SOGC 45, 46 Vishay Dale Thick Film Resistor Networks, Dual-In-Line Small Outline Molded Dip 45 & 46 Schematics FEATURES • 0.110" [2.79] maximum seated height • • • • • • • • Available Rugged, molded case construction 0.050" [1.27] lead spacing e1 Reduces total assembly costs Compatible with automatic surface mounting RoHS* COMPLIANT equipment Uniform performance characteristics Meets EIA PDP 100, SOGN-0003 outline dimensions Available in tube pack or tape and reel pack Lead (Pb)-free version is RoHS compliant STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL CIRCUIT SCHEMATIC RESISTOR CIRCUIT W at 70 °C PACKAGE POWER W at 70 °C TOLERANCE ±% RESISTANCE VALUES Ω OPERATING VOLTAGE VDC TEMPERATURE COEFFICIENT ± ppm/°C 45 0.1 1.6 2 180, 270, 820 50 max 100 46 0.1 1.6 2 330, 150, 330 50 max 100 45 0.1 2.0 2 180, 270, 820 50 max 100 46 0.1 2.0 2 330, 150, 330 50 max 100 SOGC16 SOGC20 TECHNICAL SPECIFICATIONS PARAMETER Package Power Rating (Maximum at + 70 °C) TCR Tracking (- 55 °C to + 125 °C) Voltage Coefficient of Resistance Maximum Operating Voltage Operating Temperature Range Storage Temperature Range UNIT W ppm/°C ppm/V VDC °C °C S0GC16 1.6 SOGC20 2.0 ± 50 < 50 typical 50 - 55 to + 125 - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Marking Resistance to Solvents Maximum Solder Reflow Temperature Solderability Terminals Body Model number, schematic number, value, tolerance, pin 1 indicator, date code Permanency testing per MIL-STD-202, Method 215 + 255 °C Per MIL-STD-202, Method 208E Copper alloy. Solder dipped terminal Molded epoxy GLOBAL PART NUMBER INFORMATION New Global Part Numbering: SOGC1646DC (preferred part numbering format) S GLOBAL MODEL SOGC O G C PIN COUNT 16 20 1 6 4 6 D C SCHEMATIC 45 = TTL/ECL Translator 46 = Signal Terminator PACKAGING EJ = Lead (Pb)-free, Tube EA = Lead (Pb)-free, Tape & Reel DC = Tin/Lead, Tube RZ = Tin/Lead, Tape & Reel Historical Part Number example: SOGC1646 (will continue to be accepted) SPECIAL Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable SOGC 16 46 D02 HISTORICAL MODEL PIN COUNT SCHEMATIC PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 324 For technical questions, contact: [email protected] Document Number: 31507 Revision: 21-Aug-06 SOGC 45, 46 Thick Film Resistor Networks, Dual-In-Line Small Outline Molded Dip 45 & 46 Schematics Vishay Dale DIMENSIONS in inches [millimeters] B 0.105 [2.67] 0.050 [1.27] Non-Accum. Typ. 0.018 [0.457] Typ. 0.100 [2.54] 0.006 [0.152] Max. Typ. 0.406 ± 0.012 [10.31 ± 0.305] 0.295 [7.49] SOGC 0.010 ± 0.005 [0.254 ± 0.127] GLOBAL MODEL Pin 1 0.045 [1.14] 0.008 [0.203] 0.045 [1.14] Ref. A 0.028 ± 0.010 [0.711 ± 0.254] Typ. A B SOGC16 0.440 [11.18] 0.350 [8.89] SOGC20 0.540 [13.72] 0.450 [11.43] CIRCUIT APPLICATIONS 45 Schematic TTL Inputs VCC 180 Ω TTL to ECL translator The SOGCxx45 network consists of resistors of 3 different values, internally divided into 6 or 8 identical three (3) resistor sections for TTL to ECL translation. 270 Ω 820 Ω VCC VEE Outputs to ECL Pin 1 SOGC16, SOGC20 46 Schematic 330 Ω 150 Ω 330 Ω Power Rating (Watts) Pin 1 SCSI-BUS signal terminator The SOGCxx46 network consists of resistors of 2 different values, internally divided into 7 or 9 identical three (3) resistor sections for SCSI-BUS terminator applications. SOGC16, SOGC20 PERFORMANCE SOGC20 Pkg. 2.0 TEST SOGC16 Pkg. 1.6 Power Conditioning Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Vibration Load Life Terminal Strength Insulation Resistance Dielectric Withstanding Voltage 1.0 Single Resistor 0.10 0.50 Derating Document Number: 31507 Revision: 21-Aug-06 0 + 25 + 70 + 125 + 150 Ambient Temperature °C MAX. ΔR (TYPICAL TEST LOTS) ± 0.50 % ΔR ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR ± 0.25 % ΔR 10 000 MΩ (minimum) No evidence of arcing or damage (200 V RMS for 1 minute) • Test methods per MIL-STD-202 For technical questions, contact: [email protected] www.vishay.com 325 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1