TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW IF Filter 403.5MHz (SMD 3.8×3.8 mm) TST Parts No.: TB0261A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 10,8 ,2004 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 403.5MHz (SMD 3.8×3.8 mm) MODEL NO.: TB0261A REV. NO.: 1 RoHS Compliant Lead free Lead-free soldering A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.Operating Temperature: -10°C to 60°C 3.Storage Temperature: -40°C to 85°C B. ELECTRICAL CHARACTERISTICS: Characteristics Value Typ. Max. Min. Center frequency FC MHz - 3 1dB Bandwidth MHz Minimum insertion loss. dB Ripple ( 402MHz……405MHz) dB Phase linearity ( 402 MHz……405 MHz) (rms)˚ Return Loss (Input and Output) dB Attenuation:( Reference level from Minimum insertion loss ) (1) 303.5MHz~384MHz 25 (2) 384MHz~399MHz 20 (3) 408MHz~423MHz 20 (4) 423MHz~503.5MHz 25 Note 403.5 - - 3.9 - - 4.7 0.8 1.6 9 5.5 1.5 - - 35 26 25 31 - - C. MEASUREMENT CIRCUIT: 1. Single Input to Single Output TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 2. Single Input to Balanced Output Note: The device balun can offer about 0.6dB loss additionally. D.FREQUENCY CHRACTERISTICS: 1. Response of S21: Horizontal: 3MHz/Div Vertical: 5dB/Div TAI-SAW TECHNOLOGY CO., LTD. Reference: -25dB TST DCC Release document 3 (2) Passband of Response: Group Delay and Ripple, Horizontal:1 MHz/Div Vertical 1: 1 dB/Div Vertical 2: 100 nS/Div (3) Wide band of Response: Horizontal: 6MHz/Div Vertical: 5dB/Div Reference: -25dB TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 E.OUTLINE DRAWING: F. PCB FOOTPRINT TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1.REEL DIMENSION 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6