SMD POWER INDUCTORS SDC0603 SERIES 1. PART NO. EXPRESSION : SDC06032R0MZF (a) (b) (c) (d)(e)(f) (a) Series code (d) Tolerance code : M = ±20% (b) Dimension code (e) X, Y, Z : Standard part (c) Inductance code : 2R0 = 2.0uH (f) F : Lead Free 2. CONFIGURATION & DIMENSIONS : C B D F I H I E A 100 G PCB Pattern Unit:m/m A B C D E F G H I 6.2 Max. 6.30±0.3 3.5 Max. 0.6 Typ. 2.0 Typ. 4.8 Typ. 4.6 Ref. 2.6 Ref. 1.0 Ref. 3. SCHEMATIC : 4. MATERIALS : f (a) Core : DR Ferrite Core a (b) Core : RI Ferrite Core b c (c) Wire : Enamelled Copper Wire (d) Lead : Tinned Copper Wire (e) Adhesive : Epoxy (f) Ink : Bon Margue d e 5. GENERAL SPECIFICATION : a) Irms : Temp. rise 40°C Max. b) Isat : ǻL/L0A=30% Max. c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +85°C e) Resistance to solder heat : 260°C.10 secs NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS SDC0603 SERIES 6. ELECTRICAL CHARACTERISTICS : Part No. Inductance ( µH ) Test Freq. ( Hz ) RDC ( mȍ ) Typ. Isat (A) Max. Irms (A) Max. SDC06032R0MZF 2.0±20% 100K 19.1 2.997 3.30 SDC06032R7MZF 2.7±20% 100K 22.0 2.691 3.12 SDC06033R3MZF 3.3±20% 100K 25.7 2.573 2.81 SDC06034R7MZF 4.7±20% 100K 31.6 2.084 2.51 SDC06036R2MZF 6.2±20% 100K 35.0 1.835 2.41 SDC06038R2MZF 8.2±20% 100K 43.5 1.542 2.11 SDC0603100MZF 10.0±20% 100K 49.4 1.491 1.97 SDC0603120MZF 12.0±20% 100K 62.0 1.282 1.73 SDC0603150MZF 15.0±20% 100K 77.0 1.103 1.54 SDC0603180MZF 18.0±20% 100K 81.5 1.046 1.52 SDC0603220MZF 22.0±20% 100K 106.0 0.968 1.29 SDC0603270MZF 27.0±20% 100K 140.0 0.821 1.11 SDC0603330MZF 33.0±20% 100K 162.0 0.755 1.02 SDC0603390MZF 39.0±20% 100K 192.0 0.700 0.96 SDC0603470MZF 47.0±20% 100K 209.0 0.677 0.89 SDC0603560MZF 56.0±20% 100K 257.0 0.602 0.80 SDC0603680MZF 68.0±20% 100K 320.0 0.556 0.71 SDC0603820MZF 82.0±20% 100K 420.0 0.468 0.61 SDC0603101MZF 100.0±20% 100K 477.0 0.449 0.57 SDC0603151MZF 150.0±20% 100K 664.0 0.367 0.48 NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS SDC0603 SERIES RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS 10s max. 255°C Natural cooling 230°C 180°C 150°C Pre-heating 40s max. 90 to 120s 7. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE N ØC B A 2.0±0.5 ØC D G EMBOSSED CARRIER * CARRIER TAPE WIDTH : D P:12 m/m 4 m/m 100 100 100 100 100 100 ( 2 ) DIMENSIONS Unit:m/m STYLE A B C D G 13-16 330 21±0.8 13 16 18 T N +0 50 -0 22.4 ( 3 ) Q'TY & G.W. PER PACKAGE INNER : REEL SERIES SDC0603 OUTER : CARTON Q'TY (PCS) G.W. (gw) STYLE Q'TY (PCS) G.W. (Kg) SIZE (cm) 1000 800 13-16 6000 8.3 40 x 40 x 24 NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS SDC0603 SERIES 8. RELIABILTY AND TEST CONDITION : TEST ITEM SOLDERABILITY SPECIFICATION TEST CONDITION MORE THAN 90% OF THE PREHEAT : 125±25°C FOR 60 SECONDS TERMINAL ELECTRODE SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SHALL BE COVERED SOLDER TEMP. : 245±5°C WITH FRESH SOLDER. FLUX : ROSIN DIP TIME : 4±1 SECONDS THERMAL SHOCK INDUCTANCE SHALL ROOM TEMP. -25±2°C TEST NOT CHANGE MORE 15 MINUTES 30 MINUTES THAN ±20% ( TEMP. CYCLE ) ROOM TEMP. 85±2°C 15 MINUTES 30 MINUTES TOTAL : 50 CYCLES HUMIDITY TEMPERATURE : 40±2°C RESISTANCE TEST HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS HIGH TEMP. TEMPERATURE : 85±2°C RESISTANCE TEST APPLIED CURRENT : PER SPEC. TIME : 500 HOURS NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 SMD POWER INDUCTORS SDC0603 SERIES 9. UL CARD : GUANGDONG CHINA Mtl Dsg BC Coating Type TC __ __ __ ANSI Type __ TI NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5