1160G 201-910-1160G
5/16
3/8
“C” Dim
5/64
5/64
5/64
5/64
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/85
CABLE ASSEMBLY PROCEDURES: 9-02
Part Numbers
“A” Dim “B” Dim
202-910-0360G 203-910-0360G
15/64
3/8
202-910-0630G 203-910-0630G
15/64
3/8
202-910-1070G 203-910-1070G
5/16
27/64
202-910-1160G 203-910-1160G
5/16
27/64
Winchester/Retconn
DS/86
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
“C” Dim
1/16
1/16
3/32
3/32
CABLE ASSEMBLY PROCEDURES: 9-07
Part Numbers
240-910-0630G
240-910-1070G
260-910-0630G
260-910-1160G
260-910-1161G
290-910-0630G
290-910-1160G
290-910-1161G
241-910-0630G
241-910-1070G
261-910-0630G
261-910-1160G
261-910-1161G
291-910-0630G
291-910-1160G
291-910-1161G
Center Contact Only
Crimp Tool Positioner Setting
T2400
P0630
4
T2400
P0630
4
T2400
P0630
4
T2400
P0630
7
T2400
P0630
7
T2400
P0630
4
T2400
P0630
7
T2400
P0630
7
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/87
CABLE ASSEMBLY PROCEDURES: 9-16
Part Numbers
“A” Dim “B” Dim
312-910-0630G 313-910-0630G
.234
.312
312-910-0631G 313-910-0631G
.234
.312
312-910-1160G 313-910-1160G
.312
.375
312-910-1161G 313-910-1161G
.312
.375
Ferrule Hex. Size
.128
.151
.213
.213
Dimensions shown are in inches.
Winchester/Retconn
DS/88
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
Connector Tools
Part Number
T-1001
Crimp Tool
(For HEX Dies)
Die Set
Part Number
T-1001-2
T-1001-3
T-1001-5
A HEX Length B HEX Length
.128
.325
.105
.325
.213
.325
.178
.325
.314
.400
.155
.400
Note: To be used with crimp tool (T-1001)
Center Contact
Crimping Tool
Part Number
T-2400
Positioner
Part Number
P0630
Note: To be used with center contact
crimping tool (T-2400)
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/89
Connector Tools
Contact Withdrawl Tool
Part Number
T-1000
Tool For Inserting
Stabilizing Ring Into Housing
Part Number
T-1004
Insertion Tool
Coax Contacts
Part Number
T-1003
Dimensions shown are in inches.
Winchester/Retconn
DS/90
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
Other Product Offerings
Winchester/Retconn
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
DS/91
Other Product Offerings
Our
Products
are limited
only by your
imagination
Winchester/Retconn
DS/92
400 Park Road • Watertown, Connecticut 06795-5000 • Phone: (860) 945-5000 • FAX: (860) 945-3950 • Internet: http://www.litton-wed.com
Winchester/Retconn
RDM
COMBINATION
D-SUBMINIATURE
CONNECTORS
Re-order Number: CAT-COMBO-D2000